Install SQL 2K cluster failed. Any Help?
Saso
Setup failed to perform required operations on the cluster nodes.
Here is part copy of the log. what reason cause this case?
16:41:52 Setup is performing required operations on cluster nodes. This may
take a few minutes...
16:41:52 E:\WINNT\TEMP\SqlSetup\Bin\remsetup.exe E:\WINNT\remsetup.ini
16:42:48 Process Exit Code: (2) The system cannot find the file specified.
16:42:48 Begin Action : GetRemsetupRetCode
16:42:48 Installation return status on DMS1 : 2
16:42:48 Installation return status on DMS2 : 2
16:42:48 End Action : GetRemsetupRetCode
#### SQL Server Remote Setup - Start Time 07/10/02 16:41:52 ####
CThreadPool::RunUntilCompleteHlpr create thread, index=0
CThread::Run thread [0x94] created for execution.
CThread::Process [0x94]
CThreadPool::RunUntilCompleteHlpr create thread, index=1
Running '\\DMS1\D$\x86\setup\setupsql.exe k=Nb k=Rm k=Cl -SMS -s -f
"\\DMS1\D$\x86\setup\setup.ins" -f1 \\DMS1\admin$\DMS1_MSSQLSERVER.iss -f2
"\\DMS1\admin$\setup.log" -e "stpsilnt._ex" -b -x "E:\WINNT\TEMP\"' (DMS1)
...
CThread::Run thread [0x98] created for execution.
CThread::Process [0x98]
CThreadPool::RunUntilCompleteHlpr start thread [0x94],index=0
CThreadPool::RunUntilCompleteHlpr start thread [0x98],index=1
Script file copied to '\\DMS2\ADMIN$\DMS2_MSSQLSERVER.iss' successfully.
Installing remote service (DMS2)...
CProcess::RunUntilComplete [0x94] exit code: 2
Remote process exit code was '2' (DMS1).
CThreadPool::RunUntilCompleteHlpr WaitForMultipleObjects returned: 0
CThreadPool::RunUntilCompleteHlpr signaled thread [0x94]
Thread [0x94] exit code: [0x2]
Running '\\DMS1\D$\x86\setup\setupsql.exe k=ClSec k=Rm k=Cl -SMS -s -f
"\\DMS1\D$\x86\setup\setup.ins" -f1 \\DMS2\ADMIN$\DMS2_MSSQLSERVER.iss -f2
"\\DMS2\admin$\setup.log" -e "stpsilnt._ex" -x "E:\"' (DMS2) ...
CRemoteProcess::RunUntilComplete [0x98] exit code: 2
Remote process exit code was '2' (DMS2).
CThreadPool::RunUntilCompleteHlpr WaitForMultipleObjects returned: 2
CThreadPool::RunUntilCompleteHlpr signaled thread [0x98]
Thread [0x98] exit code: [0x2]
CThreadPool::RunUntilComplete returned 2
CThreadPool::RunUntilComplete execution level=1, need execution: 0
One or more errors occurred while running the remote/unattended setups.
Disconnecting from remote machine (DMS1)...
Service removed successfully.
Remote files could not be removed.
#### SQL Server Remote Setup - Stop Time 07/10/02 16:42:31 ####
Disconnecting from remote machine (DMS2)...
Service removed successfully.
Remote files removed successfully.
#### SQL Server Remote Setup - Stop Time 07/10/02 16:42:48 ####
16:42:48 End Action : Run setup on cluster nodes
16:42:48 One or more errors occurred while running remote setup on the
clustered machines.
16:43:40 Setup failed to perform required operations on the cluster nodes.
16:43:40 Begin Action : ClusterErrorCleanup
16:43:40 End Action : ClusterErrorCleanup
16:43:40 End Action : ClusterSetupHelper
Hina Masud [MS]
On both the nodes stop all services in control panel services besides:
- Alerter
- Computer Browser
- Distributed File System
- Distributed Link Tracking Client
- Distributed Link Tracking Server
- DNS Client
- Event Log
- IPSEC Policy Agent
- License Logging Service
- Logical Disk Manager
- Messenger
- Net Logon
- NT LM Security Support Provider
- Network Connectors
- Plug and Play
- Process Control
- Remote Procedure Call (RPC) Locator
- Remote Procedure Call (RPC) Service
- Remote Registry Service
- Removable Storage
- RunAs Service
- Security Accounts Manager
- Server
- Spooler
- TCP/IP NetBIOS Helper
- Time Service
- Windows Management Instrumentation Driver Extensions
- Windows Time
- Workstation
and then try running setup.
Thank you
Hina Masud
Microsoft
Disclaimer:
This posting is provided AS IS with no warranties, and confers no rights.
Get Secure! -> http://www.microsoft.com/security
--------------------
-From: "Saso" <s.sta...@ads.gov.mk>
-Subject: Install SQL 2K cluster failed. Any Help?
-Date: Wed, 10 Jul 2002 17:21:29 +0200
-Lines: 85
-X-Priority: 3
-X-MSMail-Priority: Normal
-X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
-X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
-Message-ID: <ObGGwXCKCHA.1748@tkmsftngp09>
-Newsgroups: microsoft.public.sqlserver.clustering
-NNTP-Posting-Host: 62.162.123.70
-Path: cpmsftngxa07!tkmsftngp01!tkmsftngp09
-Xref: cpmsftngxa07 microsoft.public.sqlserver.clustering:6743
-X-Tomcat-NG: microsoft.public.sqlserver.clustering
-
-I attempt to install SQL 2000 cluster, I get an error :
-
-Setup failed to perform required operations on the cluster nodes.
-
-
-Here is part copy of the log. what reason cause this case?
-
-
-
-
-16:41:52 Setup is performing required operations on cluster nodes. This may
-take a few minutes...
-16:41:52 E:\WINNT\TEMP\SqlSetup\Bin\remsetup.exe E:\WINNT\remsetup.ini
-16:42:48 Process Exit Code: (2) The system cannot find the file specified.
-
-16:42:48 Begin Action : GetRemsetupRetCode
-16:42:48 Installation return status on DMS1 : 2
-16:42:48 Installation return status on DMS2 : 2
-16:42:48 End Action : GetRemsetupRetCode
-#### SQL Server Remote Setup - Start Time 07/10/02 16:41:52 ####
-
-CThreadPool::RunUntilCompleteHlpr create thread, index=0
-CThread::Run thread [0x94] created for execution.
-CThread::Process [0x94]
-CThreadPool::RunUntilCompleteHlpr create thread, index=1
-Running '\\DMS1\D$\x86\setup\setupsql.exe k=Nb k=Rm k=Cl -SMS -s -f
-"\\DMS1\D$\x86\setup\setup.ins" -f1 \\DMS1\admin$\DMS1_MSSQLSERVER.iss -f2
-"\\DMS1\admin$\setup.log" -e "stpsilnt._ex" -b -x "E:\WINNT\TEMP\"' (DMS1)
-...
-
-CThread::Run thread [0x98] created for execution.
-CThread::Process [0x98]
-CThreadPool::RunUntilCompleteHlpr start thread [0x94],index=0
-CThreadPool::RunUntilCompleteHlpr start thread [0x98],index=1
-Script file copied to '\\DMS2\ADMIN$\DMS2_MSSQLSERVER.iss' successfully.
-
-Installing remote service (DMS2)...
-
-CProcess::RunUntilComplete [0x94] exit code: 2
-Remote process exit code was '2' (DMS1).
-
-CThreadPool::RunUntilCompleteHlpr WaitForMultipleObjects returned: 0
-CThreadPool::RunUntilCompleteHlpr signaled thread [0x94]
-Thread [0x94] exit code: [0x2]
-Running '\\DMS1\D$\x86\setup\setupsql.exe k=ClSec k=Rm k=Cl -SMS -s -f
-"\\DMS1\D$\x86\setup\setup.ins" -f1 \\DMS2\ADMIN$\DMS2_MSSQLSERVER.iss -f2
-"\\DMS2\admin$\setup.log" -e "stpsilnt._ex" -x "E:\"' (DMS2) ...
-
-CRemoteProcess::RunUntilComplete [0x98] exit code: 2
-Remote process exit code was '2' (DMS2).
-
-CThreadPool::RunUntilCompleteHlpr WaitForMultipleObjects returned: 2
-CThreadPool::RunUntilCompleteHlpr signaled thread [0x98]
-Thread [0x98] exit code: [0x2]
-CThreadPool::RunUntilComplete returned 2
-CThreadPool::RunUntilComplete execution level=1, need execution: 0
-One or more errors occurred while running the remote/unattended setups.
-
-Disconnecting from remote machine (DMS1)...
-
-Service removed successfully.
-
-Remote files could not be removed.
-
-#### SQL Server Remote Setup - Stop Time 07/10/02 16:42:31 ####
-
-Disconnecting from remote machine (DMS2)...
-
-Service removed successfully.
-
-Remote files removed successfully.
-
-#### SQL Server Remote Setup - Stop Time 07/10/02 16:42:48 ####
-
-
-
-16:42:48 End Action : Run setup on cluster nodes
-16:42:48 One or more errors occurred while running remote setup on the
-clustered machines.
-16:43:40 Setup failed to perform required operations on the cluster nodes.
-16:43:40 Begin Action : ClusterErrorCleanup
-16:43:40 End Action : ClusterErrorCleanup
-16:43:40 End Action : ClusterSetupHelper
-
-
-
Paul Lynch
wrote:
>I attempt to install SQL 2000 cluster, I get an error :
>
>Setup failed to perform required operations on the cluster nodes.
>
>
>Here is part copy of the log. what reason cause this case?
Does this apply ?
http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q302491
HTH,
Paul Lynch
MCSE
Chris Skorlinski (MS)
The Cluster setup program tries to install setup files on the second node,
then execute those files to pull the SQL binaries from the first node.
E:\WINNT\TEMP\SqlSetup\Bin\remsetup.exe E:\WINNT\remsetup.ini
Make sure you are logged on a Cluster Administrator who should be an
Administrator of both nodes.
Make sure you can see the ADMIN$ share from both nodes. For example, from
DMS1 node can you type in "\\DMS2\Admin$" and from the DMS2 node can you
type in "\\DMS1\Admin$" to verify connectivity back to node 1.
It also looks like D$ is your shared CD-ROM with your original SQL Server
CD. Try creating a shared folder on DMS1 node and copying all of the SQL
Server CD to that folder, then run the setup from that folder.
You may find out more by looking at the SQL*.logs in the WINNT folder of
DMS2 node.
Let us know what happens.
Chris Skorlinski, MCDBA
Microsoft SQL Server Support