info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Unixware 2.1.3 and Digiportserver
0 views
Skip to first unread message
Leif Ehn
May 12, 1999, 3:00:00 AM5/12/99
to
I have a Unixware 2.1.3 and a Digiportserver. Some times when writing to one
of the ports I get a warning message in the "osmlog"
"WARNING: strintercept dropping message". What is that and hove to fix it
The things writed to the port goes to the binary universe.
of the ports I get a warning message in the "osmlog"
"WARNING: strintercept dropping message". What is that and hove to fix it
The things writed to the port goes to the binary universe.
tcg...@my-dejanews.com
May 12, 1999, 3:00:00 AM5/12/99
to
In article <37396...@d2o70.telia.com>,
Hej Du! Hur ligger det till?
We are running some digi ports on 2.1.2 and the driver is (via pkginfo)
mpi (MenuPort Interface) version 3.0.0, and we don't have any problems
like that. What version are you running of the drivers? Perhaps I
should not update to 2.1.3?
Tom
--== Sent via Deja.com http://www.deja.com/ ==--
---Share what you know. Learn what you don't.---
Todd Fuller
May 13, 1999, 3:00:00 AM5/13/99
to
If this is a digi portserver (ethernet) then the problem is most likely
network traffic. Portservers use about 35% of a 10Mbps link almost all of
the time. Even if they
aren't doing anything. The problem drove us nuts until we dedicated an
ethernet
card in the server to it.
network traffic. Portservers use about 35% of a 10Mbps link almost all of
the time. Even if they
aren't doing anything. The problem drove us nuts until we dedicated an
ethernet
card in the server to it.
0 new messages