Missing Disk Information & Inaccurate Temperatures in GKrellM with compiled Kernel v2.4.20

[ANT...@zimage.com]

Hi. I downloaded, configured, compiled, and installed Kernel 2.4.20,
lm_sensors v2.6.5, and GKrellM v1.2.13 recently for my Red Hat Linux
v7.2 box. I think I got almost everything working except:

1. Two inaccurate temperature readings in GKrellM. Sensors command
shows correct readings:

[ant@ANTux-AXP ant]$ sensors -f
as99127f-i2c-0-2d
Adapter: SMBus Via Pro adapter at e800
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.68 V (min = +4.08 V, max = +4.08 V)
VCore 2: +1.68 V (min = +4.08 V, max = +4.08 V)
+3.3V: +3.28 V (min = +2.97 V, max = +3.63 V)
+5V: +4.94 V (min = +4.50 V, max = +5.48 V)
+12V: +12.39 V (min = +10.79 V, max = +13.11 V)
-12V: -12.95 V (min = -0.00 V, max = -0.00 V)
-5V: -4.91 V (min = -0.00 V, max = -0.00 V)
fan1: 0 RPM (min = 3000 RPM, div = 2)
fan2: 3214 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2)
temp1: +95°F (limit = +140°F)
temp2: +132.8°F (limit = +248°F, hysteresis = +212°F)
temp3: +57.2°F (limit = +248°F, hysteresis = +212°F)
vid: +1.650 V
alarms:
beep_enable:
Sound alarm enabled

arp-i2c-0-61
Adapter: SMBus Via Pro adapter at e800
Algorithm: Non-I2C SMBus adapter

GKrellM showed (all in F degrees): 95.0 (temp1 -- looks correct), 92.4
(temp2), and 44.6 (temp3). All are factor of 1.0000 (tried to do math
but that didn't work).

2. Missing disk status information in GKrellM (no read and write values).

My computer configuration (primary computer):
http://alpha.zimage.com/~ant/antfarm/about/computers.txt

This is a little off-topic, but how do I turn off the sound alarm feature?

Did I misconfigure something? Thank you in advance.
--
"Everything tastes better at a picnic... the ants, the sand,
everything." --unknown
/\___/\
/ /\ /\ \ Ant @ The Ant Farm: http://antfarm.ma.cx
| |o o| | E-mail: phi...@earthlink.netANT or phi...@apu.eduANT
\ _ / Remove ANT if replying by e-mail from a newsgroup.
( )