We have been tasked to analyze several expansive wireless networks for
functional, performance and security issues. So, we are investigating
how far we can go with debian-based laptops?
Yes, I have done several apt-cache search's, and found several
applications that may serve us well.
What we have not found is any website or howto that compares/contrasts
any of these apps, or goes into detail as to what to do and what not to
do.
What do you think?
--
Best Regards,
mds
mds resource
877.596.8237
-
Dare to fix things before they break . . .
-
Our capacity for understanding is inversely proportional to how much
we think we know. The more I know, the more I know I don't know . . .
--
Here's a good example of our confusion:
# uname -a
Linux freya 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686 unknown
# sudo lsmod
Module Size Used by Not tainted
orinoco_cs 4680 2
orinoco 29568 0 [orinoco_cs]
hermes 3296 0 [orinoco_cs orinoco]
ds 6624 2 [orinoco_cs]
i82365 22384 2
pcmcia_core 41376 0 [orinoco_cs ds i82365]
sb 7296 0 (unused)
sb_lib 32224 0 [sb]
uart401 5984 0 [sb_lib]
sound 52844 0 [sb_lib uart401]
soundcore 3204 5 [sb_lib sound]
isa-pnp 27400 0 [sb]
keybdev 1664 0 (unused)
usbkbd 2848 0 (unused)
input 3040 0 [keybdev usbkbd]
usb-uhci 20676 0 (unused)
usbcore 48000 1 [usbkbd usb-uhci]
Should airsnort work with this configuration? I keep getting this
message:
`Could not set monitor mode'
Google is decidedly silent about this error ;<
Or, kismet, another example, does not appear to like the orinoco gold
card:
# sudo kismet_monitor
Using //etc/kismet/kismet.conf sources...
Enabling monitor mode for an orinoco card on eth0 channel 6
Invalid command : monitor
# sudo iwpriv eth0
eth0 Available private ioctl :
force_reset (8BE0) : set 0 & get 0
card_reset (8BE1) : set 0 & get 0
set_port3 (8BE2) : set 1 int & get 0
get_port3 (8BE3) : set 0 & get 1 int
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 1 int
set_ibssport (8BE6) : set 1 int & get 0
get_ibssport (8BE7) : set 0 & get 1 int
We have seen reference to some `snax' patch; but, I have not found
anything debian about it.
Elsewise, there are the linux-wlan-ng-modules-*, all of which apparently
require kernels 2.4.20 and above; which, of course, begs the question:
is full wireless support a function of the kernel?
Moreover, are stock debian kernels adequate to all wireless tasks? Or,
need we compile our own?
We are confused and no brighter for our research . . .
Secondly, the orinoco_cs driver is only recently becoming half decent
(although still not there, IMHO). The recent kernels (2.4.21 and .22-pre
releases) all use the latest orinoco 0.13 driver, which is likely not
available in 2.4.18-bf2.4. If you want to stay with the orinoco driver,
try a more recent kernel release, or try compiling your own orinoco
drivers from
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Orinoco.html.
After many hassles with the orinoco driver (it still fails under heavy
load) I switched to the linux-wlan-ng drivers, which haven't failed me
yet. The installation is very straightforward and simple (if you have
already got kernel sources installed - for pcmcia-cs). The driver for
11Mbs cards is at:
ftp.linux-wlan.org/pub/linux-wlan-ng
Lastly, although I have never seen your airsnort error message, I have
successfully used airsnort with the linux-wlan-ng drivers.
Damien
~~~~~~~~~~~~~~~~~~~~~~~~~~
Linux on the Inspiron 1100
http://geocities.com/randomnumbergenerator2001/
--
To UNSUBSCRIBE, email to debian-us...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org