
Hey Bradley,
The point reordering just hit my eyes. We had recently had issues with similar stuff, one of our artist working in max, and his exported meshes are always reordered. Can you elaborate me, how to exactly I can use ICE for reordering?
Thanks!
Szabolcs Matefy
From: softimag...@listproc.autodesk.com [mailto:softimag...@listproc.autodesk.com] On Behalf Of Bradley Gabe
Sent: Friday, February 18, 2011 1:13 AM
To: soft...@listproc.autodesk.com
Subject: ICE - The Universal Swiss Army Knife For Production
I turned to my office mate and asked, "Did I mention today yet how much I love ICE?" and he replied "not yet, but it seems to be a daily thing with you." So it got me to thinking, it might be fun (and useful) to start up a thread about the 1001 daily production uses for ICE technology that nobody thought about when it was being designed.
the test had :
(1)- original grid
(2)- grid with different order
(3)- grid with different order with deformation
goal :
get grid (1) to match the shape on grid (3)
It uses get closest point to find the point on a mesh with different
point order and read the shape stored as attribute on that point.
Then use it to deform.
This approach would need the base point position to match in order to
find the "correct" point.
http://sawamura.neorack.com/temp/ordered_shape.rar
-edy
On 2/18/2011 7:57 PM, Sandy Sutherland wrote:
> Brad - any chance of letting us have the Point Order repair - or some
> insight how you did it??? Got something coming up that might find it
> rather usefull???
>
> Thanks
>
> Sandy
>
> On 2/18/2011 2:13 AM, Bradley Gabe wrote:
>> I turned to my office mate and asked, "Did I mention today yet how
>> much I love ICE?" and he replied "not yet, but it seems to be a daily
>> thing with you." So it got me to thinking, it might be fun (and
>> useful) to start up a thread about the 1001 daily production uses for
>> ICE technology that nobody thought about when it was being designed.
>>
>> Since I'm starting the thread, I want to toss out a couple of rules.
>> *No feature requests, and no complaints about bugs*.
>> This is all about compiling a list, in public, of all the unexpected,
>> creative production solutions we find on a day-to-day basis that makes
>> ICE such an invaluable production tool:
>>
>>
>> *1) Weight Map Symmetry: *I spent hours this morning fine tuning some
>> painted weights on about 10 weight maps before I realized symmetry was
>> turned off on my weight brush. My mesh is non symmetrical now, and the
>> original symmetry map went missing. No problem, ICE to the rescue.
>> Project each point on the left side of the model to a mirror location
>> in space, and grab the weight map data to the closest location on
>> itself, then set the weight map values to the new data.
>>
>> *2) Point Order Repair:* One of my creature artists spent days working
>> on some shapes sculpts for a creature I was rigging. In the time he
>> was sculpting and I was setting up deforms, our mesh point orders got
>> scrambled. ICE to the rescue. Get the ID of each point on one of his
>> meshes that lined up with one of mine, and store that data in a shape
>> node on my mesh. Use ICE to convert ID's between my rig mesh, and his
>> shape meshes for pulling Point Position data.
>>
>> *3) Weight Map Compositing:* I needed to create weight maps to isolate
>> an upper eyelid from a lower eyelid. I painted the border for the
>> upper eyelid with care, then very quickly and sloppily painted the
>> lower lid weight map and used ICE to subtract the upper lid weights
>> from the lower lid.
>>
>> *4) ROM min/max calculations:* I have mocap of a facial ROM
- Symmetrical shapes
- easy geometry constraints (stick to a polygon, point, slide on mesh
surface, shrinkwrap meshes, closest location lookups to nulls, etc.)
- UV "shapes" (blending between 2 sets of UVs on a same object -- was
used to ease warping of the texture when the object changed form
completely.)
- cleaner "Clone" alternative
I'm sure I'm forgetting some more.
On Thu, Feb 17, 2011 at 7:13 PM, Bradley Gabe <with...@gmail.com> wrote:
>
> I turned to my office mate and asked, "Did I mention today yet how much I love ICE?" and he replied "not yet, but it seems to be a daily thing with you." So it got me to thinking, it might be fun (and useful) to start up a thread about the 1001 daily production uses for ICE technology that nobody thought about when it was being designed.
>
> Since I'm starting the thread, I want to toss out a couple of rules. No feature requests, and no complaints about bugs.
Interestingly the 2 top requested features for 3DS Max are:
Python
https://autodesk.uservoice.com/forums/80701-publicsdkandscriptingenhancements
_rob
From: softimag...@listproc.autodesk.com
[mailto:softimag...@listproc.autodesk.com] On Behalf Of Bradley Gabe
Sent: February-17-11 7:13 PM
To: soft...@listproc.autodesk.com
Subject: ICE - The Universal Swiss Army Knife For Production
I turned to my office mate and asked, "Did I mention today yet how much I love ICE?" and he replied "not yet, but it seems to be a daily thing with you." So it got me to thinking, it might be fun (and useful) to start up a thread about the 1001 daily production uses for ICE technology that nobody thought about when it was being designed.
Animation transfer from dissimilar rigs: One of the uses I have used Ice in previous productions was for blending animation from two or more different rigs that share common geometry. One of the challenges I had on "Shorts" was to mutate the Booger monster from a embryonic tadpole looking pile of goo to its full sized shape. Using three models of the monster, 1 rigged adult, 1 rigged tadpole (adult geo reshaped), and the original model without any rig which will have the ice tree that blends the animation from the small rig to the big rig. Using the power of ice and the level of control it gives you over weight maps, I was to use create a subtle bubbling effect as it transitioned from the small monster to the big one. Granted it was one of the first shots I was using ICE so there is probably a more efficient method then described above, but the beauty of it was it only took an hour or so to achieve the desired effect.
Some other effects I did using this technique in "Shorts", the booger monster oozed over a stair case and form a blob at the bottom, as well as a shot where the booger monster gets zapped by a devolumizer raygun and is sucked into the gun.
Animation transfer from dissimilar rigs: One of the uses I have used Ice in previous productions was for blending animation from two or more different rigs that share common geometry. One of the challenges I had on "Shorts" was to mutate the Booger monster from a embryonic tadpole looking pile of goo to its full sized shape. Using three models of the monster, 1 rigged adult, 1 rigged tadpole (adult geo reshaped), and the original model without any rig which will have the ice tree that blends the animation from the small rig to the big rig. Using the power of ice and the level of control it gives you over weight maps, I was to use create a subtle bubbling effect as it transitioned from the small monster to the big one. Granted it was one of the first shots I was using ICE so there is probably a more efficient method then described above, but the beauty of it was it only took an hour or so to achieve the desired effect.
Some other effects I did using this technique in "Shorts", the booger monster oozed over a stair case and form a blob at the bottom, as well as a shot where the booger monster gets zapped by a devolumizer raygun and is sucked into the gun.
It already has.
From: softimag...@listproc.autodesk.com [mailto:softimag...@listproc.autodesk.com] On Behalf Of Williams, Wayne
Sent: Tuesday, February 22, 2011 12:00 PM
Subject: RE: ICE - The Universal Swiss Army Knife For Production
So are you saying ICE can stop the Zombie Apocalypse?
From: softimag...@listproc.autodesk.com [mailto:softimag...@listproc.autodesk.com] On Behalf Of Bradley Gabe
Sent: Tuesday, February 22, 2011 11:37 AM
To: soft...@listproc.autodesk.com
Subject: Re: ICE - The Universal Swiss Army Knife For Production
Here's one I did a while ago:
I used ICE for a genetics experiment, to simulate the distribution of viruses in a petri dish and see how different probabilities of infection over time result in different distribution morphologies.
When a lawn of bacteria are killed off, they leave behind an empty space which is called a plaque. Different viral infection probabilities generate different plaque shapes and sizes. ICE was the perfect dev environment for demonstrating this effect.
On Mon, Feb 21, 2011 at 8:52 PM, Raffaele Fragapane <raffsx...@googlemail.com<mailto:raffsx...@googlemail.com>> wrote:
Something we found out recently (on Soft's suggestion) that, while we're not using yet, is pretty damn useful:
Re-order constraints with ICE, including the pesky direction constraint that insists placing itself in the primary stack (a hidden distinction of course) regardless of order of creation.
From: softimag...@listproc.autodesk.com [mailto:softimag...@listproc.autodesk.com] On Behalf Of Williams, Wayne
Sent: Tuesday, February 22, 2011 12:00 PM
To: soft...@listproc.autodesk.com
Subject: RE: ICE - The Universal Swiss Army Knife For Production
So are you saying ICE can stop the Zombie Apocalypse?
From: softimag...@listproc.autodesk.com [mailto:softimag...@listproc.autodesk.com] On Behalf Of Bradley Gabe
Sent: Tuesday, February 22, 2011 11:37 AM
To: soft...@listproc.autodesk.com
Subject: Re: ICE - The Universal Swiss Army Knife For Production
Here's one I did a while ago:
I used ICE for a genetics experiment, to simulate the distribution of viruses in a petri dish and see how different probabilities of infection over time result in different distribution morphologies.
When a lawn of bacteria are killed off, they leave behind an empty space which is called a plaque. Different viral infection probabilities generate different plaque shapes and sizes. ICE was the perfect dev environment for demonstrating this effect.
So are you saying ICE can stop the Zombie Apocalypse?
From: softimag...@listproc.autodesk.com [mailto:softimag...@listproc.autodesk.com]
On Behalf Of Bradley Gabe
Sent: Tuesday, February 22, 2011 11:37 AM
To: soft...@listproc.autodesk.com
Subject: Re: ICE - The Universal Swiss Army Knife For Production
Here's one I did a while ago: