Can anybody tell me what can I do, if I can't load my scenes saved
previously and loaded perfectly this before?????? Suddenly Softimage
crashes on my scenes, and it seems that I lost whole 3 days of job.
However, there were no crashes, and no issues at all...What the hell is
going on????????
Cheers
Szabolcs
___
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Crytek GmbH - http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322 Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer: Avni Yerli, Cevat Yerli, Faruk Yerli
On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com> wrote:
> Can anybody tell me what can I do, if I can’t load my scenes saved
> previously and loaded perfectly this before?????? Suddenly Softimage crashes
> on my scenes, and it seems that I lost whole 3 days of job. However, there
> were no crashes, and no issues at all…What the hell is going on????????
> Cheers
> Szabolcs
> ___
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. E-mail transmission cannot be guaranteed to be
> secure or error-free as information could be intercepted, corrupted, lost,
> destroyed, arrive late or incomplete, or contain viruses. The sender
> therefore does not accept liability for any errors or omissions in the
> contents of this message, which arise as a result of e-mail transmission. If
> verification is required please request a hard-copy version. Crytek GmbH -
> http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
> Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer:
> Avni Yerli, Cevat Yerli, Faruk Yerli
-- Best regards,
Ben Houston
Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom
http://Exocortex.com - Passionate CG Software Professionals.
This may not be what you are looking for but, after you have tried
everything, you could try to open it with "Disable all geometry operators
on load" checked and/or some other options in the Scene Debugging tab.
If the scene is simple there may be some data you can recover.
On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
> I would suggest ensuring that no third party plugins are loaded at
> all. It could be you updated a plugin and that plugin is buggy.
> -ben
> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
> wrote:
> > Can anybody tell me what can I do, if I can’t load my scenes saved
> > previously and loaded perfectly this before?????? Suddenly Softimage
> crashes
> > on my scenes, and it seems that I lost whole 3 days of job. However,
> there
> > were no crashes, and no issues at all…What the hell is going on????????
> > Cheers
> > Szabolcs
> > ___
> > This message contains confidential information and is intended only for
> the
> > individual named. If you are not the named addressee you should not
> > disseminate, distribute or copy this e-mail. Please notify the sender
> > immediately by e-mail if you have received this e-mail by mistake and
> delete
> > this e-mail from your system. E-mail transmission cannot be guaranteed
> to be
> > secure or error-free as information could be intercepted, corrupted,
> lost,
> > destroyed, arrive late or incomplete, or contain viruses. The sender
> > therefore does not accept liability for any errors or omissions in the
> > contents of this message, which arise as a result of e-mail
> transmission. If
> > verification is required please request a hard-copy version. Crytek GmbH
> -
> > http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
> > Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
> Geschaeftsfuehrer:
> > Avni Yerli, Cevat Yerli, Faruk Yerli
-Try merging the scene into a new scene
- try load in a blank softimage and disabling all the viewports and then
load your scene
-have one viewport expanded and viewing the explorer window and then load
your scene
thats all I can think of off the top of my head, hope one works
On Thu, Jul 5, 2012 at 10:02 PM, Szabolcs Matefy <szabol...@crytek.com>wrote:
> Can anybody tell me what can I do, if I can’t load my scenes saved
> previously and loaded perfectly this before?????? Suddenly Softimage
> crashes on my scenes, and it seems that I lost whole 3 days of job.
> However, there were no crashes, and no issues at all…What the hell is going
> on????????****
> ** **
> ** **
> Cheers****
> ** **
> ** **
> Szabolcs****
> ___
> This message contains confidential information and is intended only for
> the individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.
> The sender therefore does not accept liability for any errors or omissions
> in the contents of this message, which arise as a result of e-mail
> transmission. If verification is required please request a hard-copy
> version. Crytek GmbH - http://www.crytek.com - Grüneburgweg 16-18, 60322
> Frankfurt - HRB77322 Amtsgericht Frankfurt a. Main- UST IdentNr.:
> DE20432461 - Geschaeftsfuehrer: Avni Yerli, Cevat Yerli, Faruk Yerli
Even merging with these option enabled is make xsi to crash...I'm really desperate, because two days of crunching job lost. I can't load even the previous (and previously perfectly loaded) scenes...
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Martin
Sent: Thursday, July 05, 2012 2:13 PM
To: b...@exocortex.com; softim...@listproc.autodesk.com
Subject: Re: WHATTA HELL???????
This may not be what you are looking for but, after you have tried everything, you could try to open it with "Disable all geometry operators on load" checked and/or some other options in the Scene Debugging tab.
If the scene is simple there may be some data you can recover.
M.Yara
On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
I would suggest ensuring that no third party plugins are loaded at
all. It could be you updated a plugin and that plugin is buggy.
-ben
On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com> wrote:
> Can anybody tell me what can I do, if I can't load my scenes saved
> previously and loaded perfectly this before?????? Suddenly Softimage crashes
> on my scenes, and it seems that I lost whole 3 days of job. However, there
> were no crashes, and no issues at all...What the hell is going on????????
> Cheers
> Szabolcs
> ___
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. E-mail transmission cannot be guaranteed to be
> secure or error-free as information could be intercepted, corrupted, lost,
> destroyed, arrive late or incomplete, or contain viruses. The sender
> therefore does not accept liability for any errors or omissions in the
> contents of this message, which arise as a result of e-mail transmission. If
> verification is required please request a hard-copy version. Crytek GmbH -
> http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
> Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer:
> Avni Yerli, Cevat Yerli, Faruk Yerli
--
Best regards,
Ben Houston
Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom
http://Exocortex.com - Passionate CG Software Professionals.
On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com> wrote:
> Have a look in the Backup folder within the project there should be 4
> backups of that scene do those load?
> On 5 July 2012 13:12, Martin <furik...@gmail.com> wrote:
>> This may not be what you are looking for but, after you have tried
>> everything, you could try to open it with "Disable all geometry operators
>> on load" checked and/or some other options in the Scene Debugging tab.
>> If the scene is simple there may be some data you can recover.
>> M.Yara
>> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
>>> I would suggest ensuring that no third party plugins are loaded at
>>> all. It could be you updated a plugin and that plugin is buggy.
>>> -ben
>>> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
>>> wrote:
>>> > Can anybody tell me what can I do, if I can’t load my scenes saved
>>> > previously and loaded perfectly this before?????? Suddenly Softimage
>>> crashes
>>> > on my scenes, and it seems that I lost whole 3 days of job. However,
>>> there
>>> > were no crashes, and no issues at all…What the hell is going on????????
>>> > Cheers
>>> > Szabolcs
>>> > ___
>>> > This message contains confidential information and is intended only
>>> for the
>>> > individual named. If you are not the named addressee you should not
>>> > disseminate, distribute or copy this e-mail. Please notify the sender
>>> > immediately by e-mail if you have received this e-mail by mistake and
>>> delete
>>> > this e-mail from your system. E-mail transmission cannot be guaranteed
>>> to be
>>> > secure or error-free as information could be intercepted, corrupted,
>>> lost,
>>> > destroyed, arrive late or incomplete, or contain viruses. The sender
>>> > therefore does not accept liability for any errors or omissions in the
>>> > contents of this message, which arise as a result of e-mail
>>> transmission. If
>>> > verification is required please request a hard-copy version. Crytek
>>> GmbH -
>>> > http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
>>> > Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
>>> Geschaeftsfuehrer:
>>> > Avni Yerli, Cevat Yerli, Faruk Yerli
> This may not be what you are looking for but, after you have tried
> everything, you could try to open it with "Disable all geometry operators
> on load" checked and/or some other options in the Scene Debugging tab.
> If the scene is simple there may be some data you can recover.
> M.Yara
> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
>> I would suggest ensuring that no third party plugins are loaded at
>> all. It could be you updated a plugin and that plugin is buggy.
>> -ben
>> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
>> wrote:
>> > Can anybody tell me what can I do, if I can’t load my scenes saved
>> > previously and loaded perfectly this before?????? Suddenly Softimage
>> crashes
>> > on my scenes, and it seems that I lost whole 3 days of job. However,
>> there
>> > were no crashes, and no issues at all…What the hell is going on????????
>> > Cheers
>> > Szabolcs
>> > ___
>> > This message contains confidential information and is intended only for
>> the
>> > individual named. If you are not the named addressee you should not
>> > disseminate, distribute or copy this e-mail. Please notify the sender
>> > immediately by e-mail if you have received this e-mail by mistake and
>> delete
>> > this e-mail from your system. E-mail transmission cannot be guaranteed
>> to be
>> > secure or error-free as information could be intercepted, corrupted,
>> lost,
>> > destroyed, arrive late or incomplete, or contain viruses. The sender
>> > therefore does not accept liability for any errors or omissions in the
>> > contents of this message, which arise as a result of e-mail
>> transmission. If
>> > verification is required please request a hard-copy version. Crytek
>> GmbH -
>> > http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
>> > Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
>> Geschaeftsfuehrer:
>> > Avni Yerli, Cevat Yerli, Faruk Yerli
> On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com>wrote:
>> Have a look in the Backup folder within the project there should be 4
>> backups of that scene do those load?
>> On 5 July 2012 13:12, Martin <furik...@gmail.com> wrote:
>>> This may not be what you are looking for but, after you have tried
>>> everything, you could try to open it with "Disable all geometry operators
>>> on load" checked and/or some other options in the Scene Debugging tab.
>>> If the scene is simple there may be some data you can recover.
>>> M.Yara
>>> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
>>>> I would suggest ensuring that no third party plugins are loaded at
>>>> all. It could be you updated a plugin and that plugin is buggy.
>>>> -ben
>>>> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
>>>> wrote:
>>>> > Can anybody tell me what can I do, if I can’t load my scenes saved
>>>> > previously and loaded perfectly this before?????? Suddenly Softimage
>>>> crashes
>>>> > on my scenes, and it seems that I lost whole 3 days of job. However,
>>>> there
>>>> > were no crashes, and no issues at all…What the hell is going
>>>> on????????
>>>> > Cheers
>>>> > Szabolcs
>>>> > ___
>>>> > This message contains confidential information and is intended only
>>>> for the
>>>> > individual named. If you are not the named addressee you should not
>>>> > disseminate, distribute or copy this e-mail. Please notify the sender
>>>> > immediately by e-mail if you have received this e-mail by mistake and
>>>> delete
>>>> > this e-mail from your system. E-mail transmission cannot be
>>>> guaranteed to be
>>>> > secure or error-free as information could be intercepted, corrupted,
>>>> lost,
>>>> > destroyed, arrive late or incomplete, or contain viruses. The sender
>>>> > therefore does not accept liability for any errors or omissions in the
>>>> > contents of this message, which arise as a result of e-mail
>>>> transmission. If
>>>> > verification is required please request a hard-copy version. Crytek
>>>> GmbH -
>>>> > http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt -
>>>> HRB77322
>>>> > Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
>>>> Geschaeftsfuehrer:
>>>> > Avni Yerli, Cevat Yerli, Faruk Yerli
I sacrifice a black rooster, maybe Baron Samedi will help to fix this...
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Peter Agg
Sent: Thursday, July 05, 2012 2:25 PM
To: softim...@listproc.autodesk.com
Subject: Re: WHATTA HELL???????
Try unloading any reference models using the scntoc file. That has sometimes helped to narrow down the problem for me.
On 5 July 2012 13:19, Simon Anderson <simonbenandersonl...@gmail.com> wrote:
are you using softimage 2010?
On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com> wrote:
Have a look in the Backup folder within the project there should be 4 backups of that scene do those load?
On 5 July 2012 13:12, Martin <furik...@gmail.com> wrote:
This may not be what you are looking for but, after you have tried everything, you could try to open it with "Disable all geometry operators on load" checked and/or some other options in the Scene Debugging tab.
If the scene is simple there may be some data you can recover.
M.Yara
On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
I would suggest ensuring that no third party plugins are loaded at
all. It could be you updated a plugin and that plugin is buggy.
-ben
On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com> wrote:
> Can anybody tell me what can I do, if I can't load my scenes saved
> previously and loaded perfectly this before?????? Suddenly Softimage crashes
> on my scenes, and it seems that I lost whole 3 days of job. However, there
> were no crashes, and no issues at all...What the hell is going on????????
> Cheers
> Szabolcs
> ___
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. E-mail transmission cannot be guaranteed to be
> secure or error-free as information could be intercepted, corrupted, lost,
> destroyed, arrive late or incomplete, or contain viruses. The sender
> therefore does not accept liability for any errors or omissions in the
> contents of this message, which arise as a result of e-mail transmission. If
> verification is required please request a hard-copy version. Crytek GmbH -
> http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
> Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer:
> Avni Yerli, Cevat Yerli, Faruk Yerli
--
Best regards,
Ben Houston
Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom
http://Exocortex.com - Passionate CG Software Professionals.
> On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com>wrote:
>> Have a look in the Backup folder within the project there should be 4
>> backups of that scene do those load?
>> On 5 July 2012 13:12, Martin <furik...@gmail.com> wrote:
>>> This may not be what you are looking for but, after you have tried
>>> everything, you could try to open it with "Disable all geometry operators
>>> on load" checked and/or some other options in the Scene Debugging tab.
>>> If the scene is simple there may be some data you can recover.
>>> M.Yara
>>> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
>>>> I would suggest ensuring that no third party plugins are loaded at
>>>> all. It could be you updated a plugin and that plugin is buggy.
>>>> -ben
>>>> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
>>>> wrote:
>>>> > Can anybody tell me what can I do, if I can’t load my scenes saved
>>>> > previously and loaded perfectly this before?????? Suddenly Softimage
>>>> crashes
>>>> > on my scenes, and it seems that I lost whole 3 days of job. However,
>>>> there
>>>> > were no crashes, and no issues at all…What the hell is going
>>>> on????????
>>>> > Cheers
>>>> > Szabolcs
>>>> > ___
>>>> > This message contains confidential information and is intended only
>>>> for the
>>>> > individual named. If you are not the named addressee you should not
>>>> > disseminate, distribute or copy this e-mail. Please notify the sender
>>>> > immediately by e-mail if you have received this e-mail by mistake and
>>>> delete
>>>> > this e-mail from your system. E-mail transmission cannot be
>>>> guaranteed to be
>>>> > secure or error-free as information could be intercepted, corrupted,
>>>> lost,
>>>> > destroyed, arrive late or incomplete, or contain viruses. The sender
>>>> > therefore does not accept liability for any errors or omissions in the
>>>> > contents of this message, which arise as a result of e-mail
>>>> transmission. If
>>>> > verification is required please request a hard-copy version. Crytek
>>>> GmbH -
>>>> > http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt -
>>>> HRB77322
>>>> > Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
>>>> Geschaeftsfuehrer:
>>>> > Avni Yerli, Cevat Yerli, Faruk Yerli
> Try unloading any reference models using the scntoc file. That has
> sometimes helped to narrow down the problem for me.****
> On 5 July 2012 13:19, Simon Anderson <simonbenandersonl...@gmail.com>
> wrote:****
> are you using softimage 2010?****
> ** **
> On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com>
> wrote:****
> Have a look in the Backup folder within the project there should be 4
> backups of that scene do those load?****
> ** **
> On 5 July 2012 13:12, Martin <furik...@gmail.com> wrote:****
> This may not be what you are looking for but, after you have tried
> everything, you could try to open it with "Disable all geometry operators
> on load" checked and/or some other options in the Scene Debugging tab. ***
> *
> ** **
> If the scene is simple there may be some data you can recover.****
> ** **
> M.Yara****
> ** **
> ** **
> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:****
> I would suggest ensuring that no third party plugins are loaded at
> all. It could be you updated a plugin and that plugin is buggy.
> -ben****
> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
> wrote:
> > Can anybody tell me what can I do, if I can’t load my scenes saved
> > previously and loaded perfectly this before?????? Suddenly Softimage
> crashes
> > on my scenes, and it seems that I lost whole 3 days of job. However,
> there
> > were no crashes, and no issues at all…What the hell is going on????????
> > Cheers
> > Szabolcs
> > ___
> > This message contains confidential information and is intended only for
> the
> > individual named. If you are not the named addressee you should not
> > disseminate, distribute or copy this e-mail. Please notify the sender
> > immediately by e-mail if you have received this e-mail by mistake and
> delete
> > this e-mail from your system. E-mail transmission cannot be guaranteed
> to be
> > secure or error-free as information could be intercepted, corrupted,
> lost,
> > destroyed, arrive late or incomplete, or contain viruses. The sender
> > therefore does not accept liability for any errors or omissions in the
> > contents of this message, which arise as a result of e-mail
> transmission. If
> > verification is required please request a hard-copy version. Crytek GmbH
> -
> > http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
> > Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
> Geschaeftsfuehrer:
> > Avni Yerli, Cevat Yerli, Faruk Yerli
You tried this scene on another machine? Not being able to load the previous autosaves sounds dodgy - sounds to me like a runonce or prefs replacement is needed - but quicker to test by loading on another machine.
________________________________
From: softimage-boun...@listproc.autodesk.com [softimage-boun...@listproc.autodesk.com] on behalf of Simon Anderson [simonbenandersonl...@gmail.com]
Sent: 05 July 2012 14:19
To: softim...@listproc.autodesk.com
Subject: Re: WHATTA HELL???????
are you using softimage 2010?
On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com<mailto:pete3dmu...@gmail.com>> wrote:
Have a look in the Backup folder within the project there should be 4 backups of that scene do those load?
On 5 July 2012 13:12, Martin <furik...@gmail.com<mailto:furik...@gmail.com>> wrote:
This may not be what you are looking for but, after you have tried everything, you could try to open it with "Disable all geometry operators on load" checked and/or some other options in the Scene Debugging tab.
If the scene is simple there may be some data you can recover.
M.Yara
On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com<mailto:b...@exocortex.com>> wrote:
I would suggest ensuring that no third party plugins are loaded at
all. It could be you updated a plugin and that plugin is buggy.
-ben
On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com<mailto:szabol...@crytek.com>> wrote:
> Can anybody tell me what can I do, if I can’t load my scenes saved
> previously and loaded perfectly this before?????? Suddenly Softimage crashes
> on my scenes, and it seems that I lost whole 3 days of job. However, there
> were no crashes, and no issues at all…What the hell is going on????????
> Cheers
> Szabolcs
> ___
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. E-mail transmission cannot be guaranteed to be
> secure or error-free as information could be intercepted, corrupted, lost,
> destroyed, arrive late or incomplete, or contain viruses. The sender
> therefore does not accept liability for any errors or omissions in the
> contents of this message, which arise as a result of e-mail transmission. If
> verification is required please request a hard-copy version. Crytek GmbH -
> http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
> Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer:
> Avni Yerli, Cevat Yerli, Faruk Yerli
--
Best regards,
Ben Houston
Voice: 613-762-4113<tel:613-762-4113> Skype: ben.exocortex Twitter: @exocortexcom
http://Exocortex.com - Passionate CG Software Professionals.
> I sacrifice a black rooster, maybe Baron Samedi will help to fix this…
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Peter Agg
> Sent: Thursday, July 05, 2012 2:25 PM
> To: softim...@listproc.autodesk.com
> Subject: Re: WHATTA HELL???????
> Try unloading any reference models using the scntoc file. That has sometimes
> helped to narrow down the problem for me.
> On 5 July 2012 13:19, Simon Anderson <simonbenandersonl...@gmail.com
> <mailto:simonbenandersonl...@gmail.com> > wrote:
> are you using softimage 2010?
> On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com
> <mailto:pete3dmu...@gmail.com> > wrote:
> Have a look in the Backup folder within the project there should be 4 backups
> of that scene do those load?
> On 5 July 2012 13:12, Martin <furik...@gmail.com <mailto:furik...@gmail.com>
> > wrote:
> This may not be what you are looking for but, after you have tried
> everything, you could try to open it with "Disable all geometry operators on
> load" checked and/or some other options in the Scene Debugging tab.
> If the scene is simple there may be some data you can recover.
> M.Yara
> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com
> <mailto:b...@exocortex.com> > wrote:
> I would suggest ensuring that no third party plugins are loaded at
> all. It could be you updated a plugin and that plugin is buggy.
> -ben
> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com
> <mailto:szabol...@crytek.com> > wrote:
> > Can anybody tell me what can I do, if I can’t load my scenes saved
> > previously and loaded perfectly this before?????? Suddenly Softimage
> > crashes
> > on my scenes, and it seems that I lost whole 3 days of job. However, there
> > were no crashes, and no issues at all…What the hell is going on????????
> > Cheers
> > Szabolcs
> > ___
> > This message contains confidential information and is intended only for the
> > individual named. If you are not the named addressee you should not
> > disseminate, distribute or copy this e-mail. Please notify the sender
> > immediately by e-mail if you have received this e-mail by mistake and
> > delete
> > this e-mail from your system. E-mail transmission cannot be guaranteed to
> > be
> > secure or error-free as information could be intercepted, corrupted, lost,
> > destroyed, arrive late or incomplete, or contain viruses. The sender
> > therefore does not accept liability for any errors or omissions in the
> > contents of this message, which arise as a result of e-mail transmission.
> > If
> > verification is required please request a hard-copy version. Crytek GmbH -
> > http://www.crytek.com <http://www.crytek.com> - Grüneburgweg 16-18, 60322
> > Frankfurt - HRB77322
> > Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
> > Geschaeftsfuehrer:
> > Avni Yerli, Cevat Yerli, Faruk Yerli
and tried merging the problematic scene? been here before, its
horrible :/ think there is some debug mode you can switch on in the
SI startup script as well which may help, Fabrice did a while back
when we encountered some errors on previously loadable scenes , think
it was an error on a reference model in the end
On 5 July 2012 13:42, ThomasV <li...@thomasvolkmann.com> wrote:
> Try opening on another system (win <-> linux) if possible. A while ago I
> could open scenes on my linux-box, that were crashing on Win.
> good luck!
> /Thomas
> Szabolcs Matefy <szabol...@crytek.com> hat am 5. Juli 2012 um 14:28
> geschrieben:
> I am on 2013 SP1
> I can’t load the backups, instant crash
> I removed the new plugins, no help
> I tried all you suggested, in vain
> I sacrifice a black rooster, maybe Baron Samedi will help to fix this…
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Peter Agg
> Sent: Thursday, July 05, 2012 2:25 PM
> To: softim...@listproc.autodesk.com
> Subject: Re: WHATTA HELL???????
> Try unloading any reference models using the scntoc file. That has sometimes
> helped to narrow down the problem for me.
> On 5 July 2012 13:19, Simon Anderson <simonbenandersonl...@gmail.com> wrote:
> are you using softimage 2010?
> On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com> wrote:
> Have a look in the Backup folder within the project there should be 4
> backups of that scene do those load?
> On 5 July 2012 13:12, Martin <furik...@gmail.com> wrote:
> This may not be what you are looking for but, after you have tried
> everything, you could try to open it with "Disable all geometry operators on
> load" checked and/or some other options in the Scene Debugging tab.
> If the scene is simple there may be some data you can recover.
> M.Yara
> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
> I would suggest ensuring that no third party plugins are loaded at
> all. It could be you updated a plugin and that plugin is buggy.
> -ben
> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
> wrote:
>> Can anybody tell me what can I do, if I can’t load my scenes saved
>> previously and loaded perfectly this before?????? Suddenly Softimage
>> crashes
>> on my scenes, and it seems that I lost whole 3 days of job. However, there
>> were no crashes, and no issues at all…What the hell is going on????????
>> Cheers
>> Szabolcs
>> ___
>> This message contains confidential information and is intended only for
>> the
>> individual named. If you are not the named addressee you should not
>> disseminate, distribute or copy this e-mail. Please notify the sender
>> immediately by e-mail if you have received this e-mail by mistake and
>> delete
>> this e-mail from your system. E-mail transmission cannot be guaranteed to
>> be
>> secure or error-free as information could be intercepted, corrupted, lost,
>> destroyed, arrive late or incomplete, or contain viruses. The sender
>> therefore does not accept liability for any errors or omissions in the
>> contents of this message, which arise as a result of e-mail transmission.
>> If
>> verification is required please request a hard-copy version. Crytek GmbH -
>> http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
>> Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
>> Geschaeftsfuehrer:
>> Avni Yerli, Cevat Yerli, Faruk Yerli
________________________________
From: softimage-boun...@listproc.autodesk.com [softimage-boun...@listproc.autodesk.com] on behalf of Eric Thivierge [ethivie...@gmail.com]
Sent: 05 July 2012 14:33
To: softim...@listproc.autodesk.com
Subject: Re: WHATTA HELL???????
On Thu, Jul 5, 2012 at 10:28 PM, Szabolcs Matefy <szabol...@crytek.com<mailto:szabol...@crytek.com>> wrote:
I am on 2013 SP1
I can’t load the backups, instant crash
I removed the new plugins, no help
I tried all you suggested, in vain
I sacrifice a black rooster, maybe Baron Samedi will help to fix this…
From: softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com> [mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>] On Behalf Of Peter Agg
Sent: Thursday, July 05, 2012 2:25 PM
To: softim...@listproc.autodesk.com<mailto:softim...@listproc.autodesk.com>
Subject: Re: WHATTA HELL???????
Try unloading any reference models using the scntoc file. That has sometimes helped to narrow down the problem for me.
On 5 July 2012 13:19, Simon Anderson <simonbenandersonl...@gmail.com<mailto:simonbenandersonl...@gmail.com>> wrote:
are you using softimage 2010?
On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com<mailto:pete3dmu...@gmail.com>> wrote:
Have a look in the Backup folder within the project there should be 4 backups of that scene do those load?
On 5 July 2012 13:12, Martin <furik...@gmail.com<mailto:furik...@gmail.com>> wrote:
This may not be what you are looking for but, after you have tried everything, you could try to open it with "Disable all geometry operators on load" checked and/or some other options in the Scene Debugging tab.
If the scene is simple there may be some data you can recover.
M.Yara
On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com<mailto:b...@exocortex.com>> wrote:
I would suggest ensuring that no third party plugins are loaded at
all. It could be you updated a plugin and that plugin is buggy.
-ben
On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com<mailto:szabol...@crytek.com>> wrote:
> Can anybody tell me what can I do, if I can’t load my scenes saved
> previously and loaded perfectly this before?????? Suddenly Softimage crashes
> on my scenes, and it seems that I lost whole 3 days of job. However, there
> were no crashes, and no issues at all…What the hell is going on????????
> Cheers
> Szabolcs
> ___
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. E-mail transmission cannot be guaranteed to be
> secure or error-free as information could be intercepted, corrupted, lost,
> destroyed, arrive late or incomplete, or contain viruses. The sender
> therefore does not accept liability for any errors or omissions in the
> contents of this message, which arise as a result of e-mail transmission. If
> verification is required please request a hard-copy version. Crytek GmbH -
> http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322
> Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer:
> Avni Yerli, Cevat Yerli, Faruk Yerli
--
Best regards,
Ben Houston
Voice: 613-762-4113<tel:613-762-4113> Skype: ben.exocortex Twitter: @exocortexcom
http://Exocortex.com - Passionate CG Software Professionals.
Want to send me the scene? I'll try to open it, although most of what I will do has already been suggested.
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Szabolcs Matefy
Sent: July-05-12 8:03 AM
To: softim...@listproc.autodesk.com
Subject: WHATTA HELL???????
Can anybody tell me what can I do, if I can't load my scenes saved previously and loaded perfectly this before?????? Suddenly Softimage crashes on my scenes, and it seems that I lost whole 3 days of job. However, there were no crashes, and no issues at all...What the hell is going on????????
Cheers
Szabolcs
___
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Crytek GmbH - http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322 Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer: Avni Yerli, Cevat Yerli, Faruk Yerli
Hi,
Can anyone point me in the right direction for finding the full SPDL syntax
somewhere? I could have sworn it was in the docs but I can't find it any more.
Has it been taken out?
I found a bit of reference material on the Softimage Wiki, but it seems
incomplete.
-----Original Message-----
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Andy Nicholas
Sent: July-05-12 9:38 AM
To: softim...@listproc.autodesk.com
Subject: SPDL syntax
Hi,
Can anyone point me in the right direction for finding the full SPDL syntax
somewhere? I could have sworn it was in the docs but I can't find it any more.
Has it been taken out?
I found a bit of reference material on the Softimage Wiki, but it seems
incomplete.
-----Original Message-----
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Stephen Blair
Sent: July-05-12 9:44 AM
To: Andy Nicholas; softim...@listproc.autodesk.com
Subject: RE: SPDL syntax
Yeah, it was under Deprecated Features, if you have the 2011 SDK CHM
-----Original Message-----
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Andy Nicholas
Sent: July-05-12 9:38 AM
To: softim...@listproc.autodesk.com
Subject: SPDL syntax
Hi,
Can anyone point me in the right direction for finding the full SPDL syntax
somewhere? I could have sworn it was in the docs but I can't find it any more.
Has it been taken out?
I found a bit of reference material on the Softimage Wiki, but it seems
incomplete.
Hi Stephen,
Thanks for your help. Sure, I understand it was deprecated. Seeing as XSI still
relies on a lot of stuff that uses SPDLs, surely the reference material should
be kept until the SPDL reliance is removed? Sometimes we need to get under the
hood on some of this stuff.
I'll see if I can find the old chm.
Cheers,
Andy
On 05 July 2012 at 14:44 Stephen Blair <Stephen.Bl...@autodesk.com> wrote:
> Yeah, it was under Deprecated Features, if you have the 2011 SDK CHM
> -----Original Message-----
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Andy Nicholas
> Sent: July-05-12 9:38 AM
> To: softim...@listproc.autodesk.com
> Subject: SPDL syntax
> Hi,
> Can anyone point me in the right direction for finding the full SPDL syntax
> somewhere? I could have sworn it was in the docs but I can't find it any more.
> Has it been taken out?
> I found a bit of reference material on the Softimage Wiki, but it seems
> incomplete.
> -----Original Message-----
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Stephen Blair
> Sent: July-05-12 9:44 AM
> To: Andy Nicholas; softim...@listproc.autodesk.com
> Subject: RE: SPDL syntax
> Yeah, it was under Deprecated Features, if you have the 2011 SDK CHM
> -----Original Message-----
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Andy Nicholas
> Sent: July-05-12 9:38 AM
> To: softim...@listproc.autodesk.com
> Subject: SPDL syntax
> Hi,
> Can anyone point me in the right direction for finding the full SPDL syntax
> somewhere? I could have sworn it was in the docs but I can't find it any more.
> Has it been taken out?
> I found a bit of reference material on the Softimage Wiki, but it seems
> incomplete.
This might be a long shot but try opening your scene's .scntoc file in a
text editor. You may be able to find something in there that you can alter
or get rid of to help open your scene.
One case in which this worked for me was when I had about 30+
multi-resolution reference models in one scene and I accidentally saved and
closed the scene while all the models were set to their highest res.
Opening the scntoc file allowed me to set the model res all back to their
lowest resolution and after that I was able to open the scene.
On Thu, Jul 5, 2012 at 9:56 AM, Octavian Ureche <okt...@gmail.com> wrote:
> So why would anyone care about xsi having ascii scene file description?
> Well....this is why.
> I feel your pain, though trying to recover a scene in this situation, has
> more to do with luck than anything else.
On Thu, Jul 5, 2012 at 11:00 AM, Chris Covelli <kylevar...@gmail.com> wrote:
> This might be a long shot but try opening your scene's .scntoc file in a
> text editor. You may be able to find something in there that you can alter
> or get rid of to help open your scene.
> One case in which this worked for me was when I had about 30+
> multi-resolution reference models in one scene and I accidentally saved and
> closed the scene while all the models were set to their highest res.
> Opening the scntoc file allowed me to set the model res all back to their
> lowest resolution and after that I was able to open the scene.
> On Thu, Jul 5, 2012 at 9:56 AM, Octavian Ureche <okt...@gmail.com> wrote:
>> So why would anyone care about xsi having ascii scene file description?
>> Well....this is why.
>> I feel your pain, though trying to recover a scene in this situation, has
>> more to do with luck than anything else.
I managed to find an older crashsave, and I recovered the scene from it. I had Species rig in the scene, but it was working just fine, yet it removed it. I also had installed Move Normal prior to the disaster, so I removed it also. The scene was not opening any on our computers.
I tend to believe what our artists say, SI 2013 line is cursed...they returned to 2012 SAP, and I am the sole 2013 user...
-----Original Message-----
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Rob Chapman
Sent: Thursday, July 05, 2012 2:47 PM
To: ThomasV; softim...@listproc.autodesk.com
Subject: Re: WHATTA HELL???????
and tried merging the problematic scene? been here before, its
horrible :/ think there is some debug mode you can switch on in the
SI startup script as well which may help, Fabrice did a while back when we encountered some errors on previously loadable scenes , think it was an error on a reference model in the end
On 5 July 2012 13:42, ThomasV <li...@thomasvolkmann.com> wrote:
> Try opening on another system (win <-> linux) if possible. A while ago > I could open scenes on my linux-box, that were crashing on Win.
> good luck!
> /Thomas
> Szabolcs Matefy <szabol...@crytek.com> hat am 5. Juli 2012 um 14:28
> geschrieben:
> I am on 2013 SP1
> I can’t load the backups, instant crash
> I removed the new plugins, no help
> I tried all you suggested, in vain
> I sacrifice a black rooster, maybe Baron Samedi will help to fix this…
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Peter > Agg
> Sent: Thursday, July 05, 2012 2:25 PM
> To: softim...@listproc.autodesk.com
> Subject: Re: WHATTA HELL???????
> Try unloading any reference models using the scntoc file. That has > sometimes helped to narrow down the problem for me.
> On 5 July 2012 13:19, Simon Anderson <simonbenandersonl...@gmail.com> wrote:
> are you using softimage 2010?
> On Thu, Jul 5, 2012 at 10:17 PM, Pete Edmunds <pete3dmu...@gmail.com> wrote:
> Have a look in the Backup folder within the project there should be 4 > backups of that scene do those load?
> On 5 July 2012 13:12, Martin <furik...@gmail.com> wrote:
> This may not be what you are looking for but, after you have tried > everything, you could try to open it with "Disable all geometry > operators on load" checked and/or some other options in the Scene Debugging tab.
> If the scene is simple there may be some data you can recover.
> M.Yara
> On Thu, Jul 5, 2012 at 9:06 PM, Ben Houston <b...@exocortex.com> wrote:
> I would suggest ensuring that no third party plugins are loaded at > all. It could be you updated a plugin and that plugin is buggy.
> -ben
> On Thu, Jul 5, 2012 at 8:02 AM, Szabolcs Matefy <szabol...@crytek.com>
> wrote:
>> Can anybody tell me what can I do, if I can’t load my scenes saved >> previously and loaded perfectly this before?????? Suddenly Softimage >> crashes on my scenes, and it seems that I lost whole 3 days of job. >> However, there were no crashes, and no issues at all…What the hell is >> going on????????
>> Cheers
>> Szabolcs
>> ___
>> This message contains confidential information and is intended only >> for the individual named. If you are not the named addressee you >> should not disseminate, distribute or copy this e-mail. Please notify >> the sender immediately by e-mail if you have received this e-mail by >> mistake and delete this e-mail from your system. E-mail transmission >> cannot be guaranteed to be secure or error-free as information could >> be intercepted, corrupted, lost, destroyed, arrive late or >> incomplete, or contain viruses. The sender therefore does not accept >> liability for any errors or omissions in the contents of this >> message, which arise as a result of e-mail transmission.
>> If
>> verification is required please request a hard-copy version. Crytek >> GmbH - http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - >> HRB77322 Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 -
>> Geschaeftsfuehrer:
>> Avni Yerli, Cevat Yerli, Faruk Yerli
