solution for "terminated code:-1" problem
The group you are posting to is a
Usenet group . Messages posted to this group will make your email address visible to anyone on the Internet.
Your reply message has not been sent.
Your post was successful
From:
다짜 <elegan... @gmail.com> Date: Mon, 15 Jun 2009 19:01:56 -0700 (PDT)
Local: Mon, Jun 15 2009 10:01 pm
Subject: solution for "terminated code:-1" problem
I couldn't find the solution here
and I really luckily found it so I post it here
so you can locate these options in xmind.ini file,
-vmargs
change the position of -XX:MaxPermSize into the upper line, so simple
-XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
From:
stephen zhu <stephen0928.... @gmail.com> Date: Sat, 20 Jun 2009 11:25:31 +0800
Local: Fri, Jun 19 2009 11:25 pm
Subject: Re: [xmind:1473] solution for "terminated code:-1" problem
Sincerely!
Stephen
On Tue, Jun 16, 2009 at 10:01 AM, 다짜 <elegan
... @gmail.com> wrote:
> I couldn't find the solution here
> -vmargs
> change the position of -XX:MaxPermSize into the upper line, so simple
> -XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
From:
betterpol <better... @gmail.com> Date: Tue, 23 Jun 2009 19:57:16 -0700 (PDT)
Local: Tues, Jun 23 2009 10:57 pm
Subject: Re: solution for "terminated code:-1" problem
thank you it's works ok. :)
On 19 jun, 22:25, stephen zhu <stephen0928.... @gmail.com> wrote:
> thanks for you. :)
> Sincerely!
> Stephen
> On Tue, Jun 16, 2009 at 10:01 AM, 다짜 <elegan... @gmail.com> wrote:
> > I couldn't find the solution here
> > -vmargs
> > change the position of -XX:MaxPermSize into the upper line, so simple
> > -XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
From:
Chen Xu <tacy... @gmail.com> Date: Sun, 28 Jun 2009 15:34:21 +0800
Local: Sun, Jun 28 2009 3:34 am
Subject: Re: [xmind:1473] solution for "terminated code:-1" problem
2009/6/16 다짜 <elegan... @gmail.com>
> I couldn't find the solution here
> -vmargs
> change the position of -XX:MaxPermSize into the upper line, so simple
> -XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
From:
heuynish <heuyn... @gmail.com> Date: Mon, 13 Jul 2009 03:13:13 -0700 (PDT)
Local: Mon, Jul 13 2009 6:13 am
Subject: Re: solution for "terminated code:-1" problem
I cannot find xmind.ini in my local drive (windows xp)
Is xmind.ini for Mac only?
On Jun 28, 3:34 pm, Chen Xu <tacy... @gmail.com> wrote:
> 감사해요~
> 2009/6/16 다짜 <elegan... @gmail.com>
> > I couldn't find the solution here
> > -vmargs
> > change the position of -XX:MaxPermSize into the upper line, so simple
> > -XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
From:
stephen zhu <stephen0928.... @gmail.com> Date: Wed, 15 Jul 2009 10:21:54 +0800
Local: Tues, Jul 14 2009 10:21 pm
Subject: Re: [xmind:1544] Re: solution for "terminated code:-1" problem
Sincerely!
Stephen
2009/7/13 heuynish <heuyn... @gmail.com>
> I cannot find xmind.ini in my local drive (windows xp)
> On Jun 28, 3:34 pm, Chen Xu <tacy... @gmail.com> wrote:
> > 2009/6/16 다짜 <elegan... @gmail.com>
> > > I couldn't find the solution here
> > > -vmargs
> > > change the position of -XX:MaxPermSize into the upper line, so simple
> > > -XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
From:
heuynish <heuyn... @gmail.com> Date: Fri, 17 Jul 2009 00:29:30 -0700 (PDT)
Local: Fri, Jul 17 2009 3:29 am
Subject: Re: solution for "terminated code:-1" problem
Thanks Stephen, the issue is resolved~
On Jul 15, 10:21 am, stephen zhu <stephen0928.... @gmail.com> wrote:
> of course, no. it should be in your XMind installation folder. normally it's
> at C driver.
> Sincerely!
> Stephen
> 2009/7/13 heuynish <heuyn... @gmail.com>
> > I cannot find xmind.ini in my local drive (windows xp)
> > On Jun 28, 3:34 pm, Chen Xu <tacy... @gmail.com> wrote:
> > > 2009/6/16 다짜 <elegan... @gmail.com>
> > > > I couldn't find the solution here
> > > > -vmargs
> > > > change the position of -XX:MaxPermSize into the upper line, so simple
> > > > -XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
From:
stevesloa... @gmail.com Date: Tue, 10 Apr 2012 15:35:53 -0700 (PDT)
Local: Tues, Apr 10 2012 6:35 pm
Subject: Re: solution for "terminated code:-1" problem
On Monday, June 15, 2009 9:01:56 PM UTC-5, 다짜 wrote:
> I couldn't find the solution here
> -vmargs
> change the position of -XX:MaxPermSize into the upper line, so simple
> -XX:MaxPermSize=256m ==> to this line
You must
Sign in before you can post messages.
You do not have the permission required to post.
