XBEE RF transmission rate

[JuanS]

Hi everybody!

Well I have to tell you, finally, I found out how to make what I need, but for being sure of that (when I get my results I will let you know) I need to know if there is a way to configure the XBee's RF transmission rate, I mean, I need to test the maximum RF rate: 250 kbps and manage/change it if needed.In my XCTU software appears just until 230 kbps, well it doesn't matter, just need to use the maximum.

Thanks in advance!!

Regards,

JuanS

[JuanS]

2011/8/23 JuanS <nau...@gmail.com>

--
¡LO QUE DICES.....RECIBES!

[JuanS]

I forgot something: I know one is the interface rate (bauds) and the rf transmission rate. In the first one, I can't configure the 230.700 rate because the ATBD command just let me modify until 115200, but it's needed to use or test the maximum (230).

The second rate, the RF, I don't know nothing on how to change it. I know this is the one taht let me transmit until 250kbps. So my request, please is to know how to manage the both rates.

thanks!!

JuanS

2011/8/23 JuanS <nau...@gmail.com>

--
¡LO QUE DICES.....RECIBES!