Another newbie - my experiences

61 views
Skip to first unread message

RobinEd

unread,
Apr 29, 2013, 3:15:03 PM4/29/13
to wv...@googlegroups.com
I've had a weather station for a few years, managed by MrHouse until recently when I upgraded my server and my weather station co-incidentally failed.  So, fresh approach, all new.

My new setup:  Excito B3 server,  Scientific Oregon WMR88 and wview.

First, thank you all, whoever has contributed for a great piece of software, it dropped in and started working like a treat, apart from my errors and some dubiousness around SO wireless comms, neither can be blamed on wview.

I, needless to say, have some questions.

1: I had a power fail and it was a devil of a job to get wview working again.  First I didnt spot it had not autorestarted, then I could not get it to start from a command line, after deleting pid files and killing tasks finally got it going.  I did try the force-reload option at one point but that did not have a positive effect.  I cant find anything about this in the manual.  Where did I go wrong?  Is there something I can set up so that on restart of server (after a power fail) it will start OK?

2: I mistakenly left my test data (first day) in wview.  That was 14th April and there does not appear to be a day archive for that (if that's the right term).  When I look for it from the web interface no file found.  Can somebody recommend best approach, I'm keen to keep as much as possible but during the first day a member of my family turned the rain guage over and now I have an 11,000mm rainfall as my high rainfall!

3: The install process I used was as documented in the quick start, once I'd defined the repositories I issued an 'apt-get install wview'.  Lots of packages were installed, everything seems good with the exception of the online management. If I try to use it by pointing my web browser at http://192.168.1.4/wviewmgmt/system_status.php I get SqliteDBOpen /etc/wview/wview-conf.sdb failed: could not find driver .    I did find a reference to this on the forums but I'm not sure I followed how to correct it.

Other than these three problems (of which I'm sure at least two are user error) everything is going great guns.  Thank you. robin
Reply all
Reply to author
Forward
0 new messages