Does anyone have the steps for reloading the uMon on the Cog from the steps in the wiki that once was

To be able to finish a robotics project with multiple VC21 boards we are looking for 1 or 2 VC21

First I would like to say thanks to Tarun for the support that I received in trying to develop my

Sun has an open source project called PhoneME (micro edition) started for the mobile phone market.

I am trying, but do not get run Java applications. It is a very interesting work if you can share

Hello, I've been trying to get the eMMA to work with the Camera Cog and VC21. First of all I am

Nonworking Sandisk miniSD card? The Sandisk microSD cards with miniSD adapter kits (http:// www.

Hi, How can I know my HAB Toolkit working properly? I've used the command "tfs -feb cp [

I am trying to compile the trivial hello work program if I use arm-linux-gcc (arm-linux-gcc hello,c -

I am interested in building a FPGA daughter I want the board to be able to control the stack without

Hello Mr Tarun, The LED never go off when I load ramtst.bin and boot.bin. I don't really know

I remember hearing a while back that there was supposed to be a release of a Buildroot-based build

To write such a driver, you would need support from the IP vendor and in all honesty, you wouldn'

Hello, How do I reset this board as it is a new one?

Thanks for the quick reply Dan. I did try a qclean and clean on tfs. No joy with either. I've

Peter, The LEDs should come on briefly and then turn off - this indicates that the bootloader is

Is anyone using Code::Blocks w/ the GNU ARM compiler to build applications? Also on another note does

Thanks for your fast response Dan. To answer my own question, I want to have the camera clock at ~

At 02:45 27-05-2008, you wrote: >Hi Joost > > > The following command line is the one

Ok, problem is solved. I modified tsc2100 sources, and figured out that it requires minor number 64

Joost 't Hart wrote: > Dan, thanks for your promptness! > > At 02:57 25-05-2008, you

Hi Pete. Whatever is in CVS for .22 is the current state of the forward port. It works, but is

James, Some of this was answered in my response to your previous question. More info on linker

James, uMon performs no memory management at all. If your program never returns to uMon, you can use

Thanks for the update Peter - I'll add your instructions to the wiki. PeterW wrote: > Well I

James, Yes, you can access the uart as /dev/ttyS0. Assuming you don't need to share the I2C

Chris, If you did everything in assembly, you should be able to get the performance you need in terms

I believe I did.. atleast I remember reading to do that, however after recompiling and reuploading it

Hi Tarun - that is already a nice and cheap solution ! We are looking forward with great expectations

Ok partial success. After working on and off with this project. I think I'm close. The telnetd