> So, the challenge is that I am an idiot. I deleted the page without copying the data. Here is a screenshot from the wayback web machine for reference.
> Aaron
> <Lowrider parts.png>
> <Screen Shot 2012-11-04 at 1.59.23 PM.png>
> On Nov 4, 2012, at 12:57 PM, Owen M Collins wrote:
>> Hey Aaron,
>> I am trying to track down the assembly info(as well as a list if non printed parts) for the 8mm rod xy low rider for early cupcakes.
>> Any help would be appreciated. >> O
>> Sent from my mobile
>> (Please excuse my brevity and typos)
> So, the challenge is that I am an idiot. I deleted the page without copying the data. Here is a screenshot from the wayback web machine for reference.
> Aaron
> <Lowrider parts.png>
> <Screen Shot 2012-11-04 at 1.59.23 PM.png>
> On Nov 4, 2012, at 12:57 PM, Owen M Collins wrote:
>> Hey Aaron,
>> I am trying to track down the assembly info(as well as a list if non printed parts) for the 8mm rod xy low rider for early cupcakes.
>> Any help would be appreciated. >> O
>> Sent from my mobile
>> (Please excuse my brevity and typos)
>> So, the challenge is that I am an idiot. I deleted the page without copying the data. Here is a screenshot from the wayback web machine for reference.
>> Aaron
>> <Lowrider parts.png>
>> <Screen Shot 2012-11-04 at 1.59.23 PM.png>
>> On Nov 4, 2012, at 12:57 PM, Owen M Collins wrote:
>>> Hey Aaron,
>>> I am trying to track down the assembly info(as well as a list if non printed parts) for the 8mm rod xy low rider for early cupcakes.
>>> Any help would be appreciated. >>> O
>>> Sent from my mobile
>>> (Please excuse my brevity and typos)
Do people have a preferred vendor for the socket cap bolts? I have just cobbled stuff with the extras from my Makerbot kit. This will be my first time to shop for a vendor.
Thx
Owen
On Nov 5, 2012, at 11:10 AM, Dan Laskowski wrote:
I use them as well for my personal projects, but it's not generally an option for non-US folks because they're picky about shipping address export restrictions and pre-existing business relationships.
Andrew.
On 2012-11-05, at 1:34 PM, Owen M Collins wrote:
> Do people have a preferred vendor for the socket cap bolts? I have just cobbled stuff with the extras from my Makerbot kit. This will be my first time to shop for a vendor.
> Thx
> Owen
> On Nov 5, 2012, at 11:10 AM, Dan Laskowski wrote:
>> Installing the lowrider for xy is well worth the effort. I have two installed and love them!
>> --
> --
--
"The future is already here. It's just not very evenly distributed" -- William Gibson
On Mon, Nov 5, 2012 at 1:44 PM, Andrew Plumb <and...@plumb.org> wrote:
> Folks in the US usually default to McMaster-Carr when there's nobody local
> carrying the metric hardware:
> I use them as well for my personal projects, but it's not generally an
> option for non-US folks because they're picky about shipping address export
> restrictions and pre-existing business relationships.
> Andrew.
> On 2012-11-05, at 1:34 PM, Owen M Collins wrote:
> Do people have a preferred vendor for the socket cap bolts? I have just
> cobbled stuff with the extras from my Makerbot kit. This will be my first
> time to shop for a vendor.
> Thx
> Owen
> On Nov 5, 2012, at 11:10 AM, Dan Laskowski wrote:
> Installing the lowrider for xy is well worth the effort. I have two
> installed and love them!
> --
> --
> --
> "The future is already here. It's just not very evenly distributed" --
> William Gibson
> Even if there is a local source McMaster is much cheaper.
> Unless you just need 1 of course.
> Fastenal just down the street from me sells a box of 100 M3 22's for $29
> McMaster is about $4.77 last time I bought a box.
> b
> On Mon, Nov 5, 2012 at 1:44 PM, Andrew Plumb <and...@plumb.org> wrote:
> Folks in the US usually default to McMaster-Carr when there's nobody local carrying the metric hardware:
> I use them as well for my personal projects, but it's not generally an option for non-US folks because they're picky about shipping address export restrictions and pre-existing business relationships.
> Andrew.
> On 2012-11-05, at 1:34 PM, Owen M Collins wrote:
>> Do people have a preferred vendor for the socket cap bolts? I have just cobbled stuff with the extras from my Makerbot kit. This will be my first time to shop for a vendor.
>> Thx
>> Owen
>> On Nov 5, 2012, at 11:10 AM, Dan Laskowski wrote:
>>> Installing the lowrider for xy is well worth the effort. I have two installed and love them!
>>> --
>> --
> --
> "The future is already here. It's just not very evenly distributed" -- William Gibson
