MP calls
Pascal Laurent
Let's say I have MP1 ending with ip 136 and MP2 with ip 137. I turned off MP1. From MP2 I dialed 136, I would expect to get a busy tone instead the phone ring, ring, ring and ring forever. Would you please educate me the possible cause of this behavior? How could I fix this problem?
Now I powered MP1 and I could connect to it from another PC via ssh. From MP2 I dialed 136. MP1 never received the call until I issued a "sip reload". Has anyone experiencing a similar behavior?
Enjoy,
--P
David Rowe
> Let's say I have MP1 ending with ip 136 and MP2 with ip 137. I turned
> off MP1. From MP2 I dialed 136, I would expect to get a busy tone
> instead the phone ring, ring, ring and ring forever. Would you please
> educate me the possible cause of this behavior? How could I fix this
> problem?
Get David to fix chan_mp :-) It's a (logged) bug in the channel driver,
it should wait for some sort of connection before playing ring back
tone. There are a few little issues we need to fix, and a bunch of new
work we would like to do.
Once I get a chance to set some priorities with Steve and Elektra I hope
to set about fixing some of these bugs.
Anyone else is also very welcome to work on the bugs.
- David
Michael Adeyeye
Do we have a bug tracker, such as the bugzilla and the trac?
I would like to see a list of known bugs and issues. I ran a couple of tests last weekend and was able to identify some problems/bugs.
Like Pascal mentioned, one MP kept generating a 180 ringing instead of 100 trying, despite that it was out of range (i.e. could not contact the other MP). There was also a high pitch noise on one of the MPs, when I picked up its receiver.
The MP range seems short that I could not get two MPs in less than 100m apart connect to each other. I am thinking that I might need to position their antennas on the roof of each building.
I remember that Elektra and I did some range tests during the second workshop.
A list of known bugs and a bug tracker to file a bug would expedite the fixing of these bugs.
Regards,
Michael.
--
You received this message because you are subscribed to the Google Groups "village-telco-dev" group.
To post to this group, send email to village-...@googlegroups.com.
To unsubscribe from this group, send email to village-telco-...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/village-telco-dev?hl=en.
Steve Song
The bug tracker is on sourceforge.net at
http://sourceforge.net/tracker/?group_id=221252&atid=1051934
Cheers... Steve
--
Steve Song
Telecommunications Fellow, Shuttleworth Foundation
email: steve...@shuttleworthfoundation.org
work: +27 21 970 1220
mobile: +27 83 482 2088
skype: steve_l_song
blog: http://manypossibilities.net
twitter: stevesong