MRTG Help needed

[paresh bhide]

Hi

configure MRTG in CentOS release 5.2 (Final) using this link (http://www.cyberciti.biz/faq/centos-fedora-linux-multi-router-traffic-grapher-tutorial/comment-page-1/#comment-72541).

show index page but it is not showing any graph.

MRTG Index Page

version 2.14.5

Tobias Oetiker <to...@oetiker.ch> and Dave Rand <d...@bungi.com>

Paresh Bhide

[Tejas Barot]

Hello,

Try Following link and confimed steps :- 

http://linuxforums.tejasbarot.com/linux-howto-s-tips-tricks/mrtg-grapher-how-to-t22.html

Hope this helps you.

--
--
Please read http://www.catb.org/~esr/faqs/smart-questions.html before posting.
You received this message because you are subscribed to the "Vibrant GNU/Linux User Group".
To stop receiving emails from this group, mail to VGLUG+un...@googlegroups.com
To post to this group, send email to VG...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/VGLUG
 
 
 

--
Thanks & Regards,
Tejas Barot
Linux Administrator,
Red Hat Certified Engineer,
Linux Blog:- http://www.tejasbarot.com
Linux Forums :- http://linuxforums.tejasbarot.com
Open Source :- http://opensource.tejasbarot.com

"WindowZzz and Micro$oft is Like a Bird which always Flies with its Restriction,
Be a High Flying Linux Bird to Enjoy the Huge Sky with Full of Freedom,
Use Linux and Open Source" - Tejas Barot

Mobile Apps for All Linux User's Blog :- 
Android, BlackBerry and iPhone :- http://www.tejasbarot.com/download-mobile-apps/

Like My quote ? To Read and Submit More Linux Quotes :- http://linux-quotes.tejasbarot.com

Registered Linux User :- https://linuxcounter.net/user/507586.html

[paresh bhide]

Hi Tejas

Thanks for link.

on server mrtg is install but when i try to run the below command it gave me error.

[root@MRTG ~]# cfgmaker -global 'WorkDir: /var/www/html/mrtg' pub...@192.168.2.1 > mrtg.cfg
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.2.1" [192.168.2.1].161)
                  community: "public"
                 request ID: 1133702889
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib64/mrtg2/SNMP_util.pm line 627
SNMPWALK Problem for 1.3.6.1.2.1.1 on pub...@192.168.2.1::::::v4only
 at /usr/bin/cfgmaker line 918
WARNING: Skipping pub...@192.168.2.1: as no info could be retrieved


(192.168.2.1 is my network devices.)snmp is also enabled on network device.


Paresh Bhide

[Tejas Barot]

Hello,


If its enabled then check firewall rules.

As peR your output it clearly says that heRe is an issue with SNMP response.

Hope this will helps you.

--
Thanks & Regards,
Tejas Barot
Linux Administrator,
Red Hat Certified Engineer,
Linux Blog:- http://www.tejasbarot.com
Linux Forums :- http://linuxforums.tejasbarot.com
Open Source :- http://opensource.tejasbarot.com

"WindowZzz and Micro$oft is Like a Bird which always Flies with its Restriction,
Be a High Flying Linux Bird to Enjoy the Huge Sky with Full of Freedom,
Use Linux and Open Source" - Tejas Barot

Mobile Apps for All Linux User's Blog :-
Android, BlackBerry and iPhone :- http://www.tejasbarot.com/download-mobile-apps/

Like My quote ? To Read and Submit More Linux Quotes :- http://linux-quotes.tejasbarot.com

Registered Linux User :- https://linuxcounter.net/user/507586.html

Sent on my BlackBerry® from Vodafone

---

From: paresh bhide <pares...@gmail.com>

Sender: vg...@googlegroups.com

Date: Sat, 27 Oct 2012 18:42:49 +0530

To: <vg...@googlegroups.com>

ReplyTo: vg...@googlegroups.com

Subject: Re: [VGLUG] MRTG Help needed

[Vishal Joshi]

Hi Paresh,

On Sat, Oct 27, 2012 at 6:42 PM, paresh bhide <pares...@gmail.com> wrote:

Hi Tejas

Thanks for link.

on server mrtg is install but when i try to run the below command it gave me error.

[root@MRTG ~]# cfgmaker -global 'WorkDir: /var/www/html/mrtg' pub...@192.168.2.1 > mrtg.cfg
SNMP Error:
no response received

Make sure that you have the same community name (public) set on that particular device. Can you share the output of the following command from your network device?

# sh snmp community


 

Best regards,
Vishal Girish Joshi
M: +91-9768797123

Please consider the Environment before printing this e-mail

[paresh bhide]

Hi

as per doc both side i set same community name (public).

Paresh Bhide