Dear all,
I have two identical sun ultra2 system, same configuration (cpu, memory,
os...). Each machine has two hard disks and was setup using mirror with
main c0t0 and mirror c1t0 (two SCSI controllers, the one from
motherboard in c0 and the external one is c1), I swapped the hard disks
between the two machines, after boot, format cmd only show disk with c0,
did boot -r, then the second disk show up as c2, why is the controller
id changed?
--
James Zhao
Tech Systems
w-Technologies, Inc.
50 Broadway, 2nd Floor
New York, NY 10038
Phone: (212) 324-8259
Fax: (212) 324-8269
James.Z...@w-Technologies.com
http://www.w-Technologies.com
"The Power Behind Mobile Business"
_______________________________________________
sunmanagers mailing list
sunmanag...@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers