PHP testbed problem I had was transitory

2 views
Skip to first unread message

Timothy Lethbridge

unread,
Mar 26, 2012, 12:14:29 PM3/26/12
to Umple Development Discussions
Hi,

The problem I had with the PHP testbed has vanished with the latest
updates and build, so ignore yesterday's email.


Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
Professor of Software Engineering and Computer Science
/ Professeur Titulaire de gï¿œnie logiciel et d'informatique
Facultￜ de genie / Faculty of Engineering
University of Ottawa / Universitￜ d'Ottawa
Tel: 613-562-5800x6685 Fax: 613-562-5664 Mobile: 613-252-1850
http://www.eecs.uottawa.ca/~tcl

Sonya

unread,
Mar 26, 2012, 10:40:10 PM3/26/12
to umpl...@googlegroups.com
Ok. That said, I wanted to advise that the matter of r1618 and the
un-added .rb files and "broken" file-references in the ruby testbed
should be dealt with or raised as an issue, since it could mask future
problems with the ruby implementation if bugs are accidentally
introduced into the ruby implementation for associations. (I discuss
this matter in my earlier email.) I can just take personal
responsibility for that cleanup if someone wishes me to. I would simply
add and delete the necessary files in svn, and modify the referenced
file names in all affected testbed tests.
- Sonya


On 3/26/2012 10:14 AM, Timothy Lethbridge wrote:
> Hi,
>
> The problem I had with the PHP testbed has vanished with the latest
> updates and build, so ignore yesterday's email.
>
>
> Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
> Professor of Software Engineering and Computer Science

> / Professeur Titulaire de g�nie logiciel et d'informatique
> Facult� de genie / Faculty of Engineering
> University of Ottawa / Universit� d'Ottawa

adzi...@uwaterloo.ca

unread,
Mar 26, 2012, 11:55:36 PM3/26/12
to umpl...@googlegroups.com
Thanks Sonya, but considering that this problem was caused by my
patch, I think it's only fair if I fix it.

-Adam

Quoting Sonya <sia...@mail.usask.ca>:

> Ok. That said, I wanted to advise that the matter of r1618 and the
> un-added .rb files and "broken" file-references in the ruby testbed
> should be dealt with or raised as an issue, since it could mask
> future problems with the ruby implementation if bugs are
> accidentally introduced into the ruby implementation for
> associations. (I discuss this matter in my earlier email.) I can
> just take personal responsibility for that cleanup if someone wishes
> me to. I would simply add and delete the necessary files in svn, and
> modify the referenced file names in all affected testbed tests.
> - Sonya
>
>
> On 3/26/2012 10:14 AM, Timothy Lethbridge wrote:
>> Hi,
>>
>> The problem I had with the PHP testbed has vanished with the latest
>> updates and build, so ignore yesterday's email.
>>
>>
>> Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
>> Professor of Software Engineering and Computer Science

>> / Professeur Titulaire de génie logiciel et d'informatique
>> Faculté de genie / Faculty of Engineering
>> University of Ottawa / Université d'Ottawa


>> Tel: 613-562-5800x6685 Fax: 613-562-5664 Mobile: 613-252-1850
>> http://www.eecs.uottawa.ca/~tcl
>>
>

> --
> You received this message because you are subscribed to the Google
> Groups "Umple-Dev" group.
> To post to this group, send an email to umpl...@googlegroups.com.
> To unsubscribe from this group, send email to
> umple-dev+...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>
>
>


Sonya

unread,
Mar 27, 2012, 12:08:06 AM3/27/12
to umpl...@googlegroups.com
Of course, Adam. I didn't want to overstep my bounds, I just wanted to
make sure the matter didn't fall under the radar. (I felt responsible
for it since I was the one who identified the nature of the problem but
I hadn't heard any response about it yet.)
Thanks!
Sonya

On 3/26/2012 9:55 PM, adzi...@uwaterloo.ca wrote:
> Thanks Sonya, but considering that this problem was caused by my
> patch, I think it's only fair if I fix it.
>
> -Adam
>
> Quoting Sonya <sia...@mail.usask.ca>:
>
>> Ok. That said, I wanted to advise that the matter of r1618 and the
>> un-added .rb files and "broken" file-references in the ruby testbed
>> should be dealt with or raised as an issue, since it could mask
>> future problems with the ruby implementation if bugs are accidentally
>> introduced into the ruby implementation for associations. (I discuss
>> this matter in my earlier email.) I can just take personal
>> responsibility for that cleanup if someone wishes me to. I would
>> simply add and delete the necessary files in svn, and modify the
>> referenced file names in all affected testbed tests.
>> - Sonya
>>
>>
>> On 3/26/2012 10:14 AM, Timothy Lethbridge wrote:
>>> Hi,
>>>
>>> The problem I had with the PHP testbed has vanished with the latest
>>> updates and build, so ignore yesterday's email.
>>>
>>>
>>> Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
>>> Professor of Software Engineering and Computer Science

>>> / Professeur Titulaire de g�nie logiciel et d'informatique

>>> Facult� de genie / Faculty of Engineering
>>> University of Ottawa / Universit� d'Ottawa

Timothy Lethbridge

unread,
Mar 27, 2012, 10:55:47 AM3/27/12
to umpl...@googlegroups.com
Hi,

Thanks to the two of you. If you can co-operate to resolve this, it would
be helpful.

- Tim

On Mon, 26 Mar 2012, adzi...@uwaterloo.ca wrote:

> Thanks Sonya, but considering that this problem was caused by my patch, I
> think it's only fair if I fix it.
>
> -Adam
>
> Quoting Sonya <sia...@mail.usask.ca>:
>
>> Ok. That said, I wanted to advise that the matter of r1618 and the un-added
>> .rb files and "broken" file-references in the ruby testbed should be dealt
>> with or raised as an issue, since it could mask future problems with the
>> ruby implementation if bugs are accidentally introduced into the ruby
>> implementation for associations. (I discuss this matter in my earlier
>> email.) I can just take personal responsibility for that cleanup if someone
>> wishes me to. I would simply add and delete the necessary files in svn, and
>> modify the referenced file names in all affected testbed tests.
>> - Sonya
>>
>>
>> On 3/26/2012 10:14 AM, Timothy Lethbridge wrote:
>>> Hi,
>>>
>>> The problem I had with the PHP testbed has vanished with the latest
>>> updates and build, so ignore yesterday's email.
>>>
>>>
>>> Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
>>> Professor of Software Engineering and Computer Science

>>> / Professeur Titulaire de g�nie logiciel et d'informatique

>>> Facult� de genie / Faculty of Engineering
>>> University of Ottawa / Universit� d'Ottawa


>>> Tel: 613-562-5800x6685 Fax: 613-562-5664 Mobile: 613-252-1850
>>> http://www.eecs.uottawa.ca/~tcl
>>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Umple-Dev" group.
>> To post to this group, send an email to umpl...@googlegroups.com.
>> To unsubscribe from this group, send email to
>> umple-dev+...@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/umple-dev?hl=en-GB.
>>
>>
>>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Umple-Dev" group.
> To post to this group, send an email to umpl...@googlegroups.com.
> To unsubscribe from this group, send email to
> umple-dev+...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>

Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
Professor of Software Engineering and Computer Science

/ Professeur Titulaire de g�nie logiciel et d'informatique

Facult� de genie / Faculty of Engineering
University of Ottawa / Universit� d'Ottawa

adzi...@uwaterloo.ca

unread,
Mar 27, 2012, 7:47:09 PM3/27/12
to umpl...@googlegroups.com
Hi all.
I just comitted a fix for the Ruby testbed issue found by Sonya. The
Ruby Testbed now compiles and runs without error. (build.testbed.xml
-> compileRuby & testRuby)

Thanks for finding & reporting this all.

-Adam

Quoting Timothy Lethbridge <t...@eecs.uottawa.ca>:

>>>> / Professeur Titulaire de génie logiciel et d'informatique

>>>> Faculté de genie / Faculty of Engineering
>>>> University of Ottawa / Université d'Ottawa


>>>> Tel: 613-562-5800x6685 Fax: 613-562-5664 Mobile: 613-252-1850
>>>> http://www.eecs.uottawa.ca/~tcl
>>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Umple-Dev" group.
>>> To post to this group, send an email to umpl...@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> umple-dev+...@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/umple-dev?hl=en-GB.
>>>
>>>
>>>
>>
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Umple-Dev" group.
>> To post to this group, send an email to umpl...@googlegroups.com.
>> To unsubscribe from this group, send email to
>> umple-dev+...@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/umple-dev?hl=en-GB.
>>
>
>
> Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
> Professor of Software Engineering and Computer Science

> / Professeur Titulaire de génie logiciel et d'informatique

> Faculté de genie / Faculty of Engineering
> University of Ottawa / Université d'Ottawa

adzi...@uwaterloo.ca

unread,
Mar 31, 2012, 5:55:46 PM3/31/12
to umpl...@googlegroups.com
Hi everyone.
One of the essential things I want to implement in SQL generation
before the end of the term is the addition of a small preprocessor
that will modify the meta-model after its creation is complete, but
before any code is generated.
The purpose of such a preprocessor is to correct certain things in the
meta-model so that when the SQL is generated, it is valid. The best
example of the sort of thing the preprocessor will be in charge of is
the resolution of what each Umple class's keys are (since this detail
is often left out of the user's .ump file).

The question I have is, where should I add the method call to the
preprocessor?

Thanks.

-Adam

Andrew Forward

unread,
Mar 31, 2012, 10:16:08 PM3/31/12
to umpl...@googlegroups.com

This is already is place for other languages like Java, PHP, Ruby.  I suggest that you apply the same  approach and put the model transformation as part of the code generation, as opposed to part of meta-model creation.

Also, please make sure that you clean up / undo any changes that you make to the model.  This ensures consistency of the actual meta model that we build and maintain versus the meta-model required / preferred for code generation.

The general pattern used in the Java/PHP/.. generators is:

  public void generate()
  {
    prepare();
    ...    
    GeneratorHelper.postpare(model);
  }

Within the "prepare" you alter the meta-model to help with code generation (e.g. adding constraints using before / after hooks, adding new "null" states, etc).  

The "postpare" (or cleanup) undoes those changes in a generic way.  This is possible because all modifications (thus far) to the meta-model have involved adding to the meta-model, and we include the notion of a "IsInternal" flag, which can be auto-cleaned after code generation.

And here is an example of where we "add" temporary elements to help with the code generation:

        String code = StringFormatter.format("if (!{0}) { return false; }",translate("attributeCanSet",av));
        CodeInjection set = new CodeInjection("before",translate("setMethod",av) , code);
        set.setIsInternal(true);
        aClass.addCodeInjection(set);

In addition to the above, it appears like you will need to update the "Key" with an IsInternal flag (similar to other classes that already have that flag), as well as update the GeneratorHelper.postpare to check for "internal" keys.

andrew f



-Adam



--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.




--
aforward

adzi...@uwaterloo.ca

unread,
Mar 31, 2012, 10:52:03 PM3/31/12
to umpl...@googlegroups.com
Thanks Andrew. I'll get to work right away.

-Adam

Quoting Andrew Forward <afor...@gmail.com>:

>> To unsubscribe from this group, send email to umple-dev+unsubscribe@**
>> googlegroups.com <umple-dev%2Bunsu...@googlegroups.com>.
>> For more options, visit this group at http://groups.google.com/**
>> group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>> .
>>
>>
>
>
> --
> aforward


>
> --
> You received this message because you are subscribed to the Google
> Groups "Umple-Dev" group.
> To post to this group, send an email to umpl...@googlegroups.com.
> To unsubscribe from this group, send email to

> umple-dev+...@googlegroups.com.

adzi...@uwaterloo.ca

unread,
Apr 8, 2012, 4:30:33 AM4/8/12
to umpl...@googlegroups.com
Hi everyone.
I'd was wondering if anyone knows why I'm getting this error. It
occurs during the Umple build process. Some tests are attempting to be
run, but for some reason I get the following error:

cruise/umple/compiler/SqlGenerator (wrong name:
cruise/umple/compiler/SQLGenerator)

The rest of the stack trace is below. The issue seems to be that the
generate target is "Sql" instead of "SQL". Does anyone know how that
could happen? I am able to compile .ump files to .sql no problem.
These tests are the only thing that shows the problem.

Stack trace:
java.lang.NoClassDefFoundError: cruise/umple/compiler/SqlGenerator
(wrong name: cruise/umple/compiler/SQLGenerator)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:791)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:449)
at java.net.URLClassLoader.access$100(URLClassLoader.java:71)
at java.net.URLClassLoader$1.run(URLClassLoader.java:361)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:186)
at cruise.umple.compiler.UmpleModel.generate(UmpleModel.java:679)
at
cruise.umple.compiler.UmpleInternalParser.analyze(UmpleInternalParser.java:155)
at
cruise.umple.implementation.TemplateTest.createUmpleSystem(TemplateTest.java:268)
at
cruise.umple.implementation.TemplateTest.assertUmpleTemplateFor(TemplateTest.java:213)
at cruise.umple.implementation.NToNTest.Association(NToNTest.java:20)

Thanks for your help.

-Adam

Andrew Forward

unread,
Apr 8, 2012, 8:56:59 AM4/8/12
to umpl...@googlegroups.com
Looks like SQL versus Sql.

- aforward

Timothy Lethbridge

unread,
Apr 8, 2012, 12:34:05 PM4/8/12
to umpl...@googlegroups.com
Hi,

The generate statement is suppsed to have 'Sql' as its target (mixed case,
to be consistent with other languages; probably an error, but that is the
way it is).

On the other hand, when the directory was set it is UmpleToSQL (all
Upperase)

And the suffix of generated files is 'sql' (all lowercase)

> --
> You received this message because you are subscribed to the Google Groups
> "Umple-Dev" group.
> To post to this group, send an email to umpl...@googlegroups.com.
> To unsubscribe from this group, send email to
> umple-dev+...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>


Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
Professor of Software Engineering and Computer Science

/ Professeur Titulaire de g�nie logiciel et d'informatique

Facult� de genie / Faculty of Engineering
University of Ottawa / Universit� d'Ottawa

adzi...@uwaterloo.ca

unread,
Apr 8, 2012, 2:56:43 PM4/8/12
to umpl...@googlegroups.com
Thanks Andrew and Tim for your responses.

Using "Sql" in the generate statement causes a parse error. "SQL"
works though.
I tried changing every file/class name I could find that had "SQL" in
its name to "Sql" but that caused lots and lots of errors.

Is renaming everything the right course of action and I just didn't
find everything that needed to be renamed, or should I be doing
something else to fix this?

-Adam


Quoting Timothy Lethbridge <t...@eecs.uottawa.ca>:

> / Professeur Titulaire de génie logiciel et d'informatique

> Faculté de genie / Faculty of Engineering
> University of Ottawa / Université d'Ottawa


> Tel: 613-562-5800x6685 Fax: 613-562-5664 Mobile: 613-252-1850
> http://www.eecs.uottawa.ca/~tcl
>

Andrew Forward

unread,
Apr 8, 2012, 3:19:17 PM4/8/12
to umpl...@googlegroups.com
I would update references to be Sql.

The reason it fails is because java is case sensitive and we use reflection to load language generators so the class names need to align perfectly, Java to JavaGenerator, Php to PhpGenerator, etc.

- aforward

adzi...@uwaterloo.ca

unread,
Apr 8, 2012, 10:48:19 PM4/8/12
to umpl...@googlegroups.com
Thanks Andrew. After receiving your reply I got to work on changing
all the "SQL"s into "Sql" using a thorough search. I managed to find
all of the problem strings and got everything working as a result.
Everything has been committed now. I doubt I'll commit anything new
from now till Wednesday. I've got exams to study for.

Please take a look at my latest log entry. It has more details about
what I committed.

Thanks again.

-Adam

Andrew Forward

unread,
Apr 9, 2012, 7:16:18 AM4/9/12
to umpl...@googlegroups.com

The build is broken.

Taking a look, but my guess is case sensitivity (on Windows files are not case sensitive, so these sometimes only manifest on a linux / mac machine).


/h/ralph/umple/trunk/build/build.xml:7: /h/ralph/umple/trunk/build/build.xml:15: The following error occurred while executing this line:
/h/ralph/umple/trunk/build/build.umple.xml:321: The following error occurred while executing this line:
/h/ralph/umple/trunk/build/build.umple.xml:80: /h/ralph/umple/trunk/UmpleToSQL/src/cruise/umple/compiler/sql does not exist.



Quoting Andrew Forward <afor...@gmail.com>:

To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.



Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
Professor of Software Engineering and Computer Science
/ Professeur Titulaire de génie logiciel et d'informatique
Faculté de genie / Faculty of Engineering
University of Ottawa / Université d'Ottawa
Tel: 613-562-5800x6685   Fax: 613-562-5664    Mobile: 613-252-1850
http://www.eecs.uottawa.ca/~tcl

--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.







--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.


--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.







--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.




--
aforward

Timothy Lethbridge

unread,
Apr 9, 2012, 8:53:28 AM4/9/12
to umpl...@googlegroups.com
Thanks for ixing the build. I see it was your commit that fixed it.

- Tim

> umple-dev+...@googlegroups.com.


> For more
> options, visit
> this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>
>
>
> Timothy C. Lethbridge, PhD,
> P.Eng., I.S.P., CSDP
> Professor of Software
> Engineering and Computer
> Science
> / Professeur Titulaire de

> g�nie logiciel et
> d'informatique

> Facult� de genie / Faculty


> of Engineering
> University of Ottawa /

> Universit� d'Ottawa


> Tel: 613-562-5800x6685
> Fax: 613-562-5664
> �Mobile: 613-252-1850
> http://www.eecs.uottawa.ca/~tcl
>
> --
> You received this message
> because you are subscribed
> to the Google Groups
> "Umple-Dev" group.
> To post to this group, send
> an email to
> umpl...@googlegroups.com.
> To unsubscribe from this
> group, send email to

> umple-dev+...@googlegroups.com.


> For more options, visit
> this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>
>
>
>
>
>
>
> --
> You received this message because you
> are subscribed to the Google Groups
> "Umple-Dev" group.
> To post to this group, send an email to
> umpl...@googlegroups.com.
> To unsubscribe from this group, send
> email to

> umple-dev+...@googlegroups.com.


> For more options, visit this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>
>
> --
> You received this message because you are
> subscribed to the Google Groups "Umple-Dev" group.
> To post to this group, send an email to
> umpl...@googlegroups.com.
> To unsubscribe from this group, send email to

> umple-dev+...@googlegroups.com.


> For more options, visit this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>
>
>
>
>
>
>
> --
> You received this message because you are subscribed to the
> Google Groups "Umple-Dev" group.
> To post to this group, send an email to
> umpl...@googlegroups.com.
> To unsubscribe from this group, send email to

> umple-dev+...@googlegroups.com.


> For more options, visit this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>
>
>
>
> --
> aforward
>

> --
> You received this message because you are subscribed to the Google Groups
> "Umple-Dev" group.
> To post to this group, send an email to umpl...@googlegroups.com.
> To unsubscribe from this group, send email to

> umple-dev+...@googlegroups.com.


> For more options, visit this group at
> http://groups.google.com/group/umple-dev?hl=en-GB.
>
>


Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
Professor of Software Engineering and Computer Science

/ Professeur Titulaire de g�nie logiciel et d'informatique

Facult� de genie / Faculty of Engineering
University of Ottawa / Universit� d'Ottawa

Andrew Forward

unread,
Apr 9, 2012, 1:10:16 PM4/9/12
to umpl...@googlegroups.com

I did fix it.  Just was not able to send out an update - good thing the build machine does that for us :-)

For Adam, in future please give a quick look at cc.umple.org after you commit changes (and are 'done' working) to make sure things on the build server work - as there are some differences between your local environment and the build machine. 

andrew f

                             umple-dev+unsubscribe@googlegroups.com.

                             For more
                             options, visit
                             this group at
                             http://groups.google.com/group/umple-dev?hl=en-GB.



                       Timothy C. Lethbridge, PhD,
                       P.Eng., I.S.P., CSDP
                       Professor of Software
                       Engineering and Computer
                       Science
                       / Professeur Titulaire de
                       génie logiciel et
                       d'informatique
                       Faculté de genie / Faculty

                       of Engineering
                       University of Ottawa /
                       Université d'Ottawa

                       Tel: 613-562-5800x6685
                       Fax: 613-562-5664
                        Mobile: 613-252-1850
                       http://www.eecs.uottawa.ca/~tcl

                       --
                       You received this message
                       because you are subscribed
                       to the Google Groups
                       "Umple-Dev" group.
                       To post to this group, send
                       an email to
                       umpl...@googlegroups.com.
                       To unsubscribe from this
                       group, send email to
                       umple-dev+unsubscribe@googlegroups.com.

                       For more options, visit
                       this group at
                       http://groups.google.com/group/umple-dev?hl=en-GB.







                 --
                 You received this message because you
                 are subscribed to the Google Groups
                 "Umple-Dev" group.
                 To post to this group, send an email to
                 umpl...@googlegroups.com.
                 To unsubscribe from this group, send
                 email to
                 umple-dev+unsubscribe@googlegroups.com.

                 For more options, visit this group at
                 http://groups.google.com/group/umple-dev?hl=en-GB.


           --
           You received this message because you are
           subscribed to the Google Groups "Umple-Dev" group.
           To post to this group, send an email to
           umpl...@googlegroups.com.
           To unsubscribe from this group, send email to

           For more options, visit this group at
           http://groups.google.com/group/umple-dev?hl=en-GB.







     --
     You received this message because you are subscribed to the
     Google Groups "Umple-Dev" group.
     To post to this group, send an email to
     umpl...@googlegroups.com.
     To unsubscribe from this group, send email to

     For more options, visit this group at
     http://groups.google.com/group/umple-dev?hl=en-GB.




--
aforward

--
You received this message because you are subscribed to the Google Groups
"Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to

For more options, visit this group at
http://groups.google.com/group/umple-dev?hl=en-GB.




Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
Professor of Software Engineering and Computer Science
/ Professeur Titulaire de génie logiciel et d'informatique
Faculté de genie / Faculty of Engineering
University of Ottawa / Université d'Ottawa

Tel: 613-562-5800x6685   Fax: 613-562-5664    Mobile: 613-252-1850
http://www.eecs.uottawa.ca/~tcl

--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.




--
aforward

adzi...@uwaterloo.ca

unread,
Apr 9, 2012, 3:13:21 PM4/9/12
to umpl...@googlegroups.com
Thanks Andrew.
I thought I preemptively took care of this by deleting the UmpleToSQL
folder and adding the UmpleToSql folder (a duplicate, but different
name). I guess that was not the case though.

Thanks for pointing me to that CruiseControl page. I didn't know about
its existence 'till now.

-Adam


Quoting Andrew Forward <afor...@gmail.com>:

> I did fix it. Just was not able to send out an update - good thing the
> build machine does that for us :-)
>
> For Adam, in future please give a quick look at cc.umple.org after you
> commit changes (and are 'done' working) to make sure things on the build
> server work - as there are some differences between your local environment
> and the build machine.
>
> andrew f
>
> On Mon, Apr 9, 2012 at 8:53 AM, Timothy Lethbridge
> <t...@eecs.uottawa.ca>wrote:
>
>> Thanks for ixing the build. I see it was your commit that fixed it.
>>
>> - Tim
>>
>>
>> On Mon, 9 Apr 2012, Andrew Forward wrote:
>>
>>
>>> The build is broken.
>>> Taking a look, but my guess is case sensitivity (on Windows files are not
>>> case sensitive, so these sometimes only manifest on a linux / mac
>>> machine).
>>>

>>> /h/ralph/umple/trunk/build/**build.xml:7:
>>> /h/ralph/umple/trunk/build/**build.xml:15:


>>> The following error occurred while executing this line:

>>> /h/ralph/umple/trunk/build/**build.umple.xml:321: The following error


>>> occurred while executing this line:

>>> /h/ralph/umple/trunk/build/**build.umple.xml:80: /h/ralph/umple/trunk/**
>>> UmpleToSQL/src/cruise/umple/**compiler/sql does not exist.

>>> cruise/umple/compiler/**SqlGenerator
>>> (wrong name:
>>> cruise/umple/compiler/**SQLGenerator)


>>>
>>> The rest of the
>>> stack trace is
>>> below. The
>>> issue seems to
>>> be that the
>>> generate target
>>> is "Sql"
>>> instead of
>>> "SQL". Does
>>> anyone know how
>>> that could
>>> happen? I am
>>> able to compile
>>> .ump files to
>>> .sql no
>>> problem. These
>>> tests are the
>>> only thing that
>>> shows the
>>> problem.
>>>
>>> Stack trace:

>>> java.lang.**NoClassDefFoundError:
>>> cruise/umple/compiler/**SqlGenerator
>>> (wrong name:
>>> cruise/umple/compiler/**SQLGenerator)
>>> at
>>> java.lang.ClassLoader.**defineClass1(Native
>>> Method)
>>> at
>>> java.lang.ClassLoader.**
>>> defineClass(ClassLoader.java:**791)
>>> at
>>> java.security.**
>>> SecureClassLoader.defineClass(**SecureClassLoader.java:142)
>>> at
>>> java.net.URLClassLoader.**
>>> defineClass(URLClassLoader.**java:449)
>>> at
>>> java.net.URLClassLoader.**
>>> access$100(URLClassLoader.**java:71)
>>> at
>>> java.net.URLClassLoader$1.run(**
>>> URLClassLoader.java:361)
>>> at
>>> java.net.URLClassLoader$1.run(**
>>> URLClassLoader.java:355)
>>> at
>>> java.security.**
>>> AccessController.doPrivileged(**Native
>>> Method)
>>> at
>>> java.net.URLClassLoader.**
>>> findClass(URLClassLoader.java:**354)
>>> at
>>> java.lang.ClassLoader.**
>>> loadClass(ClassLoader.java:**423)
>>> at
>>> sun.misc.Launcher$**
>>> AppClassLoader.loadClass(**Launcher.java:308)
>>> at
>>> java.lang.ClassLoader.**
>>> loadClass(ClassLoader.java:**356)
>>> at
>>> java.lang.Class.forName0(**Native
>>> Method)
>>> at
>>> java.lang.Class.forName(Class.**java:186)
>>> at
>>> cruise.umple.compiler.**UmpleModel.generate(
>>> **UmpleModel.java:679)
>>> at
>>> cruise.umple.compiler.**
>>> UmpleInternalParser.analyze(**UmpleInternalParser.java:155)
>>> at
>>> cruise.umple.implementation.**TemplateTest.*
>>> *createUmpleSystem(**TemplateTest.java:268)
>>> atcruise.umple.implementation.**
>>> TemplateTest.**assertUmpleTemplateFor(**TemplateTest.java:
>>> 213)
>>> at
>>> cruise.umple.implementation.**
>>> NToNTest.Association(NToNTest.**java:20)


>>>
>>> Thanks for your
>>> help.
>>>
>>> -Adam
>>>
>>>
>>>
>>> --
>>> You received
>>> this message
>>> because you are
>>> subscribed to
>>> the Google
>>> Groups
>>> "Umple-Dev"
>>> group.
>>> To post to this
>>> group, send an
>>> email to
>>> umpl...@googlegroups.com.
>>> To unsubscribe
>>> from this
>>> group, send
>>> email to
>>>

>>> umple-dev+unsubscribe@**googlegroups.com<umple-dev%2Bunsu...@googlegroups.com>


>>> .
>>> For more
>>> options, visit
>>> this group at

>>> http://groups.google.com/**
>>> group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>>> .
>>>
>>>
>>>

>>> Timothy C. Lethbridge, PhD,
>>> P.Eng., I.S.P., CSDP
>>> Professor of Software
>>> Engineering and Computer
>>> Science
>>> / Professeur Titulaire de
>>> génie logiciel et
>>> d'informatique
>>> Faculté de genie / Faculty
>>> of Engineering
>>> University of Ottawa /
>>> Université d'Ottawa
>>> Tel: 613-562-5800x6685
>>> Fax: 613-562-5664
>>> Mobile: 613-252-1850
>>>

>>> http://www.eecs.uottawa.ca/~**tcl<http://www.eecs.uottawa.ca/~tcl>


>>>
>>> --
>>> You received this message
>>> because you are subscribed
>>> to the Google Groups
>>> "Umple-Dev" group.
>>> To post to this group, send
>>> an email to
>>> umpl...@googlegroups.com.
>>> To unsubscribe from this
>>> group, send email to
>>>

>>> umple-dev+unsubscribe@**googlegroups.com<umple-dev%2Bunsu...@googlegroups.com>


>>> .
>>> For more options, visit
>>> this group at

>>> http://groups.google.com/**
>>> group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>>> .
>>>
>>>
>>>
>>>
>>>
>>>
>>>

>>> --
>>> You received this message because you
>>> are subscribed to the Google Groups
>>> "Umple-Dev" group.
>>> To post to this group, send an email to
>>> umpl...@googlegroups.com.
>>> To unsubscribe from this group, send
>>> email to
>>>

>>> umple-dev+unsubscribe@**googlegroups.com<umple-dev%2Bunsu...@googlegroups.com>


>>> .
>>> For more options, visit this group at
>>>

>>> http://groups.google.com/**group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>>> .


>>>
>>>
>>> --
>>> You received this message because you are
>>> subscribed to the Google Groups "Umple-Dev" group.
>>> To post to this group, send an email to
>>> umpl...@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>>

>>> umple-dev+unsubscribe@**googlegroups.com<umple-dev%2Bunsu...@googlegroups.com>


>>> .
>>> For more options, visit this group at
>>>

>>> http://groups.google.com/**group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>>> .


>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the
>>> Google Groups "Umple-Dev" group.
>>> To post to this group, send an email to
>>> umpl...@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>>

>>> umple-dev+unsubscribe@**googlegroups.com<umple-dev%2Bunsu...@googlegroups.com>


>>> .
>>> For more options, visit this group at
>>>

>>> http://groups.google.com/**group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>


>>> .
>>>
>>>
>>>
>>>
>>> --
>>> aforward
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "Umple-Dev" group.
>>> To post to this group, send an email to umpl...@googlegroups.com.
>>> To unsubscribe from this group, send email to

>>> umple-dev+unsubscribe@**googlegroups.com<umple-dev%2Bunsu...@googlegroups.com>


>>> .
>>> For more options, visit this group at

>>> http://groups.google.com/**group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>


>>> .
>>>
>>>
>>>
>>
>> Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
>> Professor of Software Engineering and Computer Science
>> / Professeur Titulaire de génie logiciel et d'informatique
>> Faculté de genie / Faculty of Engineering
>> University of Ottawa / Université d'Ottawa
>> Tel: 613-562-5800x6685 Fax: 613-562-5664 Mobile: 613-252-1850

>> http://www.eecs.uottawa.ca/~**tcl <http://www.eecs.uottawa.ca/~tcl>


>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Umple-Dev" group.
>> To post to this group, send an email to umpl...@googlegroups.com.

>> To unsubscribe from this group, send email to umple-dev+unsubscribe@**
>> googlegroups.com <umple-dev%2Bunsu...@googlegroups.com>.
>> For more options, visit this group at http://groups.google.com/**
>> group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>> .
>>
>>
>
>

> --
> aforward
>
> --
> You received this message because you are subscribed to the Google
> Groups "Umple-Dev" group.
> To post to this group, send an email to umpl...@googlegroups.com.
> To unsubscribe from this group, send email to

> umple-dev+...@googlegroups.com.

Andrew Forward

unread,
Apr 9, 2012, 3:37:37 PM4/9/12
to umpl...@googlegroups.com

The folders were properly renamed, but the build scripts (./trunk/build/) still had references to SQL for the path.  This most likely works fine on Windows (non case sensitive directory names), but would result with problems on a Mac and Linux.

andrew f 


googlegroups.com <umple-dev%2Bunsubscribe@googlegroups.com>.

For more options, visit this group at http://groups.google.com/**
group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
.




--
aforward

--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.


--
You received this message because you are subscribed to the Google Groups "Umple-Dev" group.
To post to this group, send an email to umpl...@googlegroups.com.
To unsubscribe from this group, send email to umple-dev+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/umple-dev?hl=en-GB.




--
aforward

adzi...@uwaterloo.ca

unread,
Apr 9, 2012, 3:51:04 PM4/9/12
to umpl...@googlegroups.com
Ah. I see. I didn't realize that my "thorough search" omitted the
build directory...
Thanks again for fixing it for me.

-Adam

Quoting Andrew Forward <afor...@gmail.com>:

>>>>> /h/ralph/umple/trunk/build/****build.xml:7:
>>>>> /h/ralph/umple/trunk/build/****build.xml:15:


>>>>>
>>>>> The following error occurred while executing this line:

>>>>> /h/ralph/umple/trunk/build/****build.umple.xml:321: The following error


>>>>>
>>>>> occurred while executing this line:

>>>>> /h/ralph/umple/trunk/build/****build.umple.xml:80:
>>>>> /h/ralph/umple/trunk/**
>>>>> UmpleToSQL/src/cruise/umple/****compiler/sql does not exist.

>>>>> cruise/umple/compiler/****SqlGenerator
>>>>> (wrong name:
>>>>> cruise/umple/compiler/****SQLGenerator)


>>>>>
>>>>>
>>>>> The rest of the
>>>>> stack trace is
>>>>> below. The
>>>>> issue seems to
>>>>> be that the
>>>>> generate target
>>>>> is "Sql"
>>>>> instead of
>>>>> "SQL". Does
>>>>> anyone know how
>>>>> that could
>>>>> happen? I am
>>>>> able to compile
>>>>> .ump files to
>>>>> .sql no
>>>>> problem. These
>>>>> tests are the
>>>>> only thing that
>>>>> shows the
>>>>> problem.
>>>>>
>>>>> Stack trace:

>>>>> java.lang.****NoClassDefFoundError:
>>>>> cruise/umple/compiler/****SqlGenerator
>>>>> (wrong name:
>>>>> cruise/umple/compiler/****SQLGenerator)
>>>>> at
>>>>> java.lang.ClassLoader.****
>>>>> defineClass1(Native
>>>>> Method)
>>>>> at
>>>>> java.lang.ClassLoader.**
>>>>> defineClass(ClassLoader.java:****791)
>>>>> at
>>>>> java.security.**
>>>>> SecureClassLoader.defineClass(****SecureClassLoader.java:142)
>>>>> at
>>>>> java.net.URLClassLoader.**
>>>>> defineClass(URLClassLoader.****java:449)
>>>>> at
>>>>> java.net.URLClassLoader.**
>>>>> access$100(URLClassLoader.****java:71)
>>>>> at
>>>>> java.net.URLClassLoader$1.run(****
>>>>> URLClassLoader.java:361)
>>>>> at
>>>>> java.net.URLClassLoader$1.run(****
>>>>> URLClassLoader.java:355)
>>>>> at
>>>>> java.security.**
>>>>> AccessController.doPrivileged(****Native
>>>>> Method)
>>>>> at
>>>>> java.net.URLClassLoader.**
>>>>> findClass(URLClassLoader.java:****354)
>>>>> at
>>>>> java.lang.ClassLoader.**
>>>>> loadClass(ClassLoader.java:****423)
>>>>> at
>>>>> sun.misc.Launcher$**
>>>>> AppClassLoader.loadClass(****Launcher.java:308)
>>>>> at
>>>>> java.lang.ClassLoader.**
>>>>> loadClass(ClassLoader.java:****356)
>>>>> at
>>>>> java.lang.Class.forName0(****Native
>>>>> Method)
>>>>> at
>>>>> java.lang.Class.forName(Class.****java:186)
>>>>> at
>>>>> cruise.umple.compiler.****
>>>>> UmpleModel.generate(
>>>>> **UmpleModel.java:679)
>>>>> at
>>>>> cruise.umple.compiler.**
>>>>> UmpleInternalParser.analyze(****UmpleInternalParser.java:155)
>>>>> at
>>>>> cruise.umple.implementation.****
>>>>> TemplateTest.*
>>>>> *createUmpleSystem(****TemplateTest.java:268)
>>>>> atcruise.umple.implementation.****
>>>>> TemplateTest.****assertUmpleTemplateFor(****TemplateTest.java:
>>>>> 213)
>>>>> at
>>>>> cruise.umple.implementation.**
>>>>> NToNTest.Association(NToNTest.****java:20)


>>>>>
>>>>>
>>>>> Thanks for your
>>>>> help.
>>>>>
>>>>> -Adam
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> You received
>>>>> this message
>>>>> because you are
>>>>> subscribed to
>>>>> the Google
>>>>> Groups
>>>>> "Umple-Dev"
>>>>> group.
>>>>> To post to this
>>>>> group, send an
>>>>> email to
>>>>> umpl...@googlegroups.com.
>>>>> To unsubscribe
>>>>> from this
>>>>> group, send
>>>>> email to
>>>>>

>>>>> umple-dev+unsubscribe@**google**groups.com<http://googlegroups.com>
>>>>> <umple-dev%**2Bunsu...@googlegroups.com<umple-dev%252Buns...@googlegroups.com>
>>>>> **>


>>>>>
>>>>> .
>>>>> For more
>>>>> options, visit
>>>>> this group at
>>>>> http://groups.google.com/**

>>>>> group/umple-dev?hl=en-GB<http:**//groups.google.com/group/**
>>>>> umple-dev?hl=en-GB <http://groups.google.com/group/umple-dev?hl=en-GB>>


>>>>>
>>>>> .
>>>>>
>>>>>
>>>>>
>>>>> Timothy C. Lethbridge, PhD,
>>>>> P.Eng., I.S.P., CSDP
>>>>> Professor of Software
>>>>> Engineering and Computer
>>>>> Science
>>>>> / Professeur Titulaire de
>>>>> génie logiciel et
>>>>> d'informatique
>>>>> Faculté de genie / Faculty
>>>>> of Engineering
>>>>> University of Ottawa /
>>>>> Université d'Ottawa
>>>>> Tel: 613-562-5800x6685
>>>>> Fax: 613-562-5664
>>>>> Mobile: 613-252-1850
>>>>>

>>>>> http://www.eecs.uottawa.ca/~****tcl<http://www.eecs.uottawa.ca/~**tcl>
>>>>> <http://www.eecs.uottawa.**ca/~tcl <http://www.eecs.uottawa.ca/~tcl>>


>>>>>
>>>>>
>>>>> --
>>>>> You received this message
>>>>> because you are subscribed
>>>>> to the Google Groups
>>>>> "Umple-Dev" group.
>>>>> To post to this group, send
>>>>> an email to
>>>>> umpl...@googlegroups.com.
>>>>> To unsubscribe from this
>>>>> group, send email to
>>>>>

>>>>> umple-dev+unsubscribe@**google**groups.com<http://googlegroups.com>
>>>>> <umple-dev%**2Bunsu...@googlegroups.com<umple-dev%252Buns...@googlegroups.com>
>>>>> **>


>>>>>
>>>>> .
>>>>> For more options, visit
>>>>> this group at
>>>>> http://groups.google.com/**

>>>>> group/umple-dev?hl=en-GB<http:**//groups.google.com/group/**
>>>>> umple-dev?hl=en-GB <http://groups.google.com/group/umple-dev?hl=en-GB>>


>>>>>
>>>>> .
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you
>>>>> are subscribed to the Google Groups
>>>>> "Umple-Dev" group.
>>>>> To post to this group, send an email to
>>>>> umpl...@googlegroups.com.
>>>>> To unsubscribe from this group, send
>>>>> email to
>>>>>

>>>>> umple-dev+unsubscribe@**google**groups.com<http://googlegroups.com>
>>>>> <umple-dev%**2Bunsu...@googlegroups.com<umple-dev%252Buns...@googlegroups.com>
>>>>> **>


>>>>>
>>>>> .
>>>>> For more options, visit this group at
>>>>>

>>>>> http://groups.google.com/****group/umple-dev?hl=en-GB<http://groups.google.com/**group/umple-dev?hl=en-GB>
>>>>> <http:**//groups.google.com/group/**umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>


>>>>> >
>>>>>
>>>>> .
>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are
>>>>> subscribed to the Google Groups "Umple-Dev" group.
>>>>> To post to this group, send an email to
>>>>> umpl...@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>>

>>>>> umple-dev+unsubscribe@**google**groups.com<http://googlegroups.com>
>>>>> <umple-dev%**2Bunsu...@googlegroups.com<umple-dev%252Buns...@googlegroups.com>
>>>>> **>


>>>>>
>>>>> .
>>>>> For more options, visit this group at
>>>>>

>>>>> http://groups.google.com/****group/umple-dev?hl=en-GB<http://groups.google.com/**group/umple-dev?hl=en-GB>
>>>>> <http:**//groups.google.com/group/**umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>


>>>>> >
>>>>>
>>>>> .
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the
>>>>> Google Groups "Umple-Dev" group.
>>>>> To post to this group, send an email to
>>>>> umpl...@googlegroups.com.
>>>>> To unsubscribe from this group, send email to

>>>>> umple-dev+unsubscribe@**google**groups.com<http://googlegroups.com>
>>>>> <umple-dev%**2Bunsu...@googlegroups.com<umple-dev%252Buns...@googlegroups.com>
>>>>> **>


>>>>>
>>>>> .
>>>>> For more options, visit this group at
>>>>>

>>>>> http://groups.google.com/****group/umple-dev?hl=en-GB<http://groups.google.com/**group/umple-dev?hl=en-GB>
>>>>> <http:**//groups.google.com/group/**umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>


>>>>> >
>>>>>
>>>>> .
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> aforward
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> "Umple-Dev" group.
>>>>> To post to this group, send an email to umpl...@googlegroups.com.
>>>>> To unsubscribe from this group, send email to

>>>>> umple-dev+unsubscribe@**google**groups.com <http://googlegroups.com><
>>>>> umple-dev%**2Bunsu...@googlegroups.com<umple-dev%252Buns...@googlegroups.com>
>>>>> **>


>>>>>
>>>>> .
>>>>> For more options, visit this group at

>>>>> http://groups.google.com/****group/umple-dev?hl=en-GB<http://groups.google.com/**group/umple-dev?hl=en-GB>
>>>>> <http:**//groups.google.com/group/**umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>


>>>>> >
>>>>> .
>>>>>
>>>>>
>>>>>
>>>>>
>>>> Timothy C. Lethbridge, PhD, P.Eng., I.S.P., CSDP
>>>> Professor of Software Engineering and Computer Science
>>>> / Professeur Titulaire de génie logiciel et d'informatique
>>>> Faculté de genie / Faculty of Engineering
>>>> University of Ottawa / Université d'Ottawa
>>>> Tel: 613-562-5800x6685 Fax: 613-562-5664 Mobile: 613-252-1850

>>>> http://www.eecs.uottawa.ca/~****tcl <http://www.eecs.uottawa.ca/~**tcl><


>>>> http://www.eecs.uottawa.ca/~**tcl <http://www.eecs.uottawa.ca/~tcl>>
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "Umple-Dev" group.
>>>> To post to this group, send an email to umpl...@googlegroups.com.
>>>> To unsubscribe from this group, send email to umple-dev+unsubscribe@**
>>>> googlegroups.com

>>>> <umple-dev%2Bunsubscribe@**googlegroups.com<umple-dev%252Buns...@googlegroups.com>


>>>> >.
>>>> For more options, visit this group at http://groups.google.com/**

>>>> group/umple-dev?hl=en-GB<http:**//groups.google.com/group/**
>>>> umple-dev?hl=en-GB <http://groups.google.com/group/umple-dev?hl=en-GB>>


>>>> .
>>>>
>>>>
>>>>
>>>
>>> --
>>> aforward
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "Umple-Dev" group.
>>> To post to this group, send an email to umpl...@googlegroups.com.
>>> To unsubscribe from this group, send email to umple-dev+unsubscribe@**

>>> googlegroups.com <umple-dev%2Bunsu...@googlegroups.com>.


>>> For more options, visit this group at http://groups.google.com/**
>>> group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>>> .
>>>
>>>
>>>
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Umple-Dev" group.
>> To post to this group, send an email to umpl...@googlegroups.com.
>> To unsubscribe from this group, send email to umple-dev+unsubscribe@**

>> googlegroups.com <umple-dev%2Bunsu...@googlegroups.com>.


>> For more options, visit this group at http://groups.google.com/**
>> group/umple-dev?hl=en-GB<http://groups.google.com/group/umple-dev?hl=en-GB>
>> .
>>
>>
>
>
> --

> aforward
>
> --
> You received this message because you are subscribed to the Google
> Groups "Umple-Dev" group.
> To post to this group, send an email to umpl...@googlegroups.com.
> To unsubscribe from this group, send email to

> umple-dev+...@googlegroups.com.

Reply all
Reply to author
Forward
0 new messages