UKHAS

I have been working on making my first project come true. But, I have run into some concerning

Hello Everyone! I will do a workshop in Goslar, Germany at the "AATiS Bundeskongress"

This sounds really cool Steve! Cheers, Dan On Tue, Feb 18, 2025 at 05:44 Steve <steve@

Hi everyone, 9 months in, I finally seem to have my tracker and receiver working and so turning

The Summer months are generally far better than the winter. In the winter I have had flights that

Dear jacqueline day, Thank you for your reply, know that since all these years of monitoring all the

I couldn't find any info on using the flextrak in combination with an rpi online. If you'd

Aw noo, I bet you and the students are gutted! I'll have my system set and ready, so hopefully

The tracker that was still attached (the one that stopped during descent) - is in good condition -

OK, so it looks like the programmer isn't responding. I would suspect that the Chinese

I found this useful site the other day - it gives a google earth 3d view of airspace which you can

I really enjoyed this write up, thanks! Definitely given me some ideas for my next flight, and I didn

Hi all, So I just got myself a flex track with the Aprs add on. I'm starting at looking into

This solar-powered pico-balloon was tracked passing the Faroes on Thursday afternoon, with a

G On Saturday, September 21, 2024 at 8:01:21 PM UTC+1 Gavin Gill wrote: Please ignore this, I managed

Of course, of course! That was a joke! On Fri, Aug 23, 2024 at 11:28 PM Mark Goergen <mark.goergen

Please try not to create another Hindenburg. (: On Mon, Aug 19, 2024 at 2:04 PM Mika Köching <mika

Kev, Yes, I added the tape when it was fully stretched. I expected it to wrinkle when deflated but I

On Wed 14 Aug John Laidler wrote: > After 2 hours and at an altitude of about 7000m and still

Steve, A copy of my application is enclosed for info. John M0WIV On Saturday 10 August 2024 at 12:43:

Yes I've seen that (browning) too, but this one looked perfect. It's my last HY1600 so I'

Thank you Ross, Good shout about testing on next launch. 👍🏻 Also my splitter is 75ohm, doh! So I'

Hi Ross Yes..We retrieved the flight! - Landed in Moreton-In-Marsh, in a field right by a road, so a

Hi all, and Mark BALLOON in the air... LoRA : protocole Lorawan 1.0.4 frequence EU868 ident

Wowa wee wah, think I finally got it working. Thank you all for the help, and sorry if I spammed the

Argh, right over my way, but I'm away for the week and the aerial isn't currently connected

Hi all, Amateur balloon release tomorrow Sunday June 30, 2024 at 10:30 am local. QRG: 434.775 MHz

If you can't transmit then the SPI stuff must be fine. You might not have the chip in LoRa mode.

Just figured it out myself. One has to set the EOM knob to "..." and not a number. That

Well done Tom! I was picking up your LoRa transmitter very well, even though your chosen frequency