I have tried Port Forwarding on my router and enabled DMZ as suggested
by Linksys. - Still doesn't work!!
Any ideas anyone?
TIA!
ras
-- ras
1. Line tab setting; change "Nat Mapping Enable" to yes
2. SIP tab; change "Substitute VIA Addr" to yes, and "EXT IP" to your
router's WAN IP.
3. Put the spa in the router's DMZ
Check it out :=)
>Have setup the ATA to use VOIPBuster, I can dial out successfully and
>the receiver can hear me. However, I cannot hear them.
>
>I have tried Port Forwarding on my router and enabled DMZ as suggested
>by Linksys. - Still doesn't work!!
use stun.voipbuster.com not sip.voipbuster.com
Me
Hi Peter
Your Suggestion Together with the following Instructions Worked for my
Linksys PAP2
On the sip page (advanced mode):
STUN Server: stun.fwdnet.net:3478
(you can use any STUN server, they are not provider specific.)
On the Line 1 (or 2) page:
Proxy: sip.voipbuster.com
Use Outbound Proxy: no
Outbound Proxy: (leave empty)
Register: yes
Display Name: (your voipbuster username)
User ID: (your voipbuster username)
Password: (your voipbuster password)
-- ras