Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Flexispeed saga
1 view
Skip to first unread message
david R
Dec 3, 2009, 10:16:00 AM12/3/09
to
I acquired a set of lathe castings from e bay which with help from
other members turned out to be the castings for a Simat Flexispeed.
Thanks especially to Don for the instructions. There is still some
paper on the slide ways so I presume it was a kit that never got built
and then lost the smaller bits. So any help in obtaining parts would
be much appreciated. It is easier to say what I have than what’s
missing; I have all castings, back gear gears, spindle and lead screw.
I will make the missing bits but any offers of bits or a full lathe in
a poor state will be gratefully received and paid for.
Dave
other members turned out to be the castings for a Simat Flexispeed.
Thanks especially to Don for the instructions. There is still some
paper on the slide ways so I presume it was a kit that never got built
and then lost the smaller bits. So any help in obtaining parts would
be much appreciated. It is easier to say what I have than what’s
missing; I have all castings, back gear gears, spindle and lead screw.
I will make the missing bits but any offers of bits or a full lathe in
a poor state will be gratefully received and paid for.
Dave
0 new messages