Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

TORX/T-Star screws for WOOD

0 views
Skip to first unread message

KS

unread,
Dec 8, 2009, 9:52:55 AM12/8/09
to
but 2 X 20 mm steel - not brass !

Do you know where I can get hold of 500 peaces for a reasenable price ?

TORX/T-Star would be best, but PoziDrive is acceptable,
(Sorry, I don't know the english term for this slice on tpo of the head of
the screw)

Best regards
KSor
Denmark

Bob Minchin

unread,
Dec 8, 2009, 10:31:19 AM12/8/09
to
UK Screws mainly use the imperial measurement system linked to head
diameter and length.

No 4 x 3/4" will have a head about 4.5 mm in diameter and overall length
of 19mm

Pozidrive head - http://tinyurl.com/yb5jkph any good? �1.14 per �200

Bob

Roger Woollett

unread,
Dec 8, 2009, 10:59:44 AM12/8/09
to
I think it will be difficult to get 20mm length with only 2mm diameter.

I have some No2. steel slotted woodscrews that are just over 2mm diameter
although it is a bit difficult to measure as they are tapered. Screwsline
have half inch (12.7mm) no 2 screws for �0.82 per 200 if that helps.

http://www.screwsline.co.uk/steel_slotted_wood_screws_csk.php


Roger Woollett

0 new messages