I would first check the output of the pump - at the pump. Replace the
pipe on the output with a piece of garden hose and time how long it
takes it to pump 4L when compared to how long it takes to pump 4L via
the tap. I had a similar problem at just one outlet and it turned out
to be nothing more than a kink in the pipe.
--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk
When was your filter last changed?
I removed the filter last year.................
Is the pressure low on both hot and cold water? If its just on the hot it
could be a non-return valve problem. We replaced ours earlier this year
on our Bailey Ranger. It hadn't had a bad life though - 12 years to fail.
--
David
Thanks for that.....will check