Having done that the next job is to clean the bridge and the nut, both of
which are plastic but have turned browny green on the surface. Neither seem
to respond to soap, water, alcohol or other solvents. Any ideas?
> .... and bridges. Seriously. I have been cleaning up a year old Spanish
Fit new ones?
Less hassle...
Light abrasive - fine wet'n'dry paper followed by T-Cut to bring up the
shine.
Steve.
>> Having done that the next job is to clean the bridge and the nut, both of
>> which are plastic but have turned browny green on the surface. Neither
>> seem to respond to soap, water, alcohol or other solvents. Any ideas?
>
> Fit new ones?
>
> Less hassle...
Bit drastic, Jim. Other possibles were sell the guitar and buy a new one or
give up playing, but in the end I went for the light sanding.
What did you use to dilute the white spirit ?
--
GS
reverse org.microhero@graham to reply
Just water about 2:1.. I'm not sure it was necessary, but I just wanted to
make sure that the gunk came off before the stain in the wood, which it did.
The tissue was only slightly damp but the results were quite remarkable. A
quick dab and wipe and 40 years of gunk were gone. Some lemon oil and it
looked like new. Mind you this is a cheapo guitar; I would be more careful
with my 2 other rosewood neck guitars.
Have you tried lighter-fluid/naphtha/Ronsonol?
Works wonders for cleaning gunk off all guitar parts.
George
You are Barry Scott and I claim my free years supply of Cillit Bang...
> Have you tried lighter-fluid/naphtha/Ronsonol?
> Works wonders for cleaning gunk off all guitar parts.
That and a match are recommended for cleaning banjos.
:)
I don't think this was finger "gunk", but just deteriorating plastic,
possibly some sort of surface algae. Came off with some scraping and
scratching.
P