uavdevboard

Hi UDB'ers, I have an updated version of the UDBmini board available now on octopilot.com. It

Hi, how are you! I'm trying to setup a plane with MP on my new laptop (windows 11) So, I've

Bill, See attached file Regards - John -----Original Message----- From: william premerlani <

Hello, how are you, I'm working on a new plane, a bixler 3 with UDB5 board. I'm making the

Thank Bill, It's good to "see" you around. I'm on a new setup, a bixler 3 plane so

Hi gang, I hope you're all doing well these days. I have some questions for any of you who fly

Bill, I have been working with the MatrixPilot on a UDB6mini. I need to add an external high-G

Hi UDB'ers, Working with Bill and Guy, we noticed that the LDO 5V regulator on the UDB5mini and

Pete, I am looking forward at installing my UDB on a jet assisted flying wing. It can reach up to 35

Hi Jack, To look into increasing the sensor read rate, you could start by searching for "SAMPLE

Hi Ben, Many thanks for your answer. I got all information that I need for the moment and I can start

Hello Ben The ICM-20689 datasheet telling that the max output rate can be 32KHz, however, 8kHz in

Hi Pete, Yes, the branch you point into is the right one. Please, pay attention to this code, it

Hi Roby, The family of dsPIC33 processors can produce high priority trap interrupts for the following

Hi Roby, Thank you for your very kind words. I had a lot of fun with this, and I am grateful that

Hi Oliver, I think I did not express myself well. Consider you transformed the accelerometer

In Austin Meyer's latest video about the new Vulkan Beta for X-Plane 11, he states that one of

Oliver, The ##s puzzled me when I first saw them a few years back; I did not know that this form of

Hi RIC, My fist reaction about the interest of rated at 333Hz the servos was to refer to the time

Thank you gfm, I will try it Oliver

Ohans, Before you start flying, you need to check the Frames Per Second (FPS) that X-Plane 10 is

Hi Roby, The objective given to my work is to guide the quadcopter as precisely as possible, aiming

Hi Bill, It really makes sense what you said. Thanks for clarifying. Is there any way I could test my

Hi Francois, Thanks for the information. Yes indeed, the LIDAR PWM output is difficult to interpret

Roby, I guess we have to define flight modes. You always have manual control. Fortunately, I saved my

I suppose that you could delete the mpu_spi flags conditions, and enable both modules always. Roby On

Hi Roby, Thanks for the question. Regarding the present version of compensation for GPS latency I

Yes, if NUM_ANALOG_INPUTS is set to 2, the A15 and A16 are set up to receive analog input. And by

We have a had a Return To Landing feature in MatrixPilot for many years. FYI: Here is a link to the

John, Flight Analayzer (flan.pyw) is a standard part of the MatrixPilot code base. Look under Tools/