Another engraved mirror
37 views
Skip to first unread message
smcameron
Jan 31, 2012, 11:28:06 PM1/31/12
to txrx...@googlegroups.com
Are you making a Tx/Rx "bat signal?"
-- steve
-- steve
stcredzero
Jan 31, 2012, 11:38:20 PM1/31/12
to Tx/Rx Labs
On Jan 31, 10:28 pm, smcameron <stephenmcame...@gmail.com> wrote:
> Are you making a Tx/Rx "bat signal?"
I don't think there's any point in signaling our battiness. I think
> Are you making a Tx/Rx "bat signal?"
it's mostly assumed.
Chris Holloway
Jan 31, 2012, 11:49:51 PM1/31/12
to txrx...@googlegroups.com, txrx...@googlegroups.com
It looks like your laser is really getting dialed in. Think you could cut my faceplates for me for my cutter? I'm still a bit away from having time to reassemble my laser and I'd like to get them cut. I have drawings and materials for them already.
On Jan 31, 2012, at 9:31 PM, Peter Kwangjun Suk <peter.kwa...@gmail.com> wrote:
>
>
>
>
>
> --Peter
>
> --
> There's neither heaven nor hell,
> save what we grant ourselves.
> There's neither fairness nor justice,
> save what we grant each other.
> <photo.JPG>
> --
> You received this message because you are subscribed to the Google Groups "Tx/Rx Labs" group.
> To post to this group, send email to txrx...@googlegroups.com.
> To unsubscribe from this group, send email to txrxlabs+u...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/txrxlabs?hl=en.
>
stcredzero
Jan 31, 2012, 11:57:13 PM1/31/12
to Tx/Rx Labs
On Jan 31, 10:49 pm, Chris Holloway <im.chrishollo...@gmail.com>
wrote:
BTW, anyone want to weld me one of these? (Maybe a bit shorter)
http://www.buildlog.net/forum/viewtopic.php?f=16&t=455&start=30#p3339
wrote:
> It looks like your laser is really getting dialed in. Think you could cut my faceplates for me for my cutter? I'm still a bit away from having time to reassemble my laser and I'd like to get them cut. I have drawings and materials for them already.
Shoa!
BTW, anyone want to weld me one of these? (Maybe a bit shorter)
http://www.buildlog.net/forum/viewtopic.php?f=16&t=455&start=30#p3339
Chris Holloway
Feb 1, 2012, 10:03:42 AM2/1/12
to txrx...@googlegroups.com
What are you using to control the table and what is your cam process? Need to know what formats you can use.
stcredzero
Feb 1, 2012, 7:31:16 PM2/1/12
to Tx/Rx Labs
On Feb 1, 9:03 am, Chris Holloway <im.chrishollo...@gmail.com> wrote:
> What are you using to control the table and what is your cam process? Need to know what formats you can use.
Right now I'm using the program that came with the laser cutter. It's
> What are you using to control the table and what is your cam process? Need to know what formats you can use.
called "LaserWork." Not badly done for Chinese software. There aren't
any Chinese characters you have to deal with for one. It seems to be
able to import everything.
Jeremy Van Grinsven
Feb 1, 2012, 7:43:58 PM2/1/12
to txrx...@googlegroups.com
It is known to work with dxf so that is your best bet. I didn't see anything about the laser kerf so it must just trace the lines.
stcredzero
Feb 2, 2012, 12:50:51 AM2/2/12
to Tx/Rx Labs
On Feb 1, 6:43 pm, Jeremy Van Grinsven <jv4...@gmail.com> wrote:
> It is known to work with dxf so that is your best bet. I didn't see
> anything about the laser kerf so it must just trace the lines.
In particular, don't send me SVG. I have to open that in another
> It is known to work with dxf so that is your best bet. I didn't see
> anything about the laser kerf so it must just trace the lines.
program and export to DXF.
Chris Holloway
Feb 2, 2012, 1:41:17 AM2/2/12
to txrx...@googlegroups.com
Ok, sounds good. I believe I have the drawings in dxf somewhere. Does the
laser cut inside, outside or down the middle on the lines? Have you
measured the width of the cut?
laser cut inside, outside or down the middle on the lines? Have you
measured the width of the cut?
--
Reply all
Reply to author
Forward
0 new messages