> On Sun, Sep 23, 2012 at 3:09 PM, Gregory Walker <gwal...@earthlink.net
> <mailto:gwal...@earthlink.net>> wrote:

>     David,

>     I am glad to hear we are ready to dig into the hardware. I will be
>     there Tuesday evening to help and will bring the 3rd box of hard disks.

>         Greg Walker

>     On 09/22/2012 03:23 PM, David Nielson wrote:
>>     Greg,

>>     I really appreciate that, and I have you down for $200 towards
>>     networking gear.

>>     For Tuesday, I'd like to focus on the gruntwork that needs to be
>>     done. There's going to be a lot of counting, moving, stacking,
>>     tracking components. We really don't have anything close to a
>>     count of what we have, and I think we need to do that before we do
>>     too much more with the software.

>>     David

>>     On Sat, Sep 22, 2012 at 11:24 AM, Gregory Walker
>>     <gwal...@earthlink.net <mailto:gwal...@earthlink.net>> wrote:

>>         David,

>>         I will pledge $200 to cover a box of cable and additional
>>         hardware. I trust I can get a receipt for tax purposes.
>>         I am in La Grange this weekend, as most weekends, so cannot
>>         help directly with the setup.
>>         I plan to be at the labs Tuesday. We can declare it a
>>         "Supercoputer Tuesday" since I can bring the stand-alone box.
>>         Or I will be glad to help setup if there will be work on that
>>         evening.

>>                Greg

>>         On 09/22/2012 09:17 AM, David Nielson wrote:

>>             Hi Greg,

>>             Thanks for doing that hard drive inventory. That's a big deal.

>>             I just posted a message to the group about the need for a
>>             wired network at the lab. Can I talk you into sponsoring
>>             one or two boxes of cable so we can get things set up?
>>             Right now a new 1000' spool of solid cat 6a for
>>             installation is $125, shipped. I want to make 8 runs at a
>>             time so we can avoid the mess we had at the old space. We
>>             will also need terminating hardware (keystone jacks,
>>             boxes, wall plates, etc.) so anything will help.

>>             Thanks again,
>>             David Nielson

>>         --
>>         You received this message because you are subscribed to the
>>         Google Groups "Tx/Rx Labs" group.
>>         To post to this group, send email to txrxlabs@googlegroups.com
>>         <mailto:txrxlabs@googlegroups.com>.
>>         To unsubscribe from this group, send email to
>>         txrxlabs+unsubscribe@googlegroups.com
>>         <mailto:txrxlabs%2Bunsubscribe@googlegroups.com>.
>>         For more options, visit this group at
>>         http://groups.google.com/group/txrxlabs?hl=en.

>>     --
>>     You received this message because you are subscribed to the Google
>>     Groups "Tx/Rx Labs" group.
>>     To post to this group, send email to txrxlabs@googlegroups.com
>>     <mailto:txrxlabs@googlegroups.com>.
>>     To unsubscribe from this group, send email to
>>     txrxlabs+unsubscribe@googlegroups.com
>>     <mailto:txrxlabs+unsubscribe@googlegroups.com>.
>>     For more options, visit this group at
>>     http://groups.google.com/group/txrxlabs?hl=en.

>     --
>     You received this message because you are subscribed to the Google
>     Groups "Tx/Rx Labs" group.
>     To post to this group, send email to txrxlabs@googlegroups.com
>     <mailto:txrxlabs@googlegroups.com>.
>     To unsubscribe from this group, send email to
>     txrxlabs+unsubscribe@googlegroups.com
>     <mailto:txrxlabs%2Bunsubscribe@googlegroups.com>.
>     For more options, visit this group at
>     http://groups.google.com/group/txrxlabs?hl=en.

> --
> You received this message because you are subscribed to the Google
> Groups "Tx/Rx Labs" group.
> To post to this group, send email to txrxlabs@googlegroups.com.
> To unsubscribe from this group, send email to
> txrxlabs+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/txrxlabs?hl=en.