It looks like your laser is really getting dialed in. Think you could cut my faceplates for me for my cutter? I'm still a bit away from having time to reassemble my laser and I'd like to get them cut. I have drawings and materials for them already.
On Jan 31, 2012, at 9:31 PM, Peter Kwangjun Suk <peter.kwangjun....@gmail.com> wrote:
> -- > There's neither heaven nor hell, > save what we grant ourselves. > There's neither fairness nor justice, > save what we grant each other. > <photo.JPG> > -- > You received this message because you are subscribed to the Google Groups "Tx/Rx Labs" group. > To post to this group, send email to txrxlabs@googlegroups.com. > To unsubscribe from this group, send email to txrxlabs+unsubscribe@googlegroups.com. > For more options, visit this group at http://groups.google.com/group/txrxlabs?hl=en.
On Jan 31, 10:49 pm, Chris Holloway <im.chrishollo...@gmail.com>
wrote:
> It looks like your laser is really getting dialed in. Think you could cut my faceplates for me for my cutter? I'm still a bit away from having time to reassemble my laser and I'd like to get them cut. I have drawings and materials for them already.
> On Jan 31, 10:49 pm, Chris Holloway <im.chrishollo...@gmail.com> > wrote: >> It looks like your laser is really getting dialed in. Think you could cut my faceplates for me for my cutter? I'm still a bit away from having time to reassemble my laser and I'd like to get them cut. I have drawings and materials for them already.
> -- > You received this message because you are subscribed to the Google Groups "Tx/Rx Labs" group. > To post to this group, send email to txrxlabs@googlegroups.com. > To unsubscribe from this group, send email to txrxlabs+unsubscribe@googlegroups.com. > For more options, visit this group at http://groups.google.com/group/txrxlabs?hl=en.
On Feb 1, 9:03 am, Chris Holloway <im.chrishollo...@gmail.com> wrote:
> What are you using to control the table and what is your cam process? Need to know what formats you can use.
Right now I'm using the program that came with the laser cutter. It's
called "LaserWork." Not badly done for Chinese software. There aren't
any Chinese characters you have to deal with for one. It seems to be
able to import everything.
It is known to work with dxf so that is your best bet. I didn't see anything about the laser kerf so it must just trace the lines. On Feb 1, 2012 6:31 PM, "stcredzero" <peter.kwangjun....@gmail.com> wrote:
> On Feb 1, 9:03 am, Chris Holloway <im.chrishollo...@gmail.com> wrote: > > What are you using to control the table and what is your cam process? > Need to know what formats you can use.
> Right now I'm using the program that came with the laser cutter. It's > called "LaserWork." Not badly done for Chinese software. There aren't > any Chinese characters you have to deal with for one. It seems to be > able to import everything.
> -- > You received this message because you are subscribed to the Google Groups > "Tx/Rx Labs" group. > To post to this group, send email to txrxlabs@googlegroups.com. > To unsubscribe from this group, send email to > txrxlabs+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/txrxlabs?hl=en.
Ok, sounds good. I believe I have the drawings in dxf somewhere. Does the laser cut inside, outside or down the middle on the lines? Have you measured the width of the cut?
-----Original Message----- From: txrxlabs@googlegroups.com [mailto:txrxlabs@googlegroups.com] On Behalf
Of stcredzero Sent: Wednesday, February 01, 2012 11:51 PM To: Tx/Rx Labs Subject: [TX/RX Labs] Re: Another engraved mirror
On Feb 1, 6:43 pm, Jeremy Van Grinsven <jv4...@gmail.com> wrote: > It is known to work with dxf so that is your best bet. I didn't see > anything about the laser kerf so it must just trace the lines.
In particular, don't send me SVG. I have to open that in another program and export to DXF.
-- You received this message because you are subscribed to the Google Groups "Tx/Rx Labs" group. To post to this group, send email to txrxlabs@googlegroups.com. To unsubscribe from this group, send email to txrxlabs+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/txrxlabs?hl=en.
