Team delta Tuesday night

greg southerland

unread,

Feb 17, 2013, 8:52:48 PM2/17/13

to txrx...@googlegroups.com

Well things are looking good for the delta . Today I saw the finished electronics board, very professional. I hope we can build something worthy of it. I have a axis built and installed looks great and bullet proof. All aluminum. It has a welded component I would like refine the design with no welding but its doable like it is. We will have to look for a laser company to cut 1/8" aluminum. Tuesday will move all three Axises. So you don't want to miss this meeting. I will work after work to get the other two installed.

Sent from my iPhone

greg southerland

unread,

Feb 18, 2013, 3:49:48 PM2/18/13

to txrx...@googlegroups.com

Will work after work today to try and get the other two Axises ready for tomorrow. I really want to see it move

Sent from my iPhone

On Feb 17, 2013, at 7:52 PM, "greg southerland" <greg...@hotmail.com> wrote:

> Well things are looking good for the delta . Today I saw the finished electronics board, very professional. I hope we can build something worthy of it. I have a axis built and installed looks great and bullet proof. All aluminum. It has a welded component I would like refine the design with no welding but its doable like it is. We will have to look for a laser company to cut 1/8" aluminum. Tuesday will move all three Axises. So you don't want to miss this meeting. I will work after work to get the other two installed.
>
> Sent from my iPhone
>

> --
> You received this message because you are subscribed to the Google Groups "Tx/Rx Labs" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to txrxlabs+u...@googlegroups.com.
> To post to this group, send email to txrx...@googlegroups.com.
> Visit this group at http://groups.google.com/group/txrxlabs?hl=en.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>

greg southerland

unread,

Feb 18, 2013, 5:38:45 PM2/18/13

to txrx...@googlegroups.com

Can't make it tonight not feeling well will come in early tomorrow to finish up

Sent from my iPhone

On Feb 17, 2013, at 7:52 PM, "greg southerland" <greg...@hotmail.com> wrote:

> Well things are looking good for the delta . Today I saw the finished electronics board, very professional. I hope we can build something worthy of it. I have a axis built and installed looks great and bullet proof. All aluminum. It has a welded component I would like refine the design with no welding but its doable like it is. We will have to look for a laser company to cut 1/8" aluminum. Tuesday will move all three Axises. So you don't want to miss this meeting. I will work after work to get the other two installed.
>
> Sent from my iPhone
>

Mark Sullivan

unread,

Feb 19, 2013, 5:16:27 PM2/19/13

to txrx...@googlegroups.com

Just to be clear, we're postponing Team Delta until tomorrow, Wednesday. Right?

Mike

unread,

Feb 19, 2013, 5:47:40 PM2/19/13

to txrx...@googlegroups.com

Mark,

Looks to me like Greg sent out that email yesterday afternoon. I'd have thought we were still on for tonight.

greg southerland

unread,

Feb 19, 2013, 7:14:59 PM2/19/13

to txrx...@googlegroups.com

On the way traffic

Sent from my iPhone

texastiger

unread,

Feb 20, 2013, 9:14:52 AM2/20/13

to txrx...@googlegroups.com

Check with Bill Swann on the laser cutting. He used an outfit that had water jets and possibly lasers.

Reply all

Reply to author

Forward