toasted circuits lightuino

Hello everebody, i have a toasted circuits lightuino 5.0 i would like a program to do this: with 17

Hi Andrew, I decided to take a stab at optimizing the code myself and discovered that the fastSetBy32

try bracketing the clear and set pair with cli() and sei() to temporarily turn off interrupts. If

Hi Andrew and Lightuino group First of all a Merry Christmas and a happy new year! In the seasons

Help me Andrew!! please! first achievement ... but I still fails :-( http://youtu.be/O62DeCJhWBk my

Hi Seppo: Could you share with me and maybe others how you get CA-42 cable working with Win7 Box,

Hi Chris, Maybe this sketch will help you. I eliminated all the extraneous functionality and am just

Serial.end() seamed to do the trick. On Tuesday, August 14, 2012 7:51:46 AM UTC-4, Joel wrote: Hi

Thanks again Andrew! I am now using a +12V from computer power supply and I adjusted the center

Andrew, Thank you!! I can't wait to get back to work on this project! I was kinda stuck there on

Thank You Nicolas, Hi Andrew, Heres where I'm at. I've read through Beginning Arduino and the

Hi Paul, Yes that's exactly what you'd do. I actually have a board just now in house that

Yes, this was the problem, thanks! On Apr 9, 9:23 am, "G. Andrew Stone" <g.andrew.st...@

Thanks Andrew, I didn't have the board connect when I tested the 3 LEDs and 12v, so I only killed

Wow, great information. Thanks once again. I'll test it tonight directly from the 12V PSU. I was

Great! I'm glad they are really bright. Please hook a multimeter up in series with the LED on the

No problem on the delay, thanks for the reply. When I try to click on the file and install it, it

Nope, the board will always use the jack if its available. The board will lose power momentarily when

Its here: http://code.google.com/p/arduino-m5451-current-driver/source/browse/trunk/latest/apps/

Hmm... your physical setup looks good (as far as I can see). But please make sure you are getting 5v

Hi Mauricio, The spx2954 regulator is rated to 125C and with a 12v input I have seen it get up to

As some of you have seen, I made a quad channel high power LED driver add-on for the Lightuino boards

It may be an issue with the USB conflicting with the ethernet over the SPI bus. If so, you can try a

Hi Jeremy, Thanks for producing this table! Pin 0 and 1 are the serial port on the Arduino, as well

Thanks Andrew, you were a great resource for us! I actually have one more link to share with this

Hi again, yes, these are homemade matrix, I builded some for test different kinds of LEDs for the

Hi Mauricio, Nice PCB! Is that homemade? But first let's verify it. I verify my matrix by turning

Hi Paul, I've been following your blog and enjoying it! I'm glad that you guys are off to the

Hi Mauricio, Imagine an LED matrix with rows and columns. Let's say that the rows connect to the

Nice! If you put up some higher resolution photos (or email them to me, you have my address) I'd