Groups
Conversations
All groups and messages
Send feedback to Google
Help
Training
Sign in
Groups
TakkTile
Conversations
About
TakkTile
Contact owners and managers
1–24 of 24
Mark all as read
Report group
0 selected
양민규
,
Radu Corcodel
2
6/12/19
hello I am a user for takkstrip1 and I have some questions
Hello, It looks like you did not set the hardware address on each strip. On the back side of the
unread,
hello I am a user for takkstrip1 and I have some questions
Hello, It looks like you did not set the hardware address on each strip. On the back side of the
6/12/19
Michael Lowry
6/12/19
Takktile and UHMWPE
I have a question regarding a potential use of this platform. Have you experimented with stiffer
unread,
Takktile and UHMWPE
I have a question regarding a potential use of this platform. Have you experimented with stiffer
6/12/19
14660...@qq.com
9/13/18
No module named takktile_ros.msg
I run the code:rosrun takktile_ros takktile_node.py following the tutorials. However , it always make
unread,
No module named takktile_ros.msg
I run the code:rosrun takktile_ros takktile_node.py following the tutorials. However , it always make
9/13/18
irad....@uconn.edu
,
Chris
2
10/24/17
Trouble with using multiple TakkStrips and USB Error
Hello and greetings from Germany. If have the very same Problem. What i have found out is that the
unread,
Trouble with using multiple TakkStrips and USB Error
Hello and greetings from Germany. If have the very same Problem. What i have found out is that the
10/24/17
Marwa Kamel
7/20/17
schematic diagram of the takktile kit for robotiq
How can i fix this damage?
unread,
schematic diagram of the takktile kit for robotiq
How can i fix this damage?
7/20/17
Janelle Theron
9/12/15
Attiny microcontroller for chip select
Is the microcontroller used only for the chip select? I have tried to connect the takkstrip using the
unread,
Attiny microcontroller for chip select
Is the microcontroller used only for the chip select? I have tried to connect the takkstrip using the
9/12/15
shin
, …
liveinthemoment0Y0
3
9/8/15
Connectivity Problems with TakkArray
Hi, I am having the same issue as you, could you please tell me how you fixed it? What version of
unread,
Connectivity Problems with TakkArray
Hi, I am having the same issue as you, could you please tell me how you fixed it? What version of
9/8/15
Janelle Theron
8/27/15
Cant seem to read sensors at all
I have cut the sensors off the takkstrip and am using 4 of them. I have then soldered 4 of the
unread,
Cant seem to read sensors at all
I have cut the sensors off the takkstrip and am using 4 of them. I have then soldered 4 of the
8/27/15
Alejandro Díaz Fontalva
7/21/15
Pressure values works in an inverse way
Hi, I am trying to read the pressure in the different Takktile sensors and write a PWM in a vibration
unread,
Pressure values works in an inverse way
Hi, I am trying to read the pressure in the different Takktile sensors and write a PWM in a vibration
7/21/15
Emil Hyttinen
6/25/15
Increased sensor values without decreased pressure
Hi, We're using the TakkTile Kit for the Robotiq Adaptive Gripper. I have collected data for
unread,
Increased sensor values without decreased pressure
Hi, We're using the TakkTile Kit for the Robotiq Adaptive Gripper. I have collected data for
6/25/15
Jonathan Carvalheiro
,
Yaroslav Tenzer
2
4/8/15
Takkstrip connection
Hello Jonathan, Sorry to hear that you are having problems connecting the TakkStrip. I wonder if the
unread,
Takkstrip connection
Hello Jonathan, Sorry to hear that you are having problems connecting the TakkStrip. I wonder if the
4/8/15
Alex Burka
,
Yaroslav Tenzer
3
2/24/15
TakkFast with other sensors
Sounds good. Thanks for getting back to me! Alex El lunes, 23 de febrero de 2015, 23:44:09 (UTC-5),
unread,
TakkFast with other sensors
Sounds good. Thanks for getting back to me! Alex El lunes, 23 de febrero de 2015, 23:44:09 (UTC-5),
2/24/15
Paul Jurczak
,
Yaroslav Tenzer
2
2/23/15
Using enclosed air volume instead of rubber.
Hello Paul, Something similar to the described was carried out here: Zillich, M. & Feiten, W. (
unread,
Using enclosed air volume instead of rubber.
Hello Paul, Something similar to the described was carried out here: Zillich, M. & Feiten, W. (
2/23/15
dmo...@bitfurnace.com
,
Leif Jentoft
4
9/22/13
TakkStrip behaving strangely
Glad to hear, and we will keep you posted if we learn anything more about the issue. Happy building!
unread,
TakkStrip behaving strangely
Glad to hear, and we will keep you posted if we learn anything more about the issue. Happy building!
9/22/13
Raymond Ma
,
Leif Jentoft
2
9/9/13
Takktile-Finger Example
Cool videos -- thanks for the feedback, and for the build guide! -- Leif Jentoft PhD Candidate |
unread,
Takktile-Finger Example
Cool videos -- thanks for the feedback, and for the build guide! -- Leif Jentoft PhD Candidate |
9/9/13
Raymond Ma
, …
Raymond Ma
5
9/2/13
Implementing Takktile into Fingers
- I've had issues with 30AWG wire breaking on me, especially single-strand. I understand the
unread,
Implementing Takktile into Fingers
- I've had issues with 30AWG wire breaking on me, especially single-strand. I understand the
9/2/13
Raymond Ma
, …
Yaroslav Tenzer
4
8/6/13
More insight into custom i2c protocol?
Hey Ray, The first draft of the explanation for the I2C protocol used by TakkTile is online. Have a
unread,
More insight into custom i2c protocol?
Hey Ray, The first draft of the explanation for the I2C protocol used by TakkTile is online. Have a
8/6/13
Angus Thomson
, …
Yaroslav Tenzer
4
4/22/13
Force range?
Hey Angus, Have we replied your question ? Not sure. Sorry about it. It is possible to vary the
unread,
Force range?
Hey Angus, Have we replied your question ? Not sure. Sorry about it. It is possible to vary the
4/22/13
davidot...@gmail.com
,
Leif Jentoft
3
1/16/13
temperature sensing
Thank you for the quick reply. I was wondering if one could use this for both thermal and pressure
unread,
temperature sensing
Thank you for the quick reply. I was wondering if one could use this for both thermal and pressure
1/16/13
Hao
, …
Leif Jentoft
9
7/11/12
what does "-30 mmHg"means?
Problems with the rubber curing are usually a result of an improper mix ratio -- if there's too
unread,
what does "-30 mmHg"means?
Problems with the rubber curing are usually a result of an improper mix ratio -- if there's too
7/11/12
Hao
,
Leif Jentoft
3
6/15/12
Why choose ATxmegaA4U?
Cool, I'll go with SOIC. And I think I'll change ATxmega to something more common, for easier
unread,
Why choose ATxmegaA4U?
Cool, I'll go with SOIC. And I think I'll change ATxmega to something more common, for easier
6/15/12
Hao
, …
Yaroslav Tenzer
5
6/8/12
How about use takktile as a single sensor, rather than array
thank you, Yaroslav and Leif. I'll try to make some, and see if I can contribute to the project.
unread,
How about use takktile as a single sensor, rather than array
thank you, Yaroslav and Leif. I'll try to make some, and see if I can contribute to the project.
6/8/12
Hao Zhang
, …
Leif Jentoft
4
6/5/12
Problem with eagle file
Great to hear that worked! We will update the documentation to match. On Jun 5, 2012 12:19 AM, "
unread,
Problem with eagle file
Great to hear that worked! We will update the documentation to match. On Jun 5, 2012 12:19 AM, "
6/5/12
Hao Zhang
, …
Hao Zhang
3
5/29/12
Where do you guys get the MPL115A2 chip?
Thank you, Leif :) On Mon, May 28, 2012 at 7:46 PM, Leif Jentoft <ljen...@seas.harvard.edu>
unread,
Where do you guys get the MPL115A2 chip?
Thank you, Leif :) On Mon, May 28, 2012 at 7:46 PM, Leif Jentoft <ljen...@seas.harvard.edu>
5/29/12