> pp3dp do not sell coloured filament.  Are you talking about the stuff from
> Bruce?

> PS : Do you have the "AUS" version of the Up! software?  Buzz me via
> E-mail...

> On Monday, 6 August 2012 21:12:13 UTC+10, Adriaan Swanepoel wrote:

> > What is the melting point? I have found that even the colored filament
> > from pp3dp has a melting point lower than the natural color. This makes
> > removing rafts difficult and prints higher then 0.25 very droopy. I will
> > gladly pay $50 for colored filament that has similar properties as the
> > natural.

> > On 06/08/2012, at 8:59 PM, chris bate <thejollygrimrea...@gmail.com>
> > wrote:

> > I'm getting a sample reel of the 1.75 stuff and i've got some of the 3mm
> > abs but it's in rod form, i can bring that into the space on sunday if
> > anyone wants to see it

> > On Mon, Aug 6, 2012 at 8:57 PM, Madox <madox....@gmail.com> wrote:

> >> the pp3dp plastic is more than that (I have them for $50/roll if anyone
> >> is interested) and is well worth the money.

> >> The only downside I see is that there's a risk,almost everyone says their
> >> plastic is good and virgin but I've not seen it except in the pp3dp and
> >> stratasys plastics [both which you have to pay a premium].

> >> On Monday, 6 August 2012 20:37:55 UTC+10, chris bate wrote:

> >>> hi all,

> >>> i need to get some feed back in regards to filament,

> >>> i have a supplier that can produce filament in the 1.75mm and 3mm but
> >>> from virgin granule not the recycled stuff the Chinese use,
> >>> it comes with a guarantee that it is consistently round, but also
> >>> throughly dried out, the downside is that the cost on it s about $50 a kilo
> >>> and it comes as 2kg reels,

> >>> anyone got any thoughts?
> >>> if it were made availble would people be prepared to pay $50/kg

> >>>  --
> >> You received this message because you are subscribed to the Google Groups
> >> "Robots & Dinosaurs" group.
> >> To view this discussion on the web visit
> >>https://groups.google.com/d/msg/sydney-hackspace/-/kYb0wCm8FmgJ.

> >> To post to this group, send email to sydney-hackspace@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> sydney-hackspace+unsubscribe@googlegroups.com.
> >> For more options, visit this group at
> >>http://groups.google.com/group/sydney-hackspace?hl=en.

> >  --
> > You received this message because you are subscribed to the Google Groups
> > "Robots & Dinosaurs" group.
> > To post to this group, send email to sydney-hackspace@googlegroups.com.
> > To unsubscribe from this group, send email to
> > sydney-hackspace+unsubscribe@googlegroups.com.
> > For more options, visit this group at
> >http://groups.google.com/group/sydney-hackspace?hl=en.