Gmail Calendar Documents Reader Web more »
Recently Visited Groups | Help | Sign in
Google Groups Home
sol.lists.freebsd.sparc.digest
+ new post
About this group
Subscribe to this group
This is a Usenet group - learn more
freebsd-sparc-digest V5 #253
Options
There are currently too many topics in this group that display first. To make this topic appear first, remove this option from another topic.
There was an error processing your request. Please try again.
flag
   1 message - Collapse all  -  Translate all to Translated (View all originals)
The group you are posting to is a Usenet group. Messages posted to this group will make your email address visible to anyone on the Internet.
Your reply message has not been sent.
Your post was successful
 
From:
To:
Cc:
Followup To:
Add Cc | Add Followup-to | Edit Subject
Subject:
Validation:
For verification purposes please type the characters you see in the picture below or the numbers you hear by clicking the accessibility icon. Listen and type the numbers you hear
 
owner-freebsd-sparc-digest  
View profile  
 More options Mar 14 2003, 3:16 pm
Newsgroups: sol.lists.freebsd.sparc.digest
From: owner-freebsd-sparc-dig...@FreeBSD.ORG
Date: 14 Mar 2003 20:16:04 +0000
Local: Fri, Mar 14 2003 3:16 pm
Subject: freebsd-sparc-digest V5 #253
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author

freebsd-sparc-digest      Friday, March 14 2003      Volume 05 : Number 253

In this issue:
Re: Sparc64 and standard PCI devices
Re: Sparc64 and standard PCI devices
Re: Sparc64 and standard PCI devices
sparc64 tinderbox failure
300 Modelos de Cartas comerciais, avisos, convites, propostas, etc.
Re: Sparc64 and standard PCI devices
is this still not ported?

----------------------------------------------------------------------

Date: Thu, 13 Mar 2003 14:53:27 -0500
From: Jake Burkholder <j...@locore.ca>
Subject: Re: Sparc64 and standard PCI devices

Apparently, On Thu, Mar 13, 2003 at 10:36:41AM +0200,
        Marian Dobre said words to the effect of;

Its not a problem with the drivers, the pci code is not assigning the right
interrupts.  If they're not already there, add options PSYCHO_DEBUG and
options OFW_PCI_DEBUG to your kernel config and send me the full dmesg.
If you try to ifconfig the interfaces with these options you may get a
stray interrupt message on the console as well, I need to know the numbers
that are reported.

Jake

------------------------------

Date: Thu, 13 Mar 2003 23:13:09 +0200
From: Marian Dobre <m...@onix.ro>
Subject: Re: Sparc64 and standard PCI devices

Hey Jake,

Here's the dmesg output. Please let me know if there's more info you need.

Marian

stray vector interrupt 2029
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Thu Mar 13 09:19:08 CET 2003
     r...@freebsd.onix.ro:/usr/obj/usr/src/sys/CUSTOM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0430000.
Timecounter "tick"  frequency 248000000 Hz
cpu0: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
Model: SUNW,Ultra-4
cpu1: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
cpu2: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
cpu3: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Allocating major#253 to "net"
Allocating major#252 to "pci"
nexus0: <OpenFirmware Nexus device>
nexus0: <associations>, type (unknown) (no driver attached)
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
device 0/1/0: latency timer 10 -> 82
pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 0)
device 0/1/1: latency timer 10 -> 82
pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0)
device 0/3/0: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0)
device 0/2/0: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/2/0 to 38 (preset was 0)
pci0: <PCI bus> on pcib0
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem
0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
ebus0: <auxio> addr
0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a0 03,0x1400728000-0x1400728003,0x1400726000-0x1400726003
(no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 2034,2021 (no driver
attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr
0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043 cb
irq 2018 (no driver attached)
ebus0: <fdthree> addr
0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023 f7
irq 2023 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 8090c976
ebus0: <flashprom> addr
0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,envctrl> addr 0x1400600000-0x1400600003 irq 2021,2024 (no
driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff irq 33 at device 1.1
on pci0
hme0: Ethernet address: 08:00:20:90:c9:76
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff irq 38
at device 2.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff irq 32
at device 3.0 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0
pci1: <PCI bus> on pcib1
nexus0: <mc>, type memory-controller (no driver attached)
pcib2: <U2P UPA-PCI bridge> on nexus0
pcib2: Psycho, impl 0, version 4, ign 0x100
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
device 2/2/0: latency timer 8 -> 82
pcib2: ofw_pci_init: mapping intr for 2/2/0 to 1 (preset was 0)
pci2: <PCI bus> on pcib2
pci2: <network, ethernet> at device 2.0 (no driver attached)
pcib3: <U2P UPA-PCI bridge> on nexus0
pcib3: Psycho, impl 0, version 4, ign 0x100
pci3: <PCI bus> on pcib3
pcib4: <U2P UPA-PCI bridge> on nexus0
pcib4: Psycho, impl 0, version 4, ign 0x180
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
device 4/2/0: latency timer 32 -> 264
pcib4: ofw_pci_init: mapping intr for 4/2/0 to 1 (preset was 1)
device 4/4/0: latency timer 8 -> 66
pcib4: ofw_pci_init: mapping intr for 4/4/0 to 1 (preset was 1)
pci4: <PCI bus> on pcib4
pci4: <network, ethernet> at device 2.0 (no driver attached)
pci4: <display, VGA> at device 4.0 (no driver attached)
pcib5: <U2P UPA-PCI bridge> on nexus0
pcib5: Psycho, impl 0, version 4, ign 0x180
pci5: <PCI bus> on pcib5
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
Allocating major#251 to "devstat"
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
da0 at sym1 bus 0 target 0 lun 0
da0: <SEAGATE ST336706LC 0108> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
da1 at sym1 bus 0 target 1 lun 0
da1: <SEAGATE ST336706LC 0108> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da1: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
cd0 at sym0 bus 0 target 6 lun 0
cd0: <PIONEER CD-ROM DR-124X 1.00> Removable CD-ROM SCSI-2 device
cd0: 4.629MB/s transfers (4.629MHz, offset 8)
cd0: cd present [161606 x 2048 byte records]
Mounting root from ufs:/dev/da0a
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x400-0x47f mem
0x2000-0x207f irq 1 at device 2.0 on pci2
xl0: reset didn't complete
xl0: Ethernet address: 00:04:75:cf:90:2a
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: watchdog timeout
xl0: reset didn't complete
xl0: watchdog timeout
xl0: reset didn't complete
rl0: <RealTek 8139 10/100BaseTX> port 0x400-0x4ff mem 0x2000-0x20ff irq
1 at device 2.0 on pci4
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 00:00:b4:c0:db:b9
miibus2: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus2
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: watchdog timeout
rl0: watchdog timeout
  60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining...
done
stray vector interrupt 2029
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #6: Thu Mar 13 22:44:54 CET 2003
     r...@freebsd.onix.ro:/usr/obj/usr/src/sys/CUSTOM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0430000.
Timecounter "tick"  frequency 248000000 Hz
cpu0: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
Model: SUNW,Ultra-4
cpu1: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
cpu2: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
cpu3: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Allocating major#253 to "net"
Allocating major#252 to "pci"
nexus0: <OpenFirmware Nexus device>
nexus0: <associations>, type (unknown) (no driver attached)
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
pcib0: intr map (pci) 0: 0x7c0
pcib0: intr map (pci) 1: 0x7c4
pcib0: intr map (pci) 2: 0x7d0
pcib0: intr map (pci) 3: 0x7d4
pcib0: intr map (pci) 4: 0x800007d0
pcib0: intr map (pci) 5: 0x800007d4
pcib0: intr map (pci) 6: 0x7d8
pcib0: intr map (pci) 7: 0x7dc
pcib0: intr map (obio) 0: 0x7e0, clr: 0x1800
pcib0: intr map (obio) 1: 0x7e1, clr: 0x1808
pcib0: intr map (obio) 2: 0x7e2, clr: 0x1810
pcib0: intr map (obio) 3: 0x7e3, clr: 0x1818
pcib0: intr map (obio) 4: 0x7e4, clr: 0x1820
pcib0: intr map (obio) 5: 0x800007e5, clr: 0x1828
pcib0: intr map (obio) 6: 0x7e6, clr: 0x1830
pcib0: intr map (obio) 7: 0x7e7, clr: 0x1838
pcib0: intr map (obio) 8: 0x7e8, clr: 0x1840
pcib0: intr map (obio) 9: 0x7e9, clr: 0x1848
pcib0: intr map (obio) 10: 0x7ea, clr: 0x1850
pcib0: intr map (obio) 11: 0x7eb, clr: 0x1858
psycho at 0/0/0: setting bus #s to 0/0/0
device 0/1/0: latency timer 10 -> 82
pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 0)
device 0/1/1: latency timer 10 -> 82
pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0)
device 0/3/0: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0)
device 0/2/0: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/2/0 to 38 (preset was 0)
pci0: <PCI bus> on pcib0
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem
0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
ebus0: <auxio> addr
0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a0 03,0x1400728000-0x1400728003,0x1400726000-0x1400726003
(no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 2034,2021 (no driver
attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr
0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043 cb
irq 2018 (no driver attached)
ebus0: <fdthree> addr
0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023 f7
irq 2023 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 8090c976
ebus0: <flashprom> addr
0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,envctrl> addr 0x1400600000-0x1400600003 irq 2021,2024 (no
driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff irq 33 at device 1.1
on pci0
hme0: Ethernet address: 08:00:20:90:c9:76
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0: psycho_setup_intr: INO 33, map 0x1008, clr 0x1808
sym0: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff irq 38
at device 2.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib0: psycho_setup_intr: INO 38, map 0x1030, clr 0x1830
sym1: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff irq 32
at device 3.0 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib0: psycho_setup_intr: INO 32, map 0x1000, clr 0x1800
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0
pcib1: intr map (pci) 0: 0x800007c0
pcib1: intr map (pci) 1: 0x800007c4
pcib1: intr map (pci) 2: 0x800007d0
pcib1: intr map (pci) 3: 0x800007d4
pcib1: intr map (pci) 4: 0x800007d0
pcib1: intr map (pci) 5: 0x800007d4
pcib1: intr map (pci) 6: 0x800007d8
pcib1: intr map (pci) 7: 0x7dc
pcib1: intr map (obio) 0: 0x800007e0, clr: 0x1800
pcib1: intr map (obio) 1: 0x800007e1, clr: 0x1808
pcib1: intr map (obio) 2: 0x800007e2, clr: 0x1810
pcib1: intr map (obio) 3: 0x800007e3, clr: 0x1818
pcib1: intr map (obio) 4: 0x800007e4, clr: 0x1820
pcib1: intr map (obio) 5: 0x800007e5, clr: 0x1828
pcib1: intr map (obio) 6: 0x800007e6, clr: 0x1830
pcib1: intr map (obio) 7: 0x800007e7, clr: 0x1838
pcib1: intr map (obio) 8: 0x800007e8, clr: 0x1840
pcib1: intr map (obio) 9: 0x800007e9, clr: 0x1848
pcib1: intr map (obio) 10: 0x800007ea, clr: 0x1850
pcib1: intr map (obio) 11: 0x800007eb, clr: 0x1858
psycho at 128/0/0: setting bus #s to 128/1/1
pci1: <PCI bus> on pcib1
nexus0: <mc>, type memory-controller (no driver attached)
pcib2: <U2P UPA-PCI bridge> on nexus0
pcib2: Psycho, impl 0, version 4, ign 0x100
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
pcib2: intr map (pci) 0: 0x100
pcib2: intr map (pci) 1: 0x104
pcib2: intr map (pci) 2: 0x110
pcib2: intr map (pci) 3: 0x114
pcib2: intr map (pci) 4: 0x80000110
pcib2: intr map (pci) 5: 0x80000114
pcib2: intr map (pci) 6: 0x118
pcib2: intr map (pci) 7: 0x11c
pcib2: intr map (obio) 0: 0x120, clr: 0x1800
pcib2: intr map (obio) 1: 0x121, clr: 0x1808
pcib2: intr map (obio) 2: 0x122, clr: 0x1810
pcib2: intr map (obio) 3: 0x123, clr: 0x1818
pcib2: intr map (obio) 4: 0x124, clr: 0x1820
pcib2: intr map (obio) 5: 0x80000125, clr: 0x1828
pcib2: intr map (obio) 6: 0x126, clr: 0x1830
pcib2: intr map (obio) 7: 0x127, clr: 0x1838
pcib2: intr map (obio) 8: 0x128, clr: 0x1840
pcib2: intr map (obio) 9: 0x129, clr: 0x1848
pcib2: intr map (obio) 10: 0x12a, clr: 0x1850
pcib2: intr map (obio) 11: 0x12b, clr: 0x1858
psycho at 0/0/0: setting bus #s to 0/2/2
device 2/2/0: latency timer 8 -> 82
pcib2: ofw_pci_init: mapping intr for 2/2/0 to 1 (preset was 0)
pci2: <PCI bus> on pcib2
pci2: <network, ethernet> at device 2.0 (no driver attached)
pcib3: <U2P UPA-PCI bridge> on nexus0
pcib3: Psycho, impl 0, version 4, ign 0x100
pcib3: intr map (pci) 0: 0x80000100
pcib3: intr map (pci) 1: 0x80000104
pcib3: intr map (pci) 2: 0x80000110
pcib3: intr map (pci) 3: 0x80000114
pcib3: intr map (pci) 4: 0x80000110
pcib3: intr map (pci) 5: 0x80000114
pcib3: intr map (pci) 6: 0x80000118
pcib3: intr map (pci) 7: 0x8000011c
pcib3: intr map (obio) 0: 0x80000120, clr: 0x1800
pcib3: intr map (obio) 1: 0x80000121, clr: 0x1808
pcib3: intr map (obio) 2: 0x80000122, clr: 0x1810
pcib3: intr map (obio) 3: 0x80000123, clr: 0x1818
pcib3: intr map (obio) 4: 0x80000124, clr: 0x1820
pcib3: intr map (obio) 5: 0x80000125, clr: 0x1828
pcib3: intr map (obio) 6: 0x80000126, clr: 0x1830
pcib3: intr map (obio) 7: 0x80000127, clr: 0x1838
pcib3: intr map (obio) 8: 0x80000128, clr: 0x1840
pcib3: intr map (obio) 9: 0x80000129, clr: 0x1848
pcib3: intr map (obio) 10: 0x8000012a, clr: 0x1850
pcib3: intr map (obio) 11: 0x8000012b, clr: 0x1858
psycho at 128/0/0: setting bus #s to 128/3/3
pci3: <PCI bus> on pcib3
pcib4: <U2P UPA-PCI bridge> on nexus0
pcib4: Psycho, impl 0, version 4, ign 0x180
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
pcib4: intr map (pci) 0: 0x180
pcib4: intr map (pci) 1: 0x184
pcib4: intr map (pci) 2: 0x190
pcib4: intr map (pci) 3: 0x194
pcib4: intr map (pci) 4: 0x80000190
pcib4: intr map (pci) 5: 0x80000194
pcib4: intr map (pci) 6: 0x198
pcib4: intr map (pci) 7: 0x19c
pcib4: intr map (obio) 0: 0x1a0, clr: 0x1800
pcib4: intr map (obio) 1: 0x1a1, clr: 0x1808
pcib4: intr map (obio) 2: 0x1a2, clr: 0x1810
pcib4: intr map (obio) 3: 0x1a3, clr: 0x1818
pcib4: intr map (obio) 4: 0x1a4, clr: 0x1820
pcib4: intr map (obio) 5: 0x800001a5, clr: 0x1828
pcib4: intr map (obio) 6: 0x1a6, clr: 0x1830
pcib4: intr map (obio) 7: 0x1a7, clr: 0x1838
pcib4: intr map (obio) 8: 0x1a8, clr: 0x1840
pcib4: intr map (obio) 9: 0x1a9, clr: 0x1848
pcib4: intr map (obio) 10: 0x1aa, clr: 0x1850
pcib4: intr map (obio) 11: 0x1ab, clr: 0x1858
psycho at 0/0/0: setting bus #s to 0/4/4
device 4/2/0: latency timer 32 -> 264
pcib4: ofw_pci_init: mapping intr for 4/2/0 to 1 (preset was 1)
device 4/4/0: latency timer 8 -> 66
pcib4: ofw_pci_init: mapping intr for 4/4/0 to 1 (preset was 1)
pci4: <PCI bus> on pcib4
pci4: <network, ethernet> at device 2.0 (no driver attached)
pci4: <display, VGA> at device 4.0 (no driver attached)
pcib5: <U2P UPA-PCI bridge> on nexus0
pcib5: Psycho, impl 0, version 4, ign 0x180
pcib5: intr map (pci) 0: 0x80000180
pcib5: intr map (pci) 1: 0x80000184
pcib5: intr map (pci) 2: 0x80000190
pcib5: intr map (pci) 3: 0x80000194
pcib5: intr map (pci) 4: 0x80000190
pcib5: intr map (pci) 5: 0x80000194
pcib5: intr map (pci) 6: 0x80000198
pcib5: intr map (pci) 7: 0x8000019c
pcib5: intr map (obio) 0: 0x800001a0, clr: 0x1800
pcib5: intr map (obio) 1: 0x800001a1, clr: 0x1808
pcib5: intr map (obio) 2: 0x800001a2, clr: 0x1810
pcib5: intr map (obio) 3: 0x800001a3, clr: 0x1818
pcib5: intr map (obio) 4: 0x800001a4, clr: 0x1820
pcib5: intr map (obio) 5: 0x800001a5, clr: 0x1828
pcib5: intr map (obio) 6: 0x800001a6, clr: 0x1830
pcib5: intr map (obio) 7: 0x800001a7, clr: 0x1838
pcib5: intr map (obio) 8: 0x800001a8, clr: 0x1840
pcib5: intr map (obio) 9: 0x800001a9, clr: 0x1848
pcib5: intr map (obio) 10: 0x800001aa, clr: 0x1850
pcib5: intr map (obio) 11: 0x800001ab, clr: 0x1858
psycho at 128/0/0: setting bus #s to 128/5/5
pci5: <PCI bus> on pcib5
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
Allocating major#251 to "devstat"
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
cd0 at sym0 bus 0 target 6 lun 0
cd0: <PIONEER CD-ROM DR-124X 1.00> Removable CD-ROM SCSI-2 device
cd0: 4.629MB/s transfers (4.629MHz, offset 8)
cd0: cd present [161606 x 2048 byte records]
da0 at sym1 bus 0 target 0 lun 0
da0: <SEAGATE ST336706LC 0108> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
da1 at sym1 bus 0 target 1 lun 0
da1: <SEAGATE ST336706LC 0108> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da1: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0a
rl0: <RealTek 8139 10/100BaseTX> port 0x400-0x4ff mem 0x2000-0x20ff irq
1 at device 2.0 on pci4
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 00:00:b4:c0:db:b9
pcib4: psycho_setup_intr: INO 1, map 0xc00, clr 0x1408
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x400-0x47f mem
0x2000-0x207f irq 1 at device 2.0 on pci2
pcib2: psycho_setup_intr: INO 1, map 0xc00, clr 0x1408
xl0: reset didn't complete
xl0: Ethernet address: 00:04:75:cf:90:2a
miibus2: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

------------------------------

Date: Thu, 13 Mar 2003 19:10:49 -0500
From: Jake Burkholder <j...@locore.ca>
Subject: Re: Sparc64 and standard PCI devices

Apparently, On Thu, Mar 13, 2003 at 11:13:09PM +0200,
        Marian Dobre said words to the effect of;

> Hey Jake,

> Here's the dmesg output. Please let me know if there's more info you need.

Ok, it looks like there's a problem with the 3c905c and using io space
for register access.  Can you try this patch?  If you still get device
timeouts try removing the rl card.

Jake

Index: pci/if_xl.c
===================================================================
RCS file: /home/ncvs/src/sys/pci/if_xl.c,v
retrieving revision 1.131
diff -u -r1.131 if_xl.c
- --- pci/if_xl.c       4 Mar 2003 20:19:26 -0000       1.131
+++ pci/if_xl.c 13 Mar 2003 23:57:36 -0000
@@ -147,7 +147,9 @@
  * driver will use memory mapped I/O, which may be faster but which
  * might not work on some devices.
  */
+#if 0
 #define XL_USEIOSPACE
+#endif

 #include <pci/if_xlreg.h>

------------------------------

Date: Fri, 14 Mar 2003 00:38:59 -0500 (EST)
From: Mike Barcroft <m...@sparc64.style9.org>
Subject: sparc64 tinderbox failure

Tinderbox FAQ: http://people.FreeBSD.org/~mike/tinderbox.html

- --------------------------------------------------------------

>>> Rebuilding the temporary build tree

- --------------------------------------------------------------
>>> stage 1: bootstrap tools

- --------------------------------------------------------------
>>> stage 2: cleaning up the object tree

- --------------------------------------------------------------
>>> stage 2: rebuilding the object tree

- --------------------------------------------------------------
>>> stage 2: build tools

- --------------------------------------------------------------
>>> stage 3: cross tools

- --------------------------------------------------------------
>>> stage 4: populating /tinderbox/sparc64/obj/tinderbox/sparc64/src/sparc64/usr/include

- --------------------------------------------------------------
>>> stage 4: building libraries

- --------------------------------------------------------------
>>> stage 4: make dependencies

- --------------------------------------------------------------
>>> stage 4: building everything..

- --------------------------------------------------------------
>>> Kernel build for GENERIC started on Fri Mar 14 00:08:59 EST 2003

- --------------------------------------------------------------
===> hme
cc1: warnings being treated as errors
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c: In function `nexus_dmamem_alloc_size':
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c:633: warning: implicit declaration of function `mtx_lock'
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c:633: `Giant' undeclared (first use in this function)
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c:633: (Each undeclared identifier is reported only once
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c:633: for each function it appears in.)
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c:639: warning: implicit declaration of function `mtx_unlock'
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c: In function `nexus_dmamem_free_size':
/tinderbox/sparc64/src/sys/sparc64/sparc64/bus_machdep.c:669: `Giant' undeclared (first use in this function)
*** Error code 1

Stop in /tinderbox/sparc64/obj/tinderbox/sparc64/src/sys/GENERIC.
*** Error code 1

Stop in /tinderbox/sparc64/src.
*** Error code 1

Stop in /tinderbox/sparc64/src.

------------------------------

Date: Fri, 14 Mar 2003 07:16:23 -0400
From: "Redação Comercial" <redacaoc...@bol.com.br>
Subject: 300 Modelos de Cartas comerciais, avisos, convites, propostas, etc.

COMUNICADO IMPORTANTE!!

Estamos lançando o KIT DE CARTAS COMERCIAIS, que sana suas dúvidas na
elaboração de: agradecimentos, atestados e declarações, avisos,  cartas de
cobrança, cartas em inglês, comunicados,  convites,  contratos, propostas,
empregos, solicitações e pedidos, telegramas, cartas por e-mail, etc.
Composto de 02 (dois) disquetes com 150 modelos de documentos cada um, mais
livreto 20 páginas, com técnicas de redação comercial. Indicado para:
secretárias em geral, gerências, Rh, executivos, estudantes e empresas de
toda ordem.
Este kit possui um preço ínfimo em relação ao que poderá gerar no
aperfeiçoamento da comunicação de sua empresa.

Acesse nossa Home Page para mais detalhes:

http://www.redacaocartas.ihp.com.br

Ps: Caso não queira receber novas mensagens e novidades sobre esse assunto,
acesse:

http://www.remova-me.ihp.com.br

------------------------------

Date: Fri, 14 Mar 2003 14:09:23 +0200
From: Marian Dobre <m...@onix.ro>
Subject: Re: Sparc64 and standard PCI devices

Hello,

I've recompiled the kernel with your patch and I also removed the rl
card. Now im getting timeouts on the xl device.

Marian

stray vector interrupt 2029
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #7: Fri Mar 14 08:27:09 CET 2003
     r...@freebsd.onix.ro:/usr/obj/usr/src/sys/CUSTOM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0430000.
Timecounter "tick"  frequency 248000000 Hz
cpu0: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
Model: SUNW,Ultra-4
cpu1: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
cpu2: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
cpu3: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Allocating major#253 to "net"
Allocating major#252 to "pci"
nexus0: <OpenFirmware Nexus device>
nexus0: <associations>, type (unknown) (no driver attached)
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
pcib0: intr map (pci) 0: 0x7c0
pcib0: intr map (pci) 1: 0x7c4
pcib0: intr map (pci) 2: 0x7d0
pcib0: intr map (pci) 3: 0x7d4
pcib0: intr map (pci) 4: 0x800007d0
pcib0: intr map (pci) 5: 0x800007d4
pcib0: intr map (pci) 6: 0x7d8
pcib0: intr map (pci) 7: 0x7dc
pcib0: intr map (obio) 0: 0x7e0, clr: 0x1800
pcib0: intr map (obio) 1: 0x7e1, clr: 0x1808
pcib0: intr map (obio) 2: 0x7e2, clr: 0x1810
pcib0: intr map (obio) 3: 0x7e3, clr: 0x1818
pcib0: intr map (obio) 4: 0x7e4, clr: 0x1820
pcib0: intr map (obio) 5: 0x800007e5, clr: 0x1828
pcib0: intr map (obio) 6: 0x7e6, clr: 0x1830
pcib0: intr map (obio) 7: 0x7e7, clr: 0x1838
pcib0: intr map (obio) 8: 0x7e8, clr: 0x1840
pcib0: intr map (obio) 9: 0x7e9, clr: 0x1848
pcib0: intr map (obio) 10: 0x7ea, clr: 0x1850
pcib0: intr map (obio) 11: 0x7eb, clr: 0x1858
psycho at 0/0/0: setting bus #s to 0/0/0
device 0/1/0: latency timer 10 -> 82
pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 0)
device 0/1/1: latency timer 10 -> 82
pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0)
device 0/3/0: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0)
device 0/2/0: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/2/0 to 38 (preset was 0)
pci0: <PCI bus> on pcib0
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem
0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
ebus0: <auxio> addr
0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a0 03,0x1400728000-0x1400728003,0x1400726000-0x1400726003
(no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 2034,2021 (no driver
attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr
0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043 cb
irq 2018 (no driver attached)
ebus0: <fdthree> addr
0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023 f7
irq 2023 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 8090c976
ebus0: <flashprom> addr
0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,envctrl> addr 0x1400600000-0x1400600003 irq 2021,2024 (no
driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff irq 33 at device 1.1
on pci0
hme0: Ethernet address: 08:00:20:90:c9:76
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0: psycho_setup_intr: INO 33, map 0x1008, clr 0x1808
sym0: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff irq 38
at device 2.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib0: psycho_setup_intr: INO 38, map 0x1030, clr 0x1830
sym1: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff irq 32
at device 3.0 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib0: psycho_setup_intr: INO 32, map 0x1000, clr 0x1800
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0
pcib1: intr map (pci) 0: 0x800007c0
pcib1: intr map (pci) 1: 0x800007c4
pcib1: intr map (pci) 2: 0x800007d0
pcib1: intr map (pci) 3: 0x800007d4
pcib1: intr map (pci) 4: 0x800007d0
pcib1: intr map (pci) 5: 0x800007d4
pcib1: intr map (pci) 6: 0x800007d8
pcib1: intr map (pci) 7: 0x7dc
pcib1: intr map (obio) 0: 0x800007e0, clr: 0x1800
pcib1: intr map (obio) 1: 0x800007e1, clr: 0x1808
pcib1: intr map (obio) 2: 0x800007e2, clr: 0x1810
pcib1: intr map (obio) 3: 0x800007e3, clr: 0x1818
pcib1: intr map (obio) 4: 0x800007e4, clr: 0x1820
pcib1: intr map (obio) 5: 0x800007e5, clr: 0x1828
pcib1: intr map (obio) 6: 0x800007e6, clr: 0x1830
pcib1: intr map (obio) 7: 0x800007e7, clr: 0x1838
pcib1: intr map (obio) 8: 0x800007e8, clr: 0x1840
pcib1: intr map (obio) 9: 0x800007e9, clr: 0x1848
pcib1: intr map (obio) 10: 0x800007ea, clr: 0x1850
pcib1: intr map (obio) 11: 0x800007eb, clr: 0x1858
psycho at 128/0/0: setting bus #s to 128/1/1
pci1: <PCI bus> on pcib1
nexus0: <mc>, type memory-controller (no driver attached)
pcib2: <U2P UPA-PCI bridge> on nexus0
pcib2: Psycho, impl 0, version 4, ign 0x100
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
pcib2: intr map (pci) 0: 0x100
pcib2: intr map (pci) 1: 0x104
pcib2: intr map (pci) 2: 0x110
pcib2: intr map (pci) 3: 0x114
pcib2: intr map (pci) 4: 0x80000110
pcib2: intr map (pci) 5: 0x80000114
pcib2: intr map (pci) 6: 0x118
pcib2: intr map (pci) 7: 0x11c
pcib2: intr map (obio) 0: 0x120, clr: 0x1800
pcib2: intr map (obio) 1: 0x121, clr: 0x1808
pcib2: intr map (obio) 2: 0x122, clr: 0x1810
pcib2: intr map (obio) 3: 0x123, clr: 0x1818
pcib2: intr map (obio) 4: 0x124, clr: 0x1820
pcib2: intr map (obio) 5: 0x80000125, clr: 0x1828
pcib2: intr map (obio) 6: 0x126, clr: 0x1830
pcib2: intr map (obio) 7: 0x127, clr: 0x1838
pcib2: intr map (obio) 8: 0x128, clr: 0x1840
pcib2: intr map (obio) 9: 0x129, clr: 0x1848
pcib2: intr map (obio) 10: 0x12a, clr: 0x1850
pcib2: intr map (obio) 11: 0x12b, clr: 0x1858
psycho at 0/0/0: setting bus #s to 0/2/2
device 2/2/0: latency timer 8 -> 82
pcib2: ofw_pci_init: mapping intr for 2/2/0 to 1 (preset was 0)
pci2: <PCI bus> on pcib2
pci2: <network, ethernet> at device 2.0 (no driver attached)
pcib3: <U2P UPA-PCI bridge> on nexus0
pcib3: Psycho, impl 0, version 4, ign 0x100
pcib3: intr map (pci) 0: 0x80000100
pcib3: intr map (pci) 1: 0x80000104
pcib3: intr map (pci) 2: 0x80000110
pcib3: intr map (pci) 3: 0x80000114
pcib3: intr map (pci) 4: 0x80000110
pcib3: intr map (pci) 5: 0x80000114
pcib3: intr map (pci) 6: 0x80000118
pcib3: intr map (pci) 7: 0x8000011c
pcib3: intr map (obio) 0: 0x80000120, clr: 0x1800
pcib3: intr map (obio) 1: 0x80000121, clr: 0x1808
pcib3: intr map (obio) 2: 0x80000122, clr: 0x1810
pcib3: intr map (obio) 3: 0x80000123, clr: 0x1818
pcib3: intr map (obio) 4: 0x80000124, clr: 0x1820
pcib3: intr map (obio) 5: 0x80000125, clr: 0x1828
pcib3: intr map (obio) 6: 0x80000126, clr: 0x1830
pcib3: intr map (obio) 7: 0x80000127, clr: 0x1838
pcib3: intr map (obio) 8: 0x80000128, clr: 0x1840
pcib3: intr map (obio) 9: 0x80000129, clr: 0x1848
pcib3: intr map (obio) 10: 0x8000012a, clr: 0x1850
pcib3: intr map (obio) 11: 0x8000012b, clr: 0x1858
psycho at 128/0/0: setting bus #s to 128/3/3
pci3: <PCI bus> on pcib3
pcib4: <U2P UPA-PCI bridge> on nexus0
pcib4: Psycho, impl 0, version 4, ign 0x180
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
pcib4: intr map (pci) 0: 0x180
pcib4: intr map (pci) 1: 0x184
pcib4: intr map (pci) 2: 0x190
pcib4: intr map (pci) 3: 0x194
pcib4: intr map (pci) 4: 0x80000190
pcib4: intr map (pci) 5: 0x80000194
pcib4: intr map (pci) 6: 0x198
pcib4: intr map (pci) 7: 0x19c
pcib4: intr map (obio) 0: 0x1a0, clr: 0x1800
pcib4: intr map (obio) 1: 0x1a1, clr: 0x1808
pcib4: intr map (obio) 2: 0x1a2, clr: 0x1810
pcib4: intr map (obio) 3: 0x1a3, clr: 0x1818
pcib4: intr map (obio) 4: 0x1a4, clr: 0x1820
pcib4: intr map (obio) 5: 0x800001a5, clr: 0x1828
pcib4: intr map (obio) 6: 0x1a6, clr: 0x1830
pcib4: intr map (obio) 7: 0x1a7, clr: 0x1838
pcib4: intr map (obio) 8: 0x1a8, clr: 0x1840
pcib4: intr map (obio) 9: 0x1a9, clr: 0x1848
pcib4: intr map (obio) 10: 0x1aa, clr: 0x1850
pcib4: intr map (obio) 11: 0x1ab, clr: 0x1858
psycho at 0/0/0: setting bus #s to 0/4/4
device 4/2/0: latency timer 32 -> 264
pcib4: ofw_pci_init: mapping intr for 4/2/0 to 1 (preset was 1)
device 4/4/0: latency timer 8 -> 66
pcib4: ofw_pci_init: mapping intr for 4/4/0 to 1 (preset was 138)
pci4: <PCI bus> on pcib4
pci4: <network, ethernet> at device 2.0 (no driver attached)
pci4: <display, VGA> at device 4.0 (no driver attached)
pcib5: <U2P UPA-PCI bridge> on nexus0
pcib5: Psycho, impl 0, version 4, ign 0x180
pcib5: intr map (pci) 0: 0x80000180
pcib5: intr map (pci) 1: 0x80000184
pcib5: intr map (pci) 2: 0x80000190
pcib5: intr map (pci) 3: 0x80000194
pcib5: intr map (pci) 4: 0x80000190
pcib5: intr map (pci) 5: 0x80000194
pcib5: intr map (pci) 6: 0x80000198
pcib5: intr map (pci) 7: 0x8000019c
pcib5: intr map (obio) 0: 0x800001a0, clr: 0x1800
pcib5: intr map (obio) 1: 0x800001a1, clr: 0x1808
pcib5: intr map (obio) 2: 0x800001a2, clr: 0x1810
pcib5: intr map (obio) 3: 0x800001a3, clr: 0x1818
pcib5: intr map (obio) 4: 0x800001a4, clr: 0x1820
pcib5: intr map (obio) 5: 0x800001a5, clr: 0x1828
pcib5: intr map (obio) 6: 0x800001a6, clr: 0x1830
pcib5: intr map (obio) 7: 0x800001a7, clr: 0x1838
pcib5: intr map (obio) 8: 0x800001a8, clr: 0x1840
pcib5: intr map (obio) 9: 0x800001a9, clr: 0x1848
pcib5: intr map (obio) 10: 0x800001aa, clr: 0x1850
pcib5: intr map (obio) 11: 0x800001ab, clr: 0x1858
psycho at 128/0/0: setting bus #s to 128/5/5
pci5: <PCI bus> on pcib5
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
Allocating major#251 to "devstat"
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
da0 at sym1 bus 0 target 0 lun 0
da0: <SEAGATE ST336706LC 0108> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
da1 at sym1 bus 0 target 1 lun 0
da1: <SEAGATE ST336706LC 0108> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da1: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
cd0 at sym0 bus 0 target 6 lun 0
cd0: <PIONEER CD-ROM DR-124X 1.00> Removable CD-ROM SCSI-2 device
cd0: 4.629MB/s transfers (4.629MHz, offset 8)
cd0: cd present [161606 x 2048 byte records]
Mounting root from ufs:/dev/da0a
WARNING: / was not properly dismounted
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x400-0x47f mem
0x2000-0x207f irq 1 at device 2.0 on pci2
pcib2: psycho_setup_intr: INO 1, map 0xc00, clr 0x1408
xl0: Ethernet address: 00:04:75:cf:90:2a
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
stray vector interrupt 272
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout

------------------------------

Date: Fri, 14 Mar 2003 15:14:38 -0500 (EST)
From: jason <ja...@monsterjam.org>
Subject: is this still not ported?

on my ultrasparc 5..

sparky# uname -a
FreeBSD sparky.cisco.com 5.0-RELEASE FreeBSD 5.0-RELEASE #0: Fri Jan 17
20:03:38 GMT 2003
r...@numenor.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC  sparc64

sparky# make install
Cannot determine M3 target for this architecture
*** Error code 1
Stop in /usr/ports/net/cvsup-without-gui.
sparky#

I searched google and only found..

"Wait. :-)

The M3 compiler is still being ported."

I didnt find anything in the release notes..
http://www.freebsd.org/releases/5.0R/relnotes-sparc64.html

and I dont see cvsup in
ftp.freebsd.org:/pub/FreeBSD/ports/sparc64/packages-5.0-release/net>
either..

regards,
Jason

------------------------------

End of freebsd-sparc-digest V5 #253
***********************************

To Unsubscribe: send mail to majord...@FreeBSD.org
with unsubscribe freebsd-sparc-digest in the body of the message


    Reply to author    Forward  
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
End of messages
« Back to Discussions « Newer topic     Older topic »

Create a group - Google Groups - Google Home - Terms of Service - Privacy Policy
©2009 Google