Hello
I managed to compile siphon, but seems to have no g729 codec enabled,
someone could use?
--
You received this message because you are subscribed to the Google Groups "Siphon" group.
To post to this group, send email to sip...@googlegroups.com.
To unsubscribe from this group, send email to siphon+un...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/siphon?hl=en.
To unsubscribe from this group, send email to siphon+un...@googlegroups.com.
To unsubscribe from this group, send email to siphon+un...@googlegroups.com.
i am working on the pjsip from trunk, so the patch is not directly
applicable. however, i manually edited the files as mentioned in the
patch and the pjsip compiled fine.
and then i put the libg729a.a in pjproject-svn/third_party/lib
( obtained by compiling http://code.google.com/p/siphon/source/browse/#svn/trunk/g729a
) .
but i do not seem to get the g729 enabled. is there any other steps?
Khan
> 2010/8/7 albert <pepel...@gmail.com>
> > > > <siphon%2Bunsu...@googlegroups.com<siphon%252Bunsubscribe@googlegroups. com>
> > <siphon%252Buns...@googlegroups.com<siphon%25252Bunsubscribe@googlegro ups.com>
>
> > > > > > .
> > > > > > For more options, visit this group at
> > > > > >http://groups.google.com/group/siphon?hl=en.
>
> > > > --
> > > > You received this message because you are subscribed to the Google
> > Groups
> > > > "Siphon" group.
> > > > To post to this group, send email to sip...@googlegroups.com.
> > > > To unsubscribe from this group, send email to
> > > > siphon+un...@googlegroups.com<siphon%2Bunsu...@googlegroups.com>
> > <siphon%2Bunsu...@googlegroups.com<siphon%252Bunsubscribe@googlegroups. com>
pjmedia_codec_g729_initpjmedia_codec_g729_deinit
pjmedia_codec_XXX_init
pjmedia_codec_XXX_deinit
To unsubscribe from this group, send email to siphon+un...@googlegroups.com.
On Nov 10, 10:33 pm, khan <shroukk...@gmail.com> wrote:
> hi,from your mail and after reading the discussion here:http://code.google.com/p/siphon/issues/detail?id=374
> i tried setting the frm_ptime to 20 and frm_per_pkt to 2 , but it
> only increased the noise!
> i have tried different combinations. so far,got the best (but really
> not that good) result by setting ptime to 10ms and frm_per_pkt to 2.
> do you have any suggested value?
> Khan
> On Nov 9, 5:11 pm, Samuel Vinson <samuelv0...@gmail.com> wrote:
>
>
>
>
>
>
>
> > Check the ptime ing729.c
>
> > Samuel
>
> > 2011/11/9 khan <shroukk...@gmail.com>
>
> > > Hi,
> > > yes, editing audio_codec.c and adding
>
> > > #if PJMEDIA_HAS_G729_CODEC
> > > status = pjmedia_codec_g729_init(endpt);
> > > if (status != PJ_SUCCESS)
> > > return status;
> > > #endif /* PJMEDIA_HAS_G729_CODEC */
>
> > > indeed enablesg729. it should be part of the patch. but in my case,
> > > actually the issue was in codec.c
>
> > > /* Since 2.0 we require codec factory to implement "destroy" op.
> > > Please
> > > * see:https://trac.pjsip.org/repos/ticket/1294
> > > *
> > > * Really! Please do see it.
> > > */
> > > PJ_ASSERT_RETURN(factory->op->destroy != NULL, PJ_ENOTSUP);
>
> > > looks like theg729.c did not implement the destroy op. i commented
> > > out this part and it compiled and rang729just fine and i am able to
> > > useg729with my asterisk
>
> > > however, theg729.c i got fromhttp://www.piemontewireless.net/File:G729.c
> > > > > > > but i do not seem to get theg729enabled. is there any other
> > > steps?
>
> > > > > > > Khan
>
> > > > > > > On Aug 8 2010, 2:44 am, Samuel Vinson <samuelv0...@gmail.com>
> > > wrote:
> > > > > > > > logically yes ;-)
>
> > > > > > > > 2010/8/7 albert <pepel...@gmail.com>
>
> > > > > > > > > Thanks Samuel, I found a constant called VOLUME_MULT in
> > > call.h, do
> > > > > you
> > > > > > > > > think if I change it the volume increase?
>
> > > > > > > > > On 6 ago, 17:34, Samuel Vinson <samuelv0...@gmail.com> wrote:
> > > > > > > > > > I don't think theg729is the issue.