Rs485

[John Potpolak]

has anyone used rs485 to connect to sedona device ???

[mauro saderi]

hi look at this link

http://www.tridiumeurope.com/storage/downloads/TridiumEuropeResource_en48connectingaslavedevicetotheios30p_1305583077.pdf

regards

[mauro saderi]

have a look at the link below

http://www.tridiumeurope.com/138-sedona-eng--notes.html

regards

On Dec 30 2011, 1:37 pm, John Potpolak <jpo...@gmail.com> wrote:

[Patrick Cunningham]

I verified both RS-232 and RS-485 communications on the Sedona Dev
Kit. I used a custom serial protocol driver that was implemented
specifically for that testing purpose. However if your questions is,
"Has anyone made a Workbench connection (SOX protocol) via the RS-485
port of a Sedona device?"... I have not done that.

On Dec 30 2011, 8:37 am, John Potpolak <jpo...@gmail.com> wrote:
> has anyone usedrs485to connect to sedona device ???

[John Potpolak]

Do we need the sox through rs485 if what you did works like modbus or bacnet then all is good

--
You received this message because you are subscribed to the Google Groups "Sedona Framework" group.
To post to this group, send email to sedo...@googlegroups.com.
To unsubscribe from this group, send email to sedonadev+...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/sedonadev?hl=en.

[Dan Giorgis]

On Thu, Jan 5, 2012 at 8:15 AM, John Potpolak <jpo...@gmail.com> wrote:

Do we need the sox through rs485 if what you did works like modbus or bacnet then all is good

You need an IP connection to the Sedona device in order to use Sox to program the device, add/remove kits, etc. 

Sedona can talk to other devices using 485, but you cannot connect Sedona deivces to Niagara Workbench or JACE devices over 485 using standard Tridium drivers.

[John Potpolak]

Gotcha Brian frank should have left that of the power point it showed sedona devices on bacnet mstp comm trunk LOL

--

[Dan Giorgis]

IP over BACnet MSTP a possibility in the future, but not currently supported.  Specification is currently winding it's way through IETF and ASHRAE committees.  This would enable Sox over IP over BACnet MSTP.