gyro inductance

[RustyJames]

you like magnet projects here a good one for you I built when I was
27
years old,
It was a design for a Gyroscopic Inductance circuit for DC current
production using the gyroscope itself as the induction circuit . It
will produce Direct current from a
gyroscope functioning in a low gravitational field as an inductance
circuit. Two non-permeable gimbal armatures rotate around a
permanent neodymium inner magnet 180 degrees out of phase from one
another
giving 360 degrees of a full rotation and precesson or counter
spin,that allow a 100% duty cycle
when precession occurs. A north and south alignment on the spherical
inner permanent magnet rotates around the central centrifugal spin
axis witch doubles as a rotor flywheel. Now utilizing nano carbon
fiber as the coils
in the inductor circuit; they are imbedded into the gyro’s non-
permeable gimbals in a zigzag pattern un-like the coils in an
induction circuit. Magnetic couplers between the gyroscopes parts
reduce further fatigue on the motor parts and reduce friction. There
are strategically placed permeable alloys in the gimbal armatures
when
pulsed with DC current create magnetic field areas that interact with
the rotor for start, and stop and homing of the gimbals. if
gravitational
interference occurs in space flight a dc pulse circuit 90 degrees
adjacent from the rotor flywheel controlled with small pulses of
current to control initial spin and braking on the central rotor
while
motor functions are restored as needed, This design has several
viable
applications for aro space industry. If solar panel deployment fails
or damages to solar panels this is a solid backup for running the
system operations of satellites and communication and
instrumentation,
imaging instrumentation devices for space flight