Description:
Info on fusion, esp. "cold" fusion.
|
|
|
reactor
|
| |
I think that the power generated by the fuel and the power capacity of
the output winding must match and that the tank circuit should have ten
times the energy stored at is being drawn. So if 50 KW is being drawn
then 100 KJ must be stored in the tank circuit and the ion pressure must
be correct that the power generated by the plasma must equal the power... more »
|
|
|
50 KW reactor suggestion
|
| |
It means "turns times winding current" if 40 mA is flowing in a 20000T
winding then the current sheet is 800 A so the plasma curent is 800 A.
The plasma is generated by the ionisation wire which is excited by 20KV
60KHz power supply. The ion pressure is 800.800.mu/D/length of winding. But since the... more »
|
|
|
ColdFusion Developer Required
|
| |
Send resume to gaurav.si...@pyramidci.com ASAP.
ColdFusion Developer Work Location: Atlanta, GA Duration: Long Term Contract
Details of Position:
*3-5 Years’ Experience in SQL Server *Support the development of business requirements and program specifications *Assist in the creation of project timelines... more »
|
|
|
Reactor 1
|
| |
Hi,
I did another run on reactor one with a better vacuum and with an
ionisation wire. The GM dose meter lit up in the red and flashed.
Indicating 7.5�Sv/h.
By turning the meter it looks like it was gamma radiation. The
ionisation wire needed to be on.
Dr Chris
[link]... more »
|
|
|
run with reactor 1
|
| |
I have done another run with reactor 1. I found and repaired an old high
voltage (RF) generator that lights a fluorescent tube nearby and wrapped
that round one end of the reaction chamber and at the other I earthed.
Capacity coupled.
I have a problem with the vacuum as it leaks.... more »
|
|
|
reactor 2 resonance system
|
| |
'Program to find the inductance of a multilayer coil by summing the
inductance of each layer and the effect of mutual inductance
'Inductance = 4.piE-7.A.n^2/l
'to find the final diametere of a multilayer coil and the length of wire
'each layer adds thickness to layer so first work out turns per layer... more »
|
|
|
reactor 2
|
| |
I have packed Reactor 1 ready for shipping to Luke and I am continuing with reactor 2. This is the design of the resonance coil and capacitor:
diameter of wire in mm 0.170
diameter of former in mm 20
length of former in mm 55
number of turns 19407
Turns per layer 323.529412... more »
|
|
|
Reactor
|
| |
I had a problem when a plume of red fire came from the open vacuum
system and my regulator 10 K pot used to set the power level fried. The
content of the reaction vessel was air..
It was very sudden after the exciter had been running for some time so I
am unsure what happened. Dr Chris... more »
|
|
|
