Here I use more turns and a smaller capacitor to get 50 Hz resonator. The inductance is calculated by a published formula for multilayer coil in Wikipedia and the capacitor is a 0.1E-6uF commercial capacitor. I cannot wind the 29000T coil as I have already wound the 13000T coil and I have run out of wire and I would have to get a new former made.
The result is the same power out at 500 v (RMS) across the winding but with a lower winding current and therefore much lower copper loss for the power.
Here is the calculation print out.
diameter of wire in mm 0.170
diameter of former in mm 60
length of former in mm 60
number of turns 30000
Turns per layer 352.941176
Number of Layers 85.0
Diameter of coil 0.0889
Length of Wire 7133.00465 Meters
resistance of winding 5278.56342
total inductance by complex formula 106.305014
1 for exit 2 for new turns 1
capacitance of external capacitor 0.1E-6
dynamic impedance 201390.048
Resonant frequency is 48.8050695
1 for exit 2 for another turns value 2
number of turns 28000
Turns per layer 352.941176
Number of Layers 79.3333333
Diameter of coil 0.86973333e-1
Length of Wire 6544.85897 Meters
resistance of winding 4843.32408
total inductance by complex formula 92.6377114
1 for exit 2 for new turns 1
capacitance of external capacitor 0.1E-6
dynamic impedance 191268.868
Resonant frequency is 52.2814835
1 for exit 2 for another turns value 2
number of turns 29000
Turns per layer 352.941176
Number of Layers 82.1666667
Diameter of coil 0.87936667e-1
Length of Wire 6837.23504 Meters
resistance of winding 5059.68811
total inductance by complex formula 99.3500352
1 for exit 2 for new turns 1
capacitance of external capacitor 0.1E-6
dynamic impedance 196356.046
Resonant frequency is 50.4844696
1 for exit 2 for another turns value 1
Q 6.2296015
Winding Mass 1.38766321 Kg
Rms Potential 10000
Half Wavelength 0.03
Velocity 3.02906818
Peak Potential 14000.0
Peak Current 0.38272773
Peak Ampere Turns 11099.1042
Plasma Current 11099.1042
Plasma Current Density 1.10991042e9 Amp per meter^2, near centre
Additional Pressure of Plasma 2.86728115e10 Pa
Power lost through resistance 529.389802 Watt
Power Generated 4.6498748e14 Watt
1 exit 2 loop 2
Rms Potential 500
Half Wavelength 0.03
Velocity 3.02906818
Peak Potential 700.0
Peak Current 0.19136387e-1
Peak Ampere Turns 554.955209
Plasma Current 554.955209
Plasma Current Density 55495520.9 Amp per meter^2, near centre
Additional Pressure of Plasma 71682028.9 Pa
Power lost through resistance 1.3234745 Watt
Power Generated 2.90617175e9 Watt
1 exit 2 loop 1
1 exit 2 again 1
The power is for deuterium but for natural hydrogen the power is multiplied by the square of the fractional content of deuterium in the gas.
The frequency is adjusted with a high voltage parallel capacitor.
Dr Chris
http://www.cs003o327.webspace.virginmedia.com/