Description:
Welding of materials for manufacture & repair.
|
|
|
test question
|
| |
why are there so many test groups listed under newsgroups?
|
|
FS-300 amp MIG
|
| |
Ive got more migs than I can use..and this Airco PhaseAre 350..a full 300 Amp! Mig..is 3 phase. Its a georgious machine and runs very very well. I built a cart, big tires yada yada..Ill even include a Argon regulator. It has a nearly new Tweeco gun, good regulator etc etc etc. $1200 OBO This IS a 300 AMP wirefeed welder in both great operation and in great... more »
|
|
CK Products at FabTech 2009
|
| |
My wife and I just got back from FabTech in Chicago. What an excellent experience. I met with many of the vendors: Miller, Lincoln, Fronius, Esab, and on my way out...CK Products. They are a serious class act. I met with their National Product Manager and I told them about the 5 CK torches that I owned, and that... more »
|
|
Rusty Dubs & Galvanised repair
|
| |
Watcha :) Can I pick your brains please? I have a rusty '78 VW camper (UK). The bottom of the b-post & rear of the front wheel arch is rotten. I've cut out the tin-worm Would it be advantageous to use galvanonised steel to replace these areas? Of course after stripping the area to be welded (MIG) Thanks... more »
|
|
project ideas?
|
| |
Hello, I have been on this site lurking for God knows how long. I am a journeyman welder of 30 years. I have also got pressure tickets in SMAW of low carbon, TIG Stainless and TIG Inconel and am also a qualified weld inspector in ASME Z662 (for pipeline construction). I also teach when I have... more »
|
|
Welding in water
|
| |
...I've crossposted this to sci.engr.joining.welding. There's no real electrical principle involved here, unless the current through sea water somehow damages one of those auto-darkening hood lenses. Good Luck! Rich
|
|
DIY machine jack
|
| |
Hi, I have a lathe and a milling machine in my home shop. I want to install levelling feet under the machines, so I need to lift the machines at each corner. The machines are rather heavy. The lathe is 3700 pounds and the mill is 4200 pounds. I have looked for machine jacks that would be able to lift these, but they are around 600$ here in Turkey. I don't... more »
|
|
What is a Smith 55-T plasma torch worth?
|
| |
I bought this some years ago and within 6 months Smith was bought out and the supply of consumables has pretty much dried up. I'm looking to sell it and replace it with another torch. What would be a fair asking price? It runs fine, and has quite a few consumables with it, but the long nozzles that I liked so well are gone, burned up the last... more »
|
|
|