ELEKTRIK: CALL FOR PAPERS: Special Issue on Process Control (fwd)
H. Taner
>Date: Fri, 5 Dec 1997 15:24:45 +0300 (MEST)
>From: tolga ciloglu <cilt...@rorqual.cc.metu.edu.tr>
ELEKTRIK
Turkish Journal of Electrical Engineering and Computer Sciences
CALL FOR PAPERS
Special Issue on Process Control
Sponsored by the Scientific and Technical Research Council of Turkey
(TUBITAK) and Chamber of Electrical Engineers (EMO), ELEKTRIK is an
international journal on all aspects of electrical engineering and
computer sciences. In a series of special issues that have been
scheduled to be published in 1998, an issue is devoted to process control
to appear in mid-summer. Original research papers on
recent advances in this area are sought.
Scope:
Papers are invited in all areas of process control including:
Identification
Robust Control
Nonlinear Control
Synthesis of Control Structures
Large Scale Systems and Decentralized Control
Industrial Applications
Adaptive Control
Model Predictive Control
Intelligent Techniques
Neurocontroller
Fuzzy Controllers
Feedback Linearization.
Industrial applications are most wellcome.
Submission of Papers:
Prospective authors should follow the regular guidelines of ELEKTRIK.
They should submit the manuscripts to one of the guest editors of this
issue.
Guest Editor:
Yaman Arkun
School of Chem. Eng.
GEORGIA INSTITUTE OF TECHNOLOGY
ATLANTA, GA 30332-0100 USA
e-mail: yaman...@che.gatech.edu
Important Dates:
Submission of manuscripts April 1 , 1998
Notification of acceptance July 15 , 1998
-----------------------------------------------------------------------
For further information, in addition to the Guest Editor, you can contact
Kemal Leblebicioglu, Editor Tolga Ciloglu, Assoc. Editor
Elektrik ve Elektronik Muh. Bol., Elektrik ve Elektronik Muh. Bol.,
Orta Dogu Teknik Universitesi, Orta Dogu Teknik Universitesi,
06531, Ankara, Turkey 06531, Ankara, Turkey
e-mail: kl...@rorqual.cc.metu.edu.tr e-mail: cilt...@rorqual.cc.metu.edu.tr
fax: 90-312-210 12 61 fax: 90-312-210 12 61
INSTRUCTIONS TO CONTRIBUTORS
Submission of Manuscript
1. Send 4 copies of your paper written in English to the below address.
The paper shall be subjected to a full review procedure and a decision
whether to accept the paper will be taken by the Editor based on the
reviews. Typical review period is 3 months.
2. Enclose a separate sheet giving your preferred address for
correspondence and return of proofs.
3. All manuscripts must be accompanied by the Copyright Release Form which
can be found on a following page. This form must be completely filled out
and signed by all authors before processing of the manuscript will begin.
4. After the manuscript has been accepted for publication, i.e., after
referee-recommended revisions are complete, the author will not be
permitted to make any new additions to the manuscript.
5. Attention: before publication the galley proof is always sent to the
author for corrections. Thus, it is solely the author's responsibility
for any typographical mistakes which occur in their article as it appears
in the journal. Only those mistakes/ omissions which occur due to some
negligence on our part during the final printing will be reprinted in a
Corrections section of a later issue. However, this does not include
those errors left unnoticed by the author on the galley proofs.
Style for Manuscript:
1. The first page must contain the English title of the paper, author(s)
names and affiliations/addresses in English, abstract in English (not more
than 300 words), complete mailing address, telephone number, e-mail
address if there is one, and acknowledgement of financial or other
support.
2. Manuscripts should be type-written using a font style and size which is
quite legible, double-spaced throughout with ample margins, and single
sided on white A4 standard paper.
3. Provide an introduction that includes a statement of the purpose and
the contribution of the paper comparing it to the existing results in the
literature.
4. If appropriate, indicate advantages, limitations, and possible
applications of your contribution in a conclusion section.
5. References should be numbered consecutively in square brackets [1] in
the paper and listed in the order of appearance in a separate
bibliography at the end of the manuscript.
Instructions for Figures and Tables:
1. All illustrations not including tables (photographs and other films,
drawings, graphs, etc.) must be labeled as "Figure".
2. The proper position of each table and figure must be clearly indicated
in the paper.
3. All tables and figures must have a number (Table 1, Figure 1) and a
caption or legend. If there is only one table or figure simply label it
"Table" or "Figure".
4. All tables and figures must be numbered consecutively throughout the
paper.
5. All captions and legends must also be double-space typed on a separate
sheet and labeled according to which table or figure they belong.
6. Dimensions of tables and figures must not exceed 16x20 cm and should be
no smaller than 8 cm in width.
7. Tables must be clearly typed, each on a separate sheet, and
double-spaced. Dimensions including caption, title, column heads, and
footnotes must not exceed 16x20 cm and should be no smaller than 8 cm in
width.
8. Tables may be continued onto another sheet if necessary but dimensions
still apply.
9. Figures must be originals, sharp and noise-free, and drawn clearly in
India ink on white paper or printed on smooth tracing/drawing paper.
Reduced photocopies are not acceptable. Photographs must be clear, black
and white, printed on glossy paper and of good contrast.
10. Drafting or art service cannot be provided by ELEKTRIK.
Computer Disk:
If you are able to initially prepare your manuscript in a LATEX file
including the figures translated into the picture environment of LATEX or
Encapsulated PostScript format (EPS), we advise that you do so. Then,
only if and after your manuscript is accepted for publication, we will ask
you to submit a revised disk copy of your manuscript which will enable us
to more efficiently and accurately prepare proofs. (This is not a
requirement but is highly encouraged.)THE LATEX STYLE FILE CAN BE OBTAINED
FROM the >ftp server "ozelsayi.metu.edu.tr",
with "userid: tjeecs,
password: >trik.elek",
or by direct e-mail contact from the editor.
FINAL CHECKLIST FOR AUTHORS
Before you submit your work, please take the time to be certain that your
paper (and other writings as applicable) is in the correct format and that
you have included everything necessary by checking it against this
checklist.\\
-Copyright Release form is enclosed, completed and signed by all
authors.
-Four copies of paper submitted (one original, three copies)
-Entire paper is 5mm double-spaced (incl. abstract, tables,
captions/legends, references)
-Margins are 3 cm each side Font size is 12pt. or 3mm tall Font
style and type is quite legible Author(s) names are fully written (not
abbreviated)
-English title is given English address is given
-English abstract is given
-Turkish title is given (Only for Turkish authors)
-Turkish address is given (Only for Turkish authors)
-Turkish abstract is given (Only for Turkish authors)
-Original figures are enclosed
-Original figures are prepared correctly according to instructions
-Dimensions of figures are min.=8x20cm; max.=16x20cm
-Figures are referred to consecutively in the paper
-Dimensions of tables are min.=8x20cm; max.=16x20cm
-Tables are referred to consecutively in the paper
-Table and figure legends/captions typed on a separate sheet
-References are referred to consecutively in paper in brackets [ ]
-References are listed in the order of appearance
COPYRIGHT RELEASE FORM
TUBITAK
The Scientific and Technical Research Council of Turkey
The undersigned authors release TUBITAK, Department of Scientific Journals
from all responsibility concerning the manuscript entitled:
(Title of paper):
By (authors names):
upon its submission to ELEKTRIK, Turkish Journal of Electrical Engineering
and Computer Sciences The undersigned authors warrant that the article is
original, is not under consideration by another journal, has not been
previously published or that if it has been published in whole or in part,
any permission necessary to publish it in the above mentioned journal has
been obtained and provided to the Department of Scientific Journals
together with the original copyright notice. We sign for and accept
responsibility for releasing this material. Copyright to the above article
is hereby transferred to TUBITAK, Department of Scientific Journals
effective upon acceptance for publication. However, the following rights
are reserved by the authors:
Note: In all of the below cases, the article's publication by TUBITAK
must be appropriately stated as a complete reference.
1. All proprietary rights other than copyright, such as patent rights;
2. The right to use, free of charge, all or part of this article in
future works of their own, such as books or lectures; and
3. The right to reproduce the article for their own purposes provided the
copies are not offered for sale.
To be signed by all authors:
signature: date: signature: date:
printed name: printed name:
________________________________________________________________________
signature: date: signature: date:
printed name: printed name:
_________________________________________________________________________
signature: date: signature: date:
printed name: printed name:
Correspondence address: