Description:
Fixing electronic equipment.
|
|
|
Pioneer sx-727 FM problem
|
| |
Hi,
I have a Pioneer sx-727. I'm the original owner over 40 years.
Recently developed fm problem.
Loud crackling sound on fm station and then station drifts. No noise
at all between stations.
AM reception also not good, background buzz, humm between
stations on AM only. Unit works perfectly with CD and other inputs.... more »
|
|
DC motor problems
|
| |
A 1/2(?) horsepower 2-brush DC motor was having bearing issues so I disassembled it and replaced the ball bearings, turned down the commutator on a lathe, and installed new original equipment brushes. A good clean-up was done as there was much grease and carbon dust inside.
Now when I apple power it just growls. If I turn it by hand with power... more »
|
|
Dead Canon PowerShot A75
|
| |
I guess the little camera is 5 years old or so... but last week skiing
at 11K feet it worked fine for 2 days then it crapped out.
This thing is dead like someone took the batteries out... press the on
button and nothing happens. (Yes, I tested good batteries.) I'm not
used to things dying so abruptly, they usually give you a hint.... more »
|
|
Solutions Manuals, Instructor Manuals, Test Banks collection 2012
|
| |
Hello,
We would like to inform you that we have updated our list with the
following new titles.
You can contact us directly at Student.p24(at)Hotmail(dot)com .
If the title you are looking for is not listed, do not hesitate to
contact us,
we will try to help.
==========
2011 Federal Taxation, 5th Edition 2011, Pratt.Kulsrud, Instructor... more »
|
|
SIL & SAFETY
|
| |
HI All!
I would really appreciate if you could visit my website and leave your
comments for suggestions & improvements
[link]
Regards
|
|
Increasing Cable TV signal strength
|
| |
Hi All,
I'm on a boat, about 170ft from the utility post.
Recently our cable company switched to the wonderful world of
Digital TV. I got the new digital converter and had no picture.
I took the box back and got a second box, still no picture. So now I suspect a weak signal and confirm that it is the cable length. The cable... more »
|
|
Nikon Coolscan III problems
|
| |
I have a Nikon Coolscan III (LS-30) film scanner that has worked flawlessly since I purchased it new about twelve years ago. Now, however it is giving a few problems in that the carriage appears to stick.
It operates by moving the scanning carriage forward and backwards over a transparency or strip of film using a stepper motor. A second stopper... more »
|
|
|