info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Norver model NU-1C single channel FM and subcarrier receiver.
11 views
Skip to first unread message
klem kedidelhopper
Apr 28, 2010, 12:49:44 PM4/28/10
to
Is anyone familiar with these radios? They were originally furnished
to the blind. This one appears to be tuned to 90.1MHZ. I don't know if
there is still any sub carrier stuff around but in any case I would
like to see if I can change the receiver frequency. There is a crystal
but perhaps there may be enough room to move without replacing it.
Thanks, Lenny
to the blind. This one appears to be tuned to 90.1MHZ. I don't know if
there is still any sub carrier stuff around but in any case I would
like to see if I can change the receiver frequency. There is a crystal
but perhaps there may be enough room to move without replacing it.
Thanks, Lenny
tm
Apr 28, 2010, 1:05:21 PM4/28/10
to
"klem kedidelhopper" <captainvi...@gmail.com> wrote in message
news:0d41dcbc-7977-4a6e...@w3g2000vbd.googlegroups.com...
FM channels are on 200 kHz centers. I doubt you will be able to rubber the
xtal that far.
fynn...@yahoo.com
Apr 28, 2010, 5:19:28 PM4/28/10
to
On Apr 28, 5:49 pm, klem kedidelhopper <captainvideo462...@gmail.com>
wrote:
wrote:
You can Change the crystal. Is the crystal the metal can type? If yes
replace it with a 27 MHZ type. These are normally found in Toy cars
remote control.
klem kedidelhopper
Apr 28, 2010, 6:47:38 PM4/28/10
to
But why would I use a 27 MHZ crystal in an broadcast band FM radio?
Lenny
0 new messages