Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Brother MFC-9130CW intermittently won't power on.

36 views
Skip to first unread message

David Farber

unread,
Feb 25, 2019, 3:57:23 PM2/25/19
to
We've had this Brother MFC-9130CW printer/scanner/fax for about 3 years.
Sometimes (about twice a week) when you try to power it on, it doesn't
go on. The internet is full of similar complaints about this issue. The
"fix" is to unplug it for a minute and then plug it back in. This
workaround always works. I'd be more interested in finding out how to
permanently fix it. It worked fine for the first two years plus. Has
anyone disassembled one of these and found a cure for this?

Thanks for your reply.

--
David Farber
Los Osos, CA

mako...@yahoo.com

unread,
Feb 26, 2019, 4:39:44 PM2/26/19
to
when you say you "try to power it on"

do you mean you push the physical power button on the printer?

or is the printer in sleep mode and you send it data which is supposed to wake it up?

m

David Farber

unread,
Feb 26, 2019, 7:38:22 PM2/26/19
to
Every evening I hold the power button down for a couple of seconds until
it powers off completely. It is not in sleep mode. The only way to use
it again is to hold the power button down for a couple of seconds until
it powers back on. Then you can use it. I'm about to go hunting for some
disassembly instructions because it wouldn't power on again today.

mako...@yahoo.com

unread,
Feb 27, 2019, 4:37:09 PM2/27/19
to
On Tuesday, February 26, 2019 at 7:38:22 PM UTC-5, David Farber wrote:

> > On Monday, February 25, 2019 at 3:57:23 PM UTC-5, David Farber wrote:
> >> We've had this Brother MFC-9130CW printer/scanner/fax for about 3 years.
> >> Sometimes (about twice a week) when you try to power it on, it doesn't
> >> go on. The internet is full of similar complaints about this issue. The
> >> "fix" is to unplug it for a minute and then plug it back in. This
> >> workaround always works. I'd be more interested in finding out how to
> >> permanently fix it. It worked fine for the first two years plus. Has
> >> anyone disassembled one of these and found a cure for this?
> >>
> >> Thanks for your reply.
> >>
> >> --
> >> David Farber
> >> Los Osos, CA
> >
> > when you say you "try to power it on"
> >
> > do you mean you push the physical power button on the printer?
> >
> > or is the printer in sleep mode and you send it data which is supposed to wake it up?
> >
> > m
> >
> Every evening I hold the power button down for a couple of seconds until
> it powers off completely.

why did you do this..?

it draws very little power in sleep mode.

m

Spare Change

unread,
Mar 4, 2019, 1:29:56 AM3/4/19
to
> Every evening I hold the power button down for a couple of seconds until
> it powers off completely. It is not in sleep mode. The only way to use
> it again is to hold the power button down for a couple of seconds until
> it powers back on. Then you can use it. I'm about to go hunting for some
> disassembly instructions because it wouldn't power on again today.
>
> Thanks for your reply.

Did you find a solution?


David Farber

unread,
Mar 6, 2019, 11:48:43 AM3/6/19
to
Not yet, though I did find a service manual.

https://www.manualslib.com/download/842730/Brother-Mfc-9130cw.html

Take note (on page 331) of the extensive procedure required if you ever
had to replace the power supply board .

When the problem becomes more frequent and annoying, then I'll
disassemble it and look for cold solder joints, failing capacitors, etc...
0 new messages