Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
USB Charging Module for 3.7V Lithium battery recommendation request
30 views
Skip to first unread message
Mike S
May 20, 2020, 3:00:22 AM5/20/20
to
I have a pair of Even h3 headphones that had a short to ground on the
positive Voltage supply. The battery has a small circuit board attached
to the terminals, similar battery ct's state "built-in battery
protection circuit module PMC" for overcharging, overdischarging and
short circuit protection. I think the circuit got stressed from being
shorted to ground for too long too many times because the battery has
3.5 V after a short charge (connecting 4.5V directly to the terminals),
but the output voltage from the circuit board is anywhere from 0 to 0.5Vdc.
I'm looking at charging modules on ebay since this is a simple problem
and cheaper than a battery, can anyone recommend a charger module
they've had good luck with?
These looks good to my inexperienced eye, but they're stated to be for
an 18650 battery, I have a small flat battery, I don't know if this
matters.
high current (3A) version
5V USB 1S 3.7V Lipo Lithium Li-ion 18650 Battery Charging Board Charger
Module
https://www.ebay.com/itm/5V-USB-1S-3-7V-Lipo-Lithium-Li-ion-18650-Battery-Charging-Board-Charger-Module/191992007388?hash=item2cb39d8adc:m:mTJtSiEYqIJd4lTEvZWK95w
lower current version
USB 1S 3.7v 4.2v Lithium Lipo Li-ion 18650 Battery Charging Board
Charger Module
https://www.ebay.com/itm/USB-1S-3-7v-4-2v-Lithium-Lipo-Li-ion-18650-Battery-Charging-Board-Charger-Module/152734465560?epid=17006867994&hash=item238faefe18:g:NMQAAOSwvSxau44y
My battery is similar to this, same 503040 battery but different ct. board.
https://www.ebay.com/itm/503040-3-7v-Battery-600mAh-for-SkyBell-HD-Doorbell-Camera-Bluetooth-Headphones/193133417570
TIA
Mike
positive Voltage supply. The battery has a small circuit board attached
to the terminals, similar battery ct's state "built-in battery
protection circuit module PMC" for overcharging, overdischarging and
short circuit protection. I think the circuit got stressed from being
shorted to ground for too long too many times because the battery has
3.5 V after a short charge (connecting 4.5V directly to the terminals),
but the output voltage from the circuit board is anywhere from 0 to 0.5Vdc.
I'm looking at charging modules on ebay since this is a simple problem
and cheaper than a battery, can anyone recommend a charger module
they've had good luck with?
These looks good to my inexperienced eye, but they're stated to be for
an 18650 battery, I have a small flat battery, I don't know if this
matters.
high current (3A) version
5V USB 1S 3.7V Lipo Lithium Li-ion 18650 Battery Charging Board Charger
Module
https://www.ebay.com/itm/5V-USB-1S-3-7V-Lipo-Lithium-Li-ion-18650-Battery-Charging-Board-Charger-Module/191992007388?hash=item2cb39d8adc:m:mTJtSiEYqIJd4lTEvZWK95w
lower current version
USB 1S 3.7v 4.2v Lithium Lipo Li-ion 18650 Battery Charging Board
Charger Module
https://www.ebay.com/itm/USB-1S-3-7v-4-2v-Lithium-Lipo-Li-ion-18650-Battery-Charging-Board-Charger-Module/152734465560?epid=17006867994&hash=item238faefe18:g:NMQAAOSwvSxau44y
My battery is similar to this, same 503040 battery but different ct. board.
https://www.ebay.com/itm/503040-3-7v-Battery-600mAh-for-SkyBell-HD-Doorbell-Camera-Bluetooth-Headphones/193133417570
TIA
Mike
Mike S
May 21, 2020, 11:14:56 PM5/21/20
to
On 5/20/2020 11:00 PM, Charlie+ wrote:
> On Wed, 20 May 2020 00:00:16 -0700, Mike S <ms...@yahoo.com> wrote as
> underneath :
> Poundland cheap £1 Battery bank - they use USB small board to charge and
> have BM you can use with 18650 or smaller Li cel - it doesnt matter. C+
Thanks!
https://www.youtube.com/watch?v=XnG86QMxGqw
> On Wed, 20 May 2020 00:00:16 -0700, Mike S <ms...@yahoo.com> wrote as
> underneath :
> have BM you can use with 18650 or smaller Li cel - it doesnt matter. C+
Thanks!
https://www.youtube.com/watch?v=XnG86QMxGqw
0 new messages