Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Standby voltage

3 views
Skip to first unread message

Vince Schmitt

unread,
Nov 14, 2011, 10:10:47 AM11/14/11
to
Hi!
I need to know if there is supposed to be 5 Volts on the control board on
Visio TV MDL VW37LHDTV20A
Thank you for any info I can get.
Vince

mike

unread,
Nov 14, 2011, 5:23:45 PM11/14/11
to
Can't tell you anything about that model,
but
any device capable of doing anything while in standby, like turn it on with
a remote, must have power somewhere...control board is a likely place.

Franc Zabkar

unread,
Nov 15, 2011, 1:55:18 AM11/15/11
to
On Mon, 14 Nov 2011 14:23:45 -0800, mike <spa...@gmail.com> put
finger to keyboard and composed:
Good point. I'd look for the remote sensor, usually a 3-pin device.
Standard pinout would be Gnd, Vcc, Output, not necessarily in that
order.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

Plai...@yawhoo.com

unread,
Nov 16, 2011, 2:25:32 PM11/16/11
to
Vizio USUALLY uses a 5 volt standby supply. Many manufacturers label
the connetor pins on the output side of the power supply. Something
like 5VSB is a solid clue that is the standby supply voltage.

PlainBill
0 new messages