Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Yamaha CDV-1600 LD player
43 views
Skip to first unread message
Cydrome Leader
Oct 10, 2016, 6:06:51 PM10/10/16
to
Anybody here know the correct belt sizes or part numbers for a Yamaha
CVD-1600 CD/laserdisc player?
I need both belts, one for tray mechanism and other for the laser
assembly. One belt melted the other disintegrated.
Worst case, I can measure and guestimate once getting an worthwhile belt
order in place (might as well do the tape deck and VCRs at the same time).
CVD-1600 CD/laserdisc player?
I need both belts, one for tray mechanism and other for the laser
assembly. One belt melted the other disintegrated.
Worst case, I can measure and guestimate once getting an worthwhile belt
order in place (might as well do the tape deck and VCRs at the same time).
Bruce Esquibel
Oct 11, 2016, 9:29:03 AM10/11/16
to
http://www.target.com/p/rubber-bands-assort-sizes-7-4oz-up/-/A-16603894
Go find that, pick out a couple that comes close, make sure the rest of
the unit works, then waste time trying to find real belts.
Even with OEM part numbers in hand, you still aren't going to find them.
I never remember seeing belt sizes listed in the service manuals for any
player.
So if the originals are that bad, get the Target universal belt kit, find
the ones that come the closest, make measurements while fresh then track
down a proper source. If they are just loading belts, you can probably leave
the rubberbands in and just replace them every few months.
Don't laugh at that Target option, the dime sized ones in the collection
work great on those drawer model cd/dvd burners for computers. I got one in
my Pioneer burner from 2005 and it's been like 2 years now.
It'll be the best $1.87 you ever spent.
-bruce
b...@ripco.com
Cydrome Leader
Oct 11, 2016, 3:03:39 PM10/11/16
to
Bruce Esquibel <b...@ripco.com> wrote:
> Cydrome Leader <pres...@mungepanix.com> wrote:
>> Anybody here know the correct belt sizes or part numbers for a Yamaha
>> CVD-1600 CD/laserdisc player?
>
>> I need both belts, one for tray mechanism and other for the laser
>> assembly. One belt melted the other disintegrated.
>
>> Worst case, I can measure and guestimate once getting an worthwhile belt
>> order in place (might as well do the tape deck and VCRs at the same time).
>
>
> It's probably a CDV-1600, not CVD.
Yeah, cdv, or whatever. I was sort of hoping the n cook guy would have the
> Cydrome Leader <pres...@mungepanix.com> wrote:
>> Anybody here know the correct belt sizes or part numbers for a Yamaha
>> CVD-1600 CD/laserdisc player?
>
>> I need both belts, one for tray mechanism and other for the laser
>> assembly. One belt melted the other disintegrated.
>
>> Worst case, I can measure and guestimate once getting an worthwhile belt
>> order in place (might as well do the tape deck and VCRs at the same time).
>
>
> It's probably a CDV-1600, not CVD.
data memorized on this all.
> http://www.target.com/p/rubber-bands-assort-sizes-7-4oz-up/-/A-16603894
>
> Go find that, pick out a couple that comes close, make sure the rest of
> the unit works, then waste time trying to find real belts.
That's how I determined the unit works otherwise and deserves a proper
repair. The tray can be manually operated and the mechanism that ramps the
clamp assembly up and down is gear driven and works too.
> Even with OEM part numbers in hand, you still aren't going to find them.
>
> I never remember seeing belt sizes listed in the service manuals for any
> player.
referenced to Russel or somebody else. Some chatter came up here or
another group where PRB bought Russel or something like that and they
claim to still be in business. I'm sort of curious to see how old the
belts they ship out are. Are they just dried up, melted or just staning
the yellow plastic back they come in? The whole belt measuring slide rule
tool -5% should be fine in the other tape decks.
> So if the originals are that bad, get the Target universal belt kit, find
> the ones that come the closest, make measurements while fresh then track
> down a proper source. If they are just loading belts, you can probably leave
> the rubberbands in and just replace them every few months.
front bezel. My spring tools won't even fit in there, will have to bendup
paperclips or something.
Cydrome Leader
Oct 11, 2016, 4:27:02 PM10/11/16
to
Cydrome Leader <pres...@mungepanix.com> wrote:
> Bruce Esquibel <b...@ripco.com> wrote:
>> Cydrome Leader <pres...@mungepanix.com> wrote:
>>> Anybody here know the correct belt sizes or part numbers for a Yamaha
>>> CVD-1600 CD/laserdisc player?
>>
>>> I need both belts, one for tray mechanism and other for the laser
>>> assembly. One belt melted the other disintegrated.
>>
>>> Worst case, I can measure and guestimate once getting an worthwhile belt
>>> order in place (might as well do the tape deck and VCRs at the same time).
>>
>>
>> It's probably a CDV-1600, not CVD.
>
> Yeah, cdv, or whatever. I was sort of hoping the n cook guy would have the
> data memorized on this all.
>
>> http://www.target.com/p/rubber-bands-assort-sizes-7-4oz-up/-/A-16603894
>>
>> Go find that, pick out a couple that comes close, make sure the rest of
>> the unit works, then waste time trying to find real belts.
>
> The laser assembly is running with a doubled over skinny rubber band.
> That's how I determined the unit works otherwise and deserves a proper
> repair. The tray can be manually operated and the mechanism that ramps the
> clamp assembly up and down is gear driven and works too.
This was just too silly to not share as a video
> Bruce Esquibel <b...@ripco.com> wrote:
>> Cydrome Leader <pres...@mungepanix.com> wrote:
>>> Anybody here know the correct belt sizes or part numbers for a Yamaha
>>> CVD-1600 CD/laserdisc player?
>>
>>> I need both belts, one for tray mechanism and other for the laser
>>> assembly. One belt melted the other disintegrated.
>>
>>> Worst case, I can measure and guestimate once getting an worthwhile belt
>>> order in place (might as well do the tape deck and VCRs at the same time).
>>
>>
>> It's probably a CDV-1600, not CVD.
>
> Yeah, cdv, or whatever. I was sort of hoping the n cook guy would have the
> data memorized on this all.
>
>> http://www.target.com/p/rubber-bands-assort-sizes-7-4oz-up/-/A-16603894
>>
>> Go find that, pick out a couple that comes close, make sure the rest of
>> the unit works, then waste time trying to find real belts.
>
> The laser assembly is running with a doubled over skinny rubber band.
> That's how I determined the unit works otherwise and deserves a proper
> repair. The tray can be manually operated and the mechanism that ramps the
> clamp assembly up and down is gear driven and works too.
https://vimeo.com/186477070
dansabr...@yahoo.com
Oct 11, 2016, 4:40:41 PM10/11/16
to
Use a two pencils inside the belt and pull to the side. Measure the distance with a ruler and that should give you an estimate of the size. For the type of usage, the PRB/Russel belt would be either an SCA or SCQ type. I would guess that the measurement will be around 3. Try either an SCA3.0 or SCQ3.0
Note that the 3.0 in this case would be a circumference measurement.
Dan
Note that the 3.0 in this case would be a circumference measurement.
Dan
Jon Elson
Oct 11, 2016, 6:24:10 PM10/11/16
to
I was amazed they actually work, but they seem to do fine. Digi-Key seems
to ship a lot of stuff in IC tubes with square cross-section reddish rubber
bands holding the plugs in the ends, that are quite similar in size to the
belts used in many of these decks.
Jon
dansabr...@yahoo.com
Oct 11, 2016, 7:05:39 PM10/11/16
to
In this case this is a loading belt which is not particularly important. For "drive" belts though, a more precise belt is usually required.
Cydrome Leader
Oct 11, 2016, 7:50:40 PM10/11/16
to
dansabr...@yahoo.com wrote:
> In this case this is a loading belt which is not particularly important. For "drive" belts though, a more precise belt is usually required.
The point here is to try as best as I can to identify the "best" belts and
> In this case this is a loading belt which is not particularly important. For "drive" belts though, a more precise belt is usually required.
replace all the belts and tires in my stuff at once to justify an order of
these things.
Years, or decades ago you could pick this stuff up at a counter, one at a
time if needed with no issues. It's all internet/mail order now.
dansabr...@yahoo.com
Oct 11, 2016, 7:54:37 PM10/11/16
to
I still have a supply of good belts. There aren't too many in this unit. Measure the belts if you can. They are still available from suppliers. Believe it or not there are still a large number of VCRs being used.
Dan
Dan
N_Cook
Oct 12, 2016, 3:19:04 AM10/12/16
to
rubber, will take a lot more temperature than latex rubber and different
smell. Not full grade high temp silicone , but dynamically and
degradation purposes much better than latex. Price of latex gone up and
silicone gone down recently. Its creeping into a lot of areas where
latex was previously used for bands
Bruce Esquibel
Oct 12, 2016, 7:54:34 AM10/12/16
to
Cydrome Leader <pres...@mungepanix.com> wrote:
> Years, or decades ago you could pick this stuff up at a counter, one at a
> time if needed with no issues. It's all internet/mail order now.
True but I'm still wondering if anything is available these days.
> Years, or decades ago you could pick this stuff up at a counter, one at a
> time if needed with no issues. It's all internet/mail order now.
http://russellind.com/downl.htm
It does look like they combined, besides Russells line, they show the EVG
and PRB listings, but I'm wondering if that is all nostalga. The web page
itself hasn't been updated since 2009 and some of those catalogs are 10+
years old.
Just saying, because it is still listed doesn't equal it being available.
Although it does look like there is a belt market out there, it seems most
places specialize in cassette and turntable ones.
I didn't dig down real deep but it looks like MCM, which I used to order
belts and wheels by the pound (well, a lot), just have a few general
assortments of square and round ones, kits. Guess the days of page after
page of flats, rounds and squares are history.
-bruce
b...@ripco.com
dansabr...@yahoo.com
Oct 12, 2016, 8:20:06 AM10/12/16
to
The need for many different sizes of belts has gone. There are fewer pieces of equipment that require belts these days. CD and DVD players being the most common now, require only a few sizes as most are standard. Aside from older units that some are trying to maintain, there are few new items needing belts.
There are newer models that use direct geared drives now too.
As time goes on, there will be fewer suppliers, but these belts are still available.
Those of us that still work on the older gear still use them. I stock quite an assortment because it was easier and cheaper to have the stock. Not all services work that way though. The main issue is to keep the belts from deteriorating over time.
Dan
There are newer models that use direct geared drives now too.
As time goes on, there will be fewer suppliers, but these belts are still available.
Those of us that still work on the older gear still use them. I stock quite an assortment because it was easier and cheaper to have the stock. Not all services work that way though. The main issue is to keep the belts from deteriorating over time.
Dan
0 new messages