Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Electronics Engineer just starting in the world of industrial PCBA fixing

22 views
Skip to first unread message

Jorge Ricardo Rodriguez

unread,
Aug 24, 2016, 11:48:41 AM8/24/16
to
Hi all,
I am just starting into this world of fixing industrial PCBAs.

As you may know, in this kind of repairing, normally there are no schematics available, most of the times you do not have a PCBA in good conditions to use as reference of what is wrong and what is fine.

I just knew about the VI technique for these cases which is useful, but I would like to know more about it and about more other techniques to use in these cases to debug industrial PCBAs.

Do someone of you have blogs/books/nice online courses with useful information?

I would highly appreciate your help and advises on this topic.

Thanks!
Regards

TMI

unread,
Aug 27, 2016, 2:07:19 PM8/27/16
to

> I just knew about the VI technique for these cases which is useful, but I would like to know more about it and about more other techniques to use in these cases to debug industrial PCBAs.

Try to get hold of a Huntron, Salig system 8, B&K 545 or the Tek / Huntron box and grunt your way through it.

TM

Look165

unread,
Aug 27, 2016, 3:44:54 PM8/27/16
to

Did you hear about reverse engineering ?

Jorge Ricardo Rodriguez a écrit :
> Hi all,
> I am just starting into this world of fixing industrial PCBAs.
>
> Thanks!
> Regards
>

0 new messages