Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Toshiba TV won't turn on after power outage

180 views
Skip to first unread message

spamtrap1888

unread,
Apr 6, 2011, 10:39:51 PM4/6/11
to
The weather was beautiful all day -- just the typical Pacific Gas and
Electric service interruption, so it's hard to figure how it could
have been zapped with a surge. Something squeals when the set is
plugged into the power strip, but that's the only response.

Any ideas where to start?

Is there likely to be a reset button or blown fuse? It's a Toshiba
27AF43, if that's any help.

Sylvia Else

unread,
Apr 7, 2011, 12:22:36 AM4/7/11
to

Can't help regarding repairing it, but you could try to find out from
Pacific Gas and Electric why the interruption occurred. Surges don't
necessarily come from lightening. For example having a high voltage
cable break and land on a lower voltage cable could cause one.

Whether you'd have any redress against the power company if it turns out
there was a surge would depend on your jurisdiction.

Sylvia.


hrho...@att.net

unread,
Apr 7, 2011, 10:58:23 AM4/7/11
to

Surges can't come from LIGHTENING, that's what happened to Michael
Jackson's face. Surges can come from LIGHTNING.

spamtrap1888

unread,
Apr 7, 2011, 3:00:13 PM4/7/11
to

A good thought.

My local TV repair thinks the high voltage section may be damaged, but
won't speculate as to the cost of repair until I bring in this 90 lb
set and pay a $25 estimate fee.

I found a service manual online that I didn't have to sign my life
away to download. There is a fuse, but it is in series with a 1.5meg
resistor across the AC input. I measure the ohmmage across the power
cord and voila! 1.47 megohms or so. So the fuse is not blown.

Can anyone agree that there must be something wrong with the high
voltage, and speculate how extensive/expensive fixing it might be?

Scott

unread,
Apr 7, 2011, 5:25:28 PM4/7/11
to

"spamtrap1888" <spamtr...@gmail.com> wrote in message
news:944f7eb7-1bba-4625...@p3g2000vbv.googlegroups.com...

If the "power strip" mentioned is a battery-powered, uninterrupted power
supply (UPS) with surge protection, it may have tripped on the brief service
interruption and not properly returned to AC Line power. The squeal may be
an alarm that the battery is too weak to provide enough power.

Just a thought, since this has been happening to my UPS.
Scott


Sylvia Else

unread,
Apr 7, 2011, 9:03:47 PM4/7/11
to

Oh, give it a rest.

Sylvia.

chuck

unread,
Apr 8, 2011, 9:29:50 AM4/8/11
to

The squeal is probably coming from the switched power supply with a
dead short at one of its outputs. Probably a shorted horizontal
output transistor. What caused this transistor to short can be
anything from a broken solder connection, or an open electrolytic or
hv capacitor, to a shoted yoke or ho transformer. Chuck

spamtrap1888

unread,
Apr 8, 2011, 11:18:29 AM4/8/11
to

May God bless you Chuck, and your posterity.

0 new messages