Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

RCA chassis ATC010A

7 views
Skip to first unread message

Gary Woodruff

unread,
Jun 3, 2010, 11:18:55 AM6/3/10
to
Hello, I have an RCA chassis # ATC010A. The set will power up and
display a pic for about 5 seconds before turning off. I can hold any
front panel button (vol, channel, etc) and the set will stay powered on
until the button is released. I know these sets have problems with the
front panel assembly being defective and causing on/off by itself
problems. I tried powering on set and disconnecting the cable to the
front panel button assembly but the set still powers off after a 5
seconds of picture. I have also checked for cold solder joints and
replaced the HOT. Anyone have any suggestions or a print?

Thanks, Gary

Franc Zabkar

unread,
Jun 4, 2010, 7:32:48 PM6/4/10
to
On Thu, 03 Jun 2010 11:18:55 -0400, Gary Woodruff
<woodruf...@gmail.com> put finger to keyboard and composed:

>Anyone have any suggestions or a print?

A circuit diagram is available here:
http://www.clubdediagramas.com/archivo/televisores-tv-a5/rca-m98/tv-32v434tyx5-x6-ch-atc010apdf-f85913.html

However, you need to register.

... or not?
http://www.bugmenot.com/view/clubdediagramas.com

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

catpandaddy

unread,
Jun 8, 2010, 1:21:45 PM6/8/10
to

I ONCE HAD A DICK IN MY MOUTH AND I THOUGHT IT TASTED LIKE HEAVEN.

0 new messages