info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
SRS SR560 preamp repair / upgrade
23 views
Skip to first unread message
Rana Adhikari
Dec 31, 2017, 5:41:03 PM12/31/17
to
I have a number of the Stanford Research Systems SR560 voltage pre-amplifiers in my labs. I also see them in use in my scientific labs around the world.
A common issue with them is the front-end gets noisy, going from an input referred noise of ~5 nV/sqrt(Hz) to ~50. In this case, what we usually do is scour the internet for some obsolete NPD 5565 (dual JFET) to swap in and this fixes the problem.
It seems to me like the LSK389 is a better part: its supposed have a voltage noise 5x smaller. Does anyone have any experience with this or possibly something similar when doing SR560 repair?
A common issue with them is the front-end gets noisy, going from an input referred noise of ~5 nV/sqrt(Hz) to ~50. In this case, what we usually do is scour the internet for some obsolete NPD 5565 (dual JFET) to swap in and this fixes the problem.
It seems to me like the LSK389 is a better part: its supposed have a voltage noise 5x smaller. Does anyone have any experience with this or possibly something similar when doing SR560 repair?
Ron D.
Jan 1, 2018, 10:37:42 PM1/1/18
to
Both in stock at utsource.net. Nice place to deal with for obsolete parts.
0 new messages