info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
AR CD-04 CD player display
30 views
Skip to first unread message
Tim Schwartz
Feb 21, 2019, 3:19:34 PM2/21/19
to
Hello all,
A customer has an AR CD-04 with a bad display. This is a 4 digit green
LED display on a small board that mounts to the front panel board.
While the machine is a Philips/Magnavox based player, I do not know
what an equivalent model that might share the same display is.
Since I'd guess that many of these have been scrapped because of a
defective CDM-2 mechanism, I'm hoping someone has saved a chassis that
might have a good display or display board that they would be willing to
sell me.
Gentlemen, please check you junk rooms!
Regards,
Tim Schawrtz
Bristol Electronics
Ho-Ho-Kus, New Jersey
A customer has an AR CD-04 with a bad display. This is a 4 digit green
LED display on a small board that mounts to the front panel board.
While the machine is a Philips/Magnavox based player, I do not know
what an equivalent model that might share the same display is.
Since I'd guess that many of these have been scrapped because of a
defective CDM-2 mechanism, I'm hoping someone has saved a chassis that
might have a good display or display board that they would be willing to
sell me.
Gentlemen, please check you junk rooms!
Regards,
Tim Schawrtz
Bristol Electronics
Ho-Ho-Kus, New Jersey
peterw...@gmail.com
Feb 21, 2019, 3:53:42 PM2/21/19
to
https://www.google.com/search?rlz=1C1GCEU_enUS821US821&q=4-digit+LED+display&tbm=isch&source=univ&sa=X&ved=2ahUKEwjFtaOy2s3gAhVION8KHenJD-0QsAR6BAgAEAE&biw=1920&bih=969
Maybe just replace the LED Display?
Been there, done that, although not necessarily with the same color.
Peter Wieck
Melrose Park, PA
Maybe just replace the LED Display?
Been there, done that, although not necessarily with the same color.
Peter Wieck
Melrose Park, PA
Look165
Feb 21, 2019, 4:02:56 PM2/21/19
to
Maybe the flat ribbon cable ; just shrten it at the end.
Tim Schwartz
Feb 21, 2019, 7:35:26 PM2/21/19
to
Not possible to change the display to something else. This is a welded
construction type with a 'blob chip' on the back of the board that
interfaced to the microprocessor. Must be original type.
Thanks for the thought,
Tim
Bristol Electronics
construction type with a 'blob chip' on the back of the board that
interfaced to the microprocessor. Must be original type.
Thanks for the thought,
Tim
Bristol Electronics
Adam
Feb 22, 2019, 12:23:48 AM2/22/19
to
On 2019-02-21, Tim Schwartz <t...@bristolnj.com> wrote:
> A customer has an AR CD-04 with a bad display. This is a 4 digit green
> LED display on a small board that mounts to the front panel board.
>
> While the machine is a Philips/Magnavox based player, I do not know
> what an equivalent model that might share the same display is.
I believe the Philips CD160, CD460, CD560, Magnavox CDB460, CDB560 and
> A customer has an AR CD-04 with a bad display. This is a 4 digit green
> LED display on a small board that mounts to the front panel board.
>
> While the machine is a Philips/Magnavox based player, I do not know
> what an equivalent model that might share the same display is.
Sylvania CD1650 have this display. There are a few on eBay but they're
not cheap!
There is a design for a DIY retrofit which may or may not be suitable:
https://www.diyaudio.com/forums/digital-source/259790-nsm4202a-led-display-module-replacement-philips-sony-cdm-transports.html
-- Adam
0 new messages