On Thu, 25 Aug 2016 02:00:32 +0100, "Gareth Magennis"
<
soundser...@outlook.com> wrote:
>
>
>I've been on this planet a few years now, and have yet to find a situation
>where Superglue is a good idea.
It's never worked for me, either.
I've tried using less and less, and more.
>It pretty much just does not work, except for sticking your fingers
>together.
It doesn't do that either, for me.
Is it just a big scam, propelled by the enormous advertising campaign
years ago, or are there people it works for?
My mother had some Duco Cement, and that never worked for me either.
>Hot melt glue sometimes works, but does not adhere well to many surfaces.
>
>
>Silicone glue/sealant pretty much sticks to everything, is flexible and
You're talking about GE silicone sealant that comes in white, black**,
clear, and iirc silver??? **Black is only sold at autoparts
stores.
>shockproof, and can be peeled off without damaging anything if you need to
>have another go.
>Win, win, win, in my book, I rarely use anything else now.
I use it too, but I also use:
Contact cement is good for cloth etc. because it bends, even after
drying. It used to be Weldwood in the red tube and not Weldwood in
the white tube, but that was decades ago and has probably changed.
Android cement is good for almost everything, not as strong as epoxy
but strong, and yet can be broken apart if you want later. Dries
quickly, smells good. Only sold in hobby stores. Tube never dries
out if you keep it sealed. I used one big tube for 20 years. (I
only learned about it because the hardware store at Myrtle Ave. in
downtown Brookly had two cartons of them on sale cheap because they
were all beat up, each tube had been squeezed and bent, but that's the
tube that lasted 20 years.
Five-minute epoxee in the syringe is very good for many many things.
PC-7 and PC-11, very very strong, sticks to almost anything including
glass (at least the demo showed that. I've never needed to glue
anything to glass.) Moldable, space filler. Can be applied to a
dripping drain (because the drain had a hole in it and the faucet
washer was no good) and still dries and stops the leak. I lost the
cap to a wine sack, put vaseline on the threads, molded some PC-7
around it, put a hole through for a string, and when it tried, I
unscrewed it and now it's a cap. I patched a leaking pot and then
forgot and boiled all the water out, but it still didn't leak. I
even made replacement teeth on the gear of a commercial "egg" mixer,
but that only worked for a couple minutes. (I should have roughed up
the glossy area where most of the glue went, but I was only 19 y.o.)
I've never used PC-11 iirc, and I don't understand the difference. The
label says PC-11 is for water areas -- well I guess that's the
difference but 7 seemed to work well there too. 7 is dark grey and 11
is white.
>
>
>
>Gareth.
>