Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

black and decker coffee pot wiring diagram

134 views
Skip to first unread message

Morris

unread,
Oct 29, 2014, 6:37:05 PM10/29/14
to
I have a Black and Decker coffee maker model # CM1050B type 2. I need the
value of the #1 resistor on the control board #HET-BST CM1050-P. Resistor is
burned and cracked. It looks like a one watt ceramic resistor. Any help will
be appreciated.

--


N_Cook

unread,
Oct 30, 2014, 4:25:43 AM10/30/14
to
Carefully desolder the parts and measure the ohmage of the 2 parts,
unlikely to be more than a factor of 2 ,up or down, of the original.
Does that value make ballbark sense with the associated control device.
Replace whatever control device that has also failed.
Then a matter of treading carefully, powering up with a variac and
monitoring what happens

micky

unread,
Oct 31, 2014, 12:46:53 AM10/31/14
to
On Thu, 30 Oct 2014 08:25:39 +0000, N_Cook <div...@tcp.co.uk> wrote:

>On 29/10/2014 22:37, Morris wrote:
>> I have a Black and Decker coffee maker model # CM1050B type 2. I need the
>> value of the #1 resistor on the control board #HET-BST CM1050-P.
>> Resistor is
>> burned and cracked. It looks like a one watt ceramic resistor. Any help
>> will
>> be appreciated.
>
>Carefully desolder the parts

Are they soldered to begin with? They're fused, but I've never seen
solder. My coffee makers may have been older than this one. .
0 new messages